Page organisation in this revision
- Page type
- Reference hub
- Subject
- Engine ECU
- Parent
- Adaptronic standalone ECUs
- Applies to
- No ECU-specific applicability
- Tool groups
- None
- Manufacturers
- None
Changes from revision 1 to revision 2
Removed text is struck through; added text is highlighted.
Adaptronic M1200 is a standalone or earlier programmable engine-management system. Modular M1200 universal wire-in ECU; Haltech retains a model-specific startup guide, pinout and basemap. Its 26-way connector diagram identifies four injectors; high-impedance injectors are specified in that diagram. Model-specific information.
Identification and features
Record the ECU label, model, part number, hardware revision, firmware, configured injectors, ignition hardware and loom before comparing systems. Some outputs can be reassigned; hardware, software, current limits and engine-specific options determine what is actually available.
Wiring and pinout
Consult the Adaptronic M1200 wiring and documentation source and identify the exact connector face, part and version. Do not apply wiring from a similarly named model. If an exact drawing is unavailable for the unit at hand, obtain it from the manufacturer or supplier before making connections.
Further information
Adaptronic M1200 model informationWiring, manuals or technical archiveAdaptronic manufacturer index
Manufacturer connector pinoutsTranscribed from the Adaptronic M1200 wiring diagrams in Haltech's archive. The source marks optional functions in red; optionality is noted below. The drawing says pins 1A, 2I and 2S must not be connected. The 26-way injector outputs are specified for high-impedance injectors, 2 A maximum. The diagrams require external ignition drivers or coils with built-in igniters; see the source for wiring orientation, wire colours, current limits, power supplies and ECU configuration.22-way connectorPinFunction in drawing1ADo not connect1BIgnition +12 V1CServo (optional)1DAuxiliary 21EAuxiliary 51FIgnition 31GIgnition 11HIgnition 21ICAN low (optional)1JAuxiliary 31KCAN high (optional)1LAuxiliary 61MVehicle speed sensor1NFuel pressure (optional)1ODigital input 3 (optional)1PDigital input 1 (optional)1QDigital input 2 (optional)1RAuxiliary 71SDigital input 4 (optional)1TIgnition 41UTPS 2 (optional)1VFuel temperature (optional)26-way connectorPinFunction in drawing2APower ground2BPower ground2CSensor ground2DSensor ground2ECAS 12FCAS 3 (optional)2GCAS 2 (optional)2HOil temperature (optional)2IDo not connect2JKnock (optional)2K5 V sensor supply2LOil pressure (optional)2MThrottle position2NOxygen 1 (optional)2OIMAP / external MAP input (optional)2PManifold air temperature2QCoolant temperature2RTachometer (optional)2SDo not connect2TECCS / EFI / fuel pump relay output2UInjector 12VInjector 42WAuxiliary 12XAuxiliary 42YInjector 22ZInjector 3
Rendered revisions
Open each version to inspect formatting, tables and photographs.
Revision 1: Adaptronic M1200
Adaptronic M1200 is a standalone or earlier programmable engine-management system. Modular M1200 universal wire-in ECU; Haltech retains a model-specific startup guide, pinout and basemap. Its 26-way connector diagram identifies four injectors; high-impedance injectors are specified in that diagram. Model-specific information.
Identification and features
Record the ECU label, model, part number, hardware revision, firmware, configured injectors, ignition hardware and loom before comparing systems. Some outputs can be reassigned; hardware, software, current limits and engine-specific options determine what is actually available.
Wiring and pinout
Consult the Adaptronic M1200 wiring and documentation source and identify the exact connector face, part and version. Do not apply wiring from a similarly named model. If an exact drawing is unavailable for the unit at hand, obtain it from the manufacturer or supplier before making connections.
Further information
Revision 2: Adaptronic M1200
Adaptronic M1200 is a standalone or earlier programmable engine-management system. Modular M1200 universal wire-in ECU; Haltech retains a model-specific startup guide, pinout and basemap. Its 26-way connector diagram identifies four injectors; high-impedance injectors are specified in that diagram. Model-specific information.
Identification and features
Record the ECU label, model, part number, hardware revision, firmware, configured injectors, ignition hardware and loom before comparing systems. Some outputs can be reassigned; hardware, software, current limits and engine-specific options determine what is actually available.
Wiring and pinout
Consult the Adaptronic M1200 wiring and documentation source and identify the exact connector face, part and version. Do not apply wiring from a similarly named model. If an exact drawing is unavailable for the unit at hand, obtain it from the manufacturer or supplier before making connections.
Further information
Manufacturer connector pinouts
Transcribed from the Adaptronic M1200 wiring diagrams in Haltech's archive. The source marks optional functions in red; optionality is noted below. The drawing says pins 1A, 2I and 2S must not be connected. The 26-way injector outputs are specified for high-impedance injectors, 2 A maximum. The diagrams require external ignition drivers or coils with built-in igniters; see the source for wiring orientation, wire colours, current limits, power supplies and ECU configuration.
22-way connector
| Pin | Function in drawing |
|---|
| 1A | Do not connect |
| 1B | Ignition +12 V |
| 1C | Servo (optional) |
| 1D | Auxiliary 2 |
| 1E | Auxiliary 5 |
| 1F | Ignition 3 |
| 1G | Ignition 1 |
| 1H | Ignition 2 |
| 1I | CAN low (optional) |
| 1J | Auxiliary 3 |
| 1K | CAN high (optional) |
| 1L | Auxiliary 6 |
| 1M | Vehicle speed sensor |
| 1N | Fuel pressure (optional) |
| 1O | Digital input 3 (optional) |
| 1P | Digital input 1 (optional) |
| 1Q | Digital input 2 (optional) |
| 1R | Auxiliary 7 |
| 1S | Digital input 4 (optional) |
| 1T | Ignition 4 |
| 1U | TPS 2 (optional) |
| 1V | Fuel temperature (optional) |
26-way connector
| Pin | Function in drawing |
|---|
| 2A | Power ground |
| 2B | Power ground |
| 2C | Sensor ground |
| 2D | Sensor ground |
| 2E | CAS 1 |
| 2F | CAS 3 (optional) |
| 2G | CAS 2 (optional) |
| 2H | Oil temperature (optional) |
| 2I | Do not connect |
| 2J | Knock (optional) |
| 2K | 5 V sensor supply |
| 2L | Oil pressure (optional) |
| 2M | Throttle position |
| 2N | Oxygen 1 (optional) |
| 2O | IMAP / external MAP input (optional) |
| 2P | Manifold air temperature |
| 2Q | Coolant temperature |
| 2R | Tachometer (optional) |
| 2S | Do not connect |
| 2T | ECCS / EFI / fuel pump relay output |
| 2U | Injector 1 |
| 2V | Injector 4 |
| 2W | Auxiliary 1 |
| 2X | Auxiliary 4 |
| 2Y | Injector 2 |
| 2Z | Injector 3 |