Autronic SM4DC is a standalone or earlier programmable engine-management system. SM4 dual-calibration version provides switch-selectable calibrations. Autronic identifies pin 39 as calibration select instead of the normal HSI3 function. Model-specific information.
Identification and features
Record the ECU label, model, part number, hardware revision, firmware, configured injectors, ignition hardware and loom before comparing systems. Some outputs can be reassigned; hardware, software, current limits and engine-specific options determine what is actually available.
SM4DC connector positions
Manufacturer function table, Autronic product data. Use the original connector drawing for orientation and output limitations. On dual-calibration versions pin 39 selects calibration rather than HSI3. Outputs may have shared alternate functions.
| Pin | Function |
|---|---|
| 1 | Ignition switch input |
| 2 | Injector 8 / switch 3 |
| 3 | Injector 7 / switch 2 |
| 4 | Injector 5 |
| 5 | Ignition 1 |
| 6 | Ignition 2 |
| 7 | Output 1 |
| 8 | Analogue 1 |
| 9 | Coolant temperature |
| 10 | HSI 1 |
| 11 | +8 V trigger supply |
| 12 | Output 8 / tacho |
| 13 | Output 6 |
| 14 | PWM 2 |
| 15 | +12 V main supply |
| 16 | Injector 4 |
| 17 | Injector 1 |
| 18 | Injector 6 / switch 1 |
| 19 | Ignition 3 |
| 20 | Output 3 |
| 21 | Throttle position |
| 22 | Signal ground |
| 23 | Air temperature |
| 24 | HSI 2 |
| 25 | Cylinder + |
| 26 | Sync + |
| 27 | Output 5 |
| 28 | PWM 1 |
| 29 | Power ground |
| 30 | +12 V RAM supply |
| 31 | Injector 3 |
| 32 | Injector 2 |
| 33 | Ignition 4 |
| 34 | Output 2 |
| 35 | Output 4 |
| 36 | +5 V sensor supply |
| 37 | Oxygen input |
| 38 | Analogue 2 |
| 39 | HSI 3 / dual-calibration select |
| 40 | Cylinder - |
| 41 | Sync - |
| 42 | Output 7 |
Wiring and pinout
Consult the Autronic SM4DC wiring and documentation source and identify the exact connector face, part and version. Do not apply wiring from a similarly named model. If an exact drawing is unavailable for the unit at hand, obtain it from the manufacturer or supplier before making connections.