Page organisation in this revision
- Page type
- Reference hub
- Subject
- Engine ECU
- Parent
- MicroTech standalone ECUs
- Applies to
- No ECU-specific applicability
- Tool groups
- None
- Manufacturers
- None
Changes from revision 1 to revision 3
Removed text is struck through; added text is highlighted.
MicroTech LT-15c is a standalone or earlier programmable engine-management system. The LT-15c appears in MicroTech's wideband wiring guide. Its output capability and exact ECU connector functions require the specific hardware and engine wiring diagram. Model-specific information.
Identification and features
Record the ECU label, model, part number, hardware revision, firmware, configured injectors, ignition hardware and loom before comparing systems. Some outputs can be reassigned; hardware, software, current limits and engine-specific options determine what is actually available.
Wiring and pinout
The MicroTech LSU 4.9 wideband guide identifies the LT-15c oxygen-sensor connection; it is not a complete ECU pinout. The full ECU wiring diagram has not yet been verified for this page. Obtain the diagram matching the exact unit, engine configuration and harness from MicroTech before wiring.Consult the MicroTech LT-15c wiring and documentation source and identify the exact connector face, part and version. Do not apply wiring from a similarly named model. If an exact drawing is unavailable for the unit at hand, obtain it from the manufacturer or supplier before making connections.Further information
MicroTech LT-15c model informationLSU 4.9 wideband connection guide (partial wiring only)MicroTech manufacturer indexWideband controller connectionsMicroTech's LSU 4.9 wideband kit guide identifies these 15C ECU connections. The guide says to splice the LSU controller's brown ground lead into the matching brown sensor-ground wire on the ECU's 24-way main harness. This table covers the wideband signal and ground only, not the full ECU connector.ECU wireFunctionBlack/redOxygen sensor inputBrownOxygen sensor groundMicroTech LT-15c model informationWiring, manuals or technical archiveMicroTech manufacturer index
Rendered revisions
Open each version to inspect formatting, tables and photographs.
Revision 1: MicroTech LT-15c
MicroTech LT-15c is a standalone or earlier programmable engine-management system. The LT-15c appears in MicroTech's wideband wiring guide. Its output capability and exact ECU connector functions require the specific hardware and engine wiring diagram. Model-specific information.
Identification and features
Record the ECU label, model, part number, hardware revision, firmware, configured injectors, ignition hardware and loom before comparing systems. Some outputs can be reassigned; hardware, software, current limits and engine-specific options determine what is actually available.
Wiring and pinout
Consult the MicroTech LT-15c wiring and documentation source and identify the exact connector face, part and version. Do not apply wiring from a similarly named model. If an exact drawing is unavailable for the unit at hand, obtain it from the manufacturer or supplier before making connections.
Further information
Revision 3: MicroTech LT-15c
MicroTech LT-15c is a standalone or earlier programmable engine-management system. The LT-15c appears in MicroTech's wideband wiring guide. Its output capability and exact ECU connector functions require the specific hardware and engine wiring diagram. Model-specific information.
Identification and features
Record the ECU label, model, part number, hardware revision, firmware, configured injectors, ignition hardware and loom before comparing systems. Some outputs can be reassigned; hardware, software, current limits and engine-specific options determine what is actually available.
Wiring and pinout
The MicroTech LSU 4.9 wideband guide identifies the LT-15c oxygen-sensor connection; it is not a complete ECU pinout. The full ECU wiring diagram has not yet been verified for this page. Obtain the diagram matching the exact unit, engine configuration and harness from MicroTech before wiring.
Further information
Wideband controller connections
MicroTech's LSU 4.9 wideband kit guide identifies these 15C ECU connections. The guide says to splice the LSU controller's brown ground lead into the matching brown sensor-ground wire on the ECU's 24-way main harness. This table covers the wideband signal and ground only, not the full ECU connector.
| ECU wire | Function |
|---|
| Black/red | Oxygen sensor input |
| Brown | Oxygen sensor ground |