Sniper 2 is the second generation of Holley's integrated throttle-body EFI system; the ECU and throttle body are a package rather than a generic HP or Terminator module. The 550-511 product information describes updated ECU electronics and a main harness with HyperSpark distributor support.
Wiring and ignition
Holley's system installation diagrams identify a 16-pin main connector, separate CAN and six-pin optional I/O harness for the documented 550-511 arrangement. Its ignition options guide distinguishes a coil-minus RPM-only input from supported timing-control configurations. Verify the specific throttle body, harness, ignition and sensor setup.
See the Holley EFI manufacturer index. Sources reviewed 17 November 2026.