Page organisation in this revision
- Page type
- Reference hub
- Subject
- Engine ECU
- Parent
- MicroTech standalone ECUs
- Applies to
- No ECU-specific applicability
- Tool groups
- None
- Manufacturers
- None
Changes from revision 1 to revision 4
Removed text is struck through; added text is highlighted.
MicroTech LT-16c is a standalone or earlier programmable engine-management system. LT-16c is listed with eight injector and eight ignition outputs, supporting sequential operation on specified four-, six- and eight-cylinder and two- to four-rotor engines. Model-specific information.
Identification and features
Record the ECU label, model, part number, hardware revision, firmware, configured injectors, ignition hardware and loom before comparing systems. Some outputs can be reassigned; hardware, software, current limits and engine-specific options determine what is actually available.
Wiring and pinout
The MicroTech LSU 4.9 wideband guide identifies the LT-16c oxygen-sensor connection; it is not a complete ECU pinout. The full ECU wiring diagram has not yet been verified for this page. Obtain the diagram matching the exact unit, engine configuration and harness from MicroTech before wiring.Consult the MicroTech LT-16c wiring and documentation source and identify the exact connector face, part and version. Do not apply wiring from a similarly named model. If an exact drawing is unavailable for the unit at hand, obtain it from the manufacturer or supplier before making connections.Further information
MicroTech LT-16c model informationLSU 4.9 wideband connection guide (partial wiring only)MicroTech manufacturer indexWideband controller connectionsMicroTech's LSU 4.9 wideband kit guide identifies these 16C ECU connections. The guide locates the dedicated oxygen-sensor ground on the 12-way auxiliary connector next to the handset port. This table covers the wideband signal and ground only, not the full ECU connector.ECU wireFunctionBlack/redOxygen sensor inputBrownOxygen sensor groundDriveshaft speed sensor connectionsMicroTech's driveshaft sensor kit guide lists these 16C harness connections for compatible units manufactured from 2018 onward. The guide says earlier units require a software update. This is a sensor wiring table, not a complete ECU pinout.Sensor wireSensor functionECU harness wireECU functionBlueGroundBlackGroundBrown+5 VBlue+5 V sensor supplyBlackSpeed signalBlue/whiteDriveshaft inputMicroTech LT-16c model informationWiring, manuals or technical archiveMicroTech manufacturer index
Rendered revisions
Open each version to inspect formatting, tables and photographs.
Revision 1: MicroTech LT-16c
MicroTech LT-16c is a standalone or earlier programmable engine-management system. LT-16c is listed with eight injector and eight ignition outputs, supporting sequential operation on specified four-, six- and eight-cylinder and two- to four-rotor engines. Model-specific information.
Identification and features
Record the ECU label, model, part number, hardware revision, firmware, configured injectors, ignition hardware and loom before comparing systems. Some outputs can be reassigned; hardware, software, current limits and engine-specific options determine what is actually available.
Wiring and pinout
Consult the MicroTech LT-16c wiring and documentation source and identify the exact connector face, part and version. Do not apply wiring from a similarly named model. If an exact drawing is unavailable for the unit at hand, obtain it from the manufacturer or supplier before making connections.
Further information
Revision 4: MicroTech LT-16c
MicroTech LT-16c is a standalone or earlier programmable engine-management system. LT-16c is listed with eight injector and eight ignition outputs, supporting sequential operation on specified four-, six- and eight-cylinder and two- to four-rotor engines. Model-specific information.
Identification and features
Record the ECU label, model, part number, hardware revision, firmware, configured injectors, ignition hardware and loom before comparing systems. Some outputs can be reassigned; hardware, software, current limits and engine-specific options determine what is actually available.
Wiring and pinout
The MicroTech LSU 4.9 wideband guide identifies the LT-16c oxygen-sensor connection; it is not a complete ECU pinout. The full ECU wiring diagram has not yet been verified for this page. Obtain the diagram matching the exact unit, engine configuration and harness from MicroTech before wiring.
Further information
Wideband controller connections
MicroTech's LSU 4.9 wideband kit guide identifies these 16C ECU connections. The guide locates the dedicated oxygen-sensor ground on the 12-way auxiliary connector next to the handset port. This table covers the wideband signal and ground only, not the full ECU connector.
| ECU wire | Function |
|---|
| Black/red | Oxygen sensor input |
| Brown | Oxygen sensor ground |
Driveshaft speed sensor connections
MicroTech's driveshaft sensor kit guide lists these 16C harness connections for compatible units manufactured from 2018 onward. The guide says earlier units require a software update. This is a sensor wiring table, not a complete ECU pinout.
| Sensor wire | Sensor function | ECU harness wire | ECU function |
|---|
| Blue | Ground | Black | Ground |
| Brown | +5 V | Blue | +5 V sensor supply |
| Black | Speed signal | Blue/white | Driveshaft input |