Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
Autronic standalone ECUs
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

Changes from revision 1 to revision 2

Removed text is struck through; added text is highlighted.

Autronic SM4MR is a standalone or earlier programmable engine-management system. Marine SM4 with sealed anodised case; the manufacturer lists eight injector outputs and four ignition outputs. Model-specific information.

Identification and features

Record the ECU label, model, part number, hardware revision, firmware, configured injectors, ignition hardware and loom before comparing systems. Some outputs can be reassigned; hardware, software, current limits and engine-specific options determine what is actually available.

ProcessorAutronic's SM4MR product page (manufacturer documentation) gives a 16-bit Intel microcontroller running at 20 MHz. The exact part number is not stated in the sources checked.Engine applicationsThe SM4MR is the marinised version of the SM4, originally developed for international personal watercraft racing and suited to off-road racing and other high-performance motorsport. Per Autronic it supports most reciprocating engines of 1 to 8, 10, 12, 14 and 16 cylinders (two-stroke, four-stroke and rotary) and two-rotor rotary engines, with turbo boost control. Injector drivers are arranged as two groups of four with selectable peak/hold current; unused injector outputs can be reassigned as additional outputs or switch inputs. Ignition has four push-pull outputs with 3D-mappable dwell or pulse time. Main connector: 42-way sealed; serial: 8 mm 3-way sealed. Manned-aircraft use is prohibited. No engine codes are listed.Connector pinoutThe 42-position function table is on the Autronic SM4 connector pinout page, which covers the SM4, SM4DC and SM4 Marine versions with the standard SM4 loom (manufacturer documentation; diagram redrawn by Tuning Wiki). On dual-calibration versions pin 39 selects calibration instead of HSI 3. Use the original connector drawing for orientation and output limits, and identify the exact unit, part and version before wiring.SM4MR connector positionsManufacturer function table, Autronic product data. Use the original connector drawing for orientation and output limitations. On dual-calibration versions pin 39 selects calibration rather than HSI3. Outputs may have shared alternate functions.PinFunction1Ignition switch input2Injector 8 / switch 33Injector 7 / switch 24Injector 55Ignition 16Ignition 27Output 18Analogue 19Coolant temperature10HSI 111+8 V trigger supply12Output 8 / tacho13Output 614PWM 215+12 V main supply16Injector 417Injector 118Injector 6 / switch 119Ignition 320Output 321Throttle position22Signal ground23Air temperature24HSI 225Cylinder +26Sync +27Output 528PWM 129Power ground30+12 V RAM supply31Injector 332Injector 233Ignition 434Output 235Output 436+5 V sensor supply37Oxygen input38Analogue 239HSI 3 / dual-calibration select40Cylinder -41Sync -42Output 7Wiring and pinoutConsult the Autronic SM4MR wiring and documentation source and identify the exact connector face, part and version. Do not apply wiring from a similarly named model. If an exact drawing is unavailable for the unit at hand, obtain it from the manufacturer or supplier before making connections.

Further information

Autronic SM4MR model informationAutronic manufacturer indexSourcesAutronic SM4MR product page. Manufacturer. Accessed 19 November 2026.Autronic SM4MR model informationWiring, manuals or technical archiveAutronic manufacturer index

Rendered revisions

Open each version to inspect formatting, tables and photographs.

Revision 1: Autronic SM4MR

Autronic SM4MR is a standalone or earlier programmable engine-management system. Marine SM4 with sealed anodised case; the manufacturer lists eight injector outputs and four ignition outputs. Model-specific information.

Identification and features

Record the ECU label, model, part number, hardware revision, firmware, configured injectors, ignition hardware and loom before comparing systems. Some outputs can be reassigned; hardware, software, current limits and engine-specific options determine what is actually available.

SM4MR connector positions

Manufacturer function table, Autronic product data. Use the original connector drawing for orientation and output limitations. On dual-calibration versions pin 39 selects calibration rather than HSI3. Outputs may have shared alternate functions.

PinFunction
1Ignition switch input
2Injector 8 / switch 3
3Injector 7 / switch 2
4Injector 5
5Ignition 1
6Ignition 2
7Output 1
8Analogue 1
9Coolant temperature
10HSI 1
11+8 V trigger supply
12Output 8 / tacho
13Output 6
14PWM 2
15+12 V main supply
16Injector 4
17Injector 1
18Injector 6 / switch 1
19Ignition 3
20Output 3
21Throttle position
22Signal ground
23Air temperature
24HSI 2
25Cylinder +
26Sync +
27Output 5
28PWM 1
29Power ground
30+12 V RAM supply
31Injector 3
32Injector 2
33Ignition 4
34Output 2
35Output 4
36+5 V sensor supply
37Oxygen input
38Analogue 2
39HSI 3 / dual-calibration select
40Cylinder -
41Sync -
42Output 7

Wiring and pinout

Consult the Autronic SM4MR wiring and documentation source and identify the exact connector face, part and version. Do not apply wiring from a similarly named model. If an exact drawing is unavailable for the unit at hand, obtain it from the manufacturer or supplier before making connections.

Further information

Revision 2: Autronic SM4MR

Autronic SM4MR is a standalone or earlier programmable engine-management system. Marine SM4 with sealed anodised case; the manufacturer lists eight injector outputs and four ignition outputs. Model-specific information.

Identification and features

Record the ECU label, model, part number, hardware revision, firmware, configured injectors, ignition hardware and loom before comparing systems. Some outputs can be reassigned; hardware, software, current limits and engine-specific options determine what is actually available.

Processor

Autronic's SM4MR product page (manufacturer documentation) gives a 16-bit Intel microcontroller running at 20 MHz. The exact part number is not stated in the sources checked.

Engine applications

The SM4MR is the marinised version of the SM4, originally developed for international personal watercraft racing and suited to off-road racing and other high-performance motorsport. Per Autronic it supports most reciprocating engines of 1 to 8, 10, 12, 14 and 16 cylinders (two-stroke, four-stroke and rotary) and two-rotor rotary engines, with turbo boost control. Injector drivers are arranged as two groups of four with selectable peak/hold current; unused injector outputs can be reassigned as additional outputs or switch inputs. Ignition has four push-pull outputs with 3D-mappable dwell or pulse time. Main connector: 42-way sealed; serial: 8 mm 3-way sealed. Manned-aircraft use is prohibited. No engine codes are listed.

Connector pinout

The 42-position function table is on the Autronic SM4 connector pinout page, which covers the SM4, SM4DC and SM4 Marine versions with the standard SM4 loom (manufacturer documentation; diagram redrawn by Tuning Wiki). On dual-calibration versions pin 39 selects calibration instead of HSI 3. Use the original connector drawing for orientation and output limits, and identify the exact unit, part and version before wiring.

Further information

Sources