
MicroSquirt V3 is a MegaSquirt-family engine-management product. Compact MicroSquirt V3 ECU; its AMPSEAL connector is not pin-compatible with the later MS3Pro Mini despite similar physical appearance. Model source.
Identification and software
Record the ECU label, processor generation, board revision, firmware and installed hardware modifications. Calibration software and firmware must match the hardware. DIYAutoTune software and firmware · Model-specific information.
Wiring and pinout
Use the matching model document and wiring or support reference; the manufacturer manual index distinguishes wire-in and vehicle-specific variants. Check connector orientation, wiring changes, fuse ratings and output configuration before connecting loads; matching cases or software families do not establish identical pin functions.
See the MegaSquirt and MS3Pro family guide. Sources reviewed 17 November 2026.
Engine-control hardware
DIYAutoTune lists two high-impedance injector outputs and two dedicated ignition outputs, plus two general-purpose outputs that can be repurposed as ignition. It has two VR-conditioned inputs and an optoisolated RPM input. Different firmware can instead use the same hardware as a transmission controller or CAN I/O device; identify the firmware before assuming an engine-control installation. MicroSquirt V3 product specification.