Electromotive TECs200 is a model in the Total Engine Control family. The manufacturer describes the TECs200 as a compact 200-series controller for supported one-, two- and four-cylinder applications. Manufacturer source.
Identification and software
Identify the exact model, serial, firmware and ignition-driver configuration before using a calibration or connecting a loom. WinTEC versions and hardware vary; the Electromotive manual archive separates the generations.
Wiring and pinout
Consult the model-specific manufacturer source and technical archive for the matching connector, firing order, ECU earths, injector drivers and ignition connections. Do not transfer TECgt200 or TECs200 positions to earlier TEC units. Where a complete exact-model pinout has not been verified, use the manufacturer documentation and verify the actual part number.
Availability
As of 17 November 2026, the manufacturer states it is not selling or repairing products. Electromotive notice. See the Electromotive family reference.
TECs200 connector pinout
Assigned positions from TECs200 manual v0.1, appendix IV pages 126–127. Unlisted positions are omitted and must not be treated as spare. For position 37, consult the original USB diagram directly. Verify the physical connector view and exact loom and hardware before connection; assignments are specific to TECs200.
| Pin | Manufacturer function |
|---|---|
| 1 | Coil shield A |
| 2 | Coil A1 |
| 3 | Coil B1 |
| 4 | Coil C1 |
| 5 | Driver-on-coil A1 |
| 6 | Driver-on-coil B1 |
| 7 | Driver-on-coil C1 |
| 8 | Ground |
| 9 | Knock |
| 13 | Coil shield B |
| 17 | Ground |
| 18 | Ground |
| 19 | 5 V reference |
| 20 | 5 V reference |
| 21 | 5 V reference |
| 22 | GPI 2 |
| 23 | GPI 3 |
| 24 | GPI 4 |
| 25 | GPI 5 |
| 26 | GPI 6 |
| 27 | GPI 7 |
| 28 | GPI 8 |
| 29 | GPI 9 |
| 30 | Ground |
| 31 | RXD |
| 32 | TXD |
| 33 | 12 V input |
| 34 | Speed input |
| 35 | USB ground |
| 36 | USB PC 5 V |
| 38 | USB D+ |
| 39 | Cam input |
| 40 | Cam 2 |
| 41 | Ground |
| 42 | Crank sensor input |
| 43 | Ground / shield |
| 44 | MAP |
| 45 | TPS |
| 46 | Coolant temperature |
| 47 | Manifold air temperature |
| 48 | EG RTD |
| 49 | Standard EGO |
| 50 | Wideband EGO |
| 51 | CAN high |
| 52 | CAN low |
| 53 | 12 V input |
| 56 | Datalog status |
| 57 | Fuel pump relay |
| 58 | GPO 1 |
| 59 | CE |
| 60 | IAC B / GPO 4 |
| 61 | IAC A / GPO 3 |
| 62 | Tachometer |
| 63 | GPO 9 |
| 64 | GPO 8 |
| 65 | IAC D / GPO 6 |
| 66 | IAC C / GPO 5 |
| 67 | Injector 1 |
| 68 | Injector 2 |
| 69 | Injector 3 |
| 70 | Injector 4 |
| 73 | Main ground |