Electromotive TEC3r is a model in the Total Engine Control family. A later TEC3r model; its dedicated manual covers wiring, direct-fire units, coil firing and sequential fuel configurations. Manufacturer source.
Identification and software
Identify the exact model, serial, firmware and ignition-driver configuration before using a calibration or connecting a loom. WinTEC versions and hardware vary; the Electromotive manual archive separates the generations.
Wiring and pinout
Consult the model-specific manufacturer source and technical archive for the matching connector, firing order, ECU earths, injector drivers and ignition connections. Do not transfer TECgt200 or TECs200 positions to earlier TEC units. Where a complete exact-model pinout has not been verified, use the manufacturer documentation and verify the actual part number.
Availability
As of 17 November 2026, the manufacturer states it is not selling or repairing products. Electromotive notice. See the Electromotive family reference.
Hardware specification
Electromotive lists eight peak-and-hold injector drivers, sequential injection up to eight cylinders, staged injection with up to 16 injectors, and six high-current inductive coil drivers. The manufacturer page’s feature list mentions CAN output, while its specification table says CAN support is absent; verify the exact hardware and interface rather than assuming CAN capability. TEC3r product specification.