Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
FuelTech standalone ECUs
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None
FuelTech FT550LITE ECU
FuelTech FT550LITE. Image: manufacturer product page; permission to republish confirmed by the user.

FuelTech FT550LITE is a PowerFT engine-management unit. FT550-family ECU with 14 inputs and 24 outputs but no LCD touchscreen; FuelTech identifies electronic-throttle capability and an external wideband conditioner requirement. FuelTech model documentation · FuelTech range comparison.

Identification and software

Record the exact model, serial, harness, firmware and configured outputs; similarly named FT models may use different connectors and functions. Tuning software: FTManager. FuelTech software and compatibility.

Wiring and pinout

Use the model-specific manual and the current FuelTech manuals index for connector view, cavity numbering, fuse values, sensor grounds and injector-driver limits. The manufacturer wiring archive contains installation-specific examples; match the exact ECU and harness before wiring. Pin functions depend on the model, hardware and configured output.

See FuelTech engine-management family for other models and company background. FuelTech is based in Brazil and has a US operation in Georgia. Sources reviewed 17 November 2026.

FT550 / FT550LITE connector assignments

From FuelTech PowerFT installation manual, sections 4.1 and 4.2. The source numbers the positions on the connector back, where terminals are inserted; check the original diagram, fuse and current requirements. Configurable blue and gray outputs are typical injector and ignition channels, not fixed assignments. Gray outputs need the manufacturer-specified external driver when used for injection; the FT450 has model-specific restrictions.

Connector A — 26-way

PinFunction
1Blue output 1
2Blue output 2
3Blue output 3
4Blue output 4
5Blue output 5
6Blue output 6
7Power ground
8Gray output 1
9Gray output 2
10Gray output 3
11Gray output 4
12Battery negative
1312 V from relay
145 V sensor supply
15CAN A low
16CAN A high
17Cam sync input
18Magnetic RPM sensor reference
19RPM signal input
20Sensor input 1
21Sensor input 2
22Sensor input 3
23Sensor input 4
24Sensor input 5
25Sensor input 6
26Sensor input 7

Connector B — 26-way

PinFunction
1Power ground
2Power ground
3CAN B low
4CAN B high
5Sensor input 8
6Sensor input 9
7Sensor input 10
8Blue output 7
9Blue output 8
10Gray output 5
11Gray output 6
12Sensor input 11
13Sensor input 12
14Blue output 9
15Blue output 10
16Gray output 7
17Gray output 8
18Sensor input 13 / strain gauge +
19Sensor input 14 / strain gauge −
20Blue output 11
21Blue output 12
22Yellow output 1
23Yellow output 2
24Yellow output 3
25Yellow output 4
26Sensor ground