Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
FuelTech standalone ECUs
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

Changes from revision 3 to revision 5

Removed text is struck through; added text is highlighted.

FuelTech FT550. Image: manufacturer product page; permission to republish confirmed by the user.

FuelTech FT550 is a PowerFT engine-management unit. PowerFT ECU with 14 configurable inputs, 24 outputs, an integrated accelerometer and gear-control functions; the touchscreen model is distinct from the screenless LITE. FuelTech model documentation · FuelTech range comparison.

Identification and software

Record the exact model, serial, harness, firmware and configured outputs; similarly named FT models may use different connectors and functions. Tuning software: FTManager. FuelTech software and compatibility.

Wiring and pinout

Use the model-specific manual and the current FuelTech manuals index for connector view, cavity numbering, fuse values, sensor grounds and injector-driver limits. The manufacturer wiring archive contains installation-specific examples; match the exact ECU and harness before wiring. Pin functions depend on the model, hardware and configured output.

See FuelTech engine-management family for other models and company background. FuelTech is based in Brazil and has a US operation in Georgia. Sources reviewed 17 November 2026.

FT550 / FT550LITE connector assignments

From FuelTech PowerFT installation manual, sections 4.1 and 4.2. The source numbers the positions on the connector back, where terminals are inserted; check the original diagram, fuse and current requirements. Configurable blue and gray outputs are typical injector and ignition channels, not fixed assignments. Gray outputs need the manufacturer-specified external driver when used for injection; the FT450 has model-specific restrictions.

Connector A — 26-way

PinFunction1Blue output 12Blue output 23Blue output 34Blue output 45Blue output 56Blue output 67Power ground8Gray output 19Gray output 210Gray output 311Gray output 412Battery negative1312 V from relay145 V sensor supply15CAN A low16CAN A high17Cam sync input18Magnetic RPM sensor reference19RPM signal input20Sensor input 121Sensor input 222Sensor input 323Sensor input 424Sensor input 525Sensor input 626Sensor input 7

Connector B — 26-way

PinFunction1Power ground2Power ground3CAN B low4CAN B high5Sensor input 86Sensor input 97Sensor input 108Blue output 79Blue output 810Gray output 511Gray output 612Sensor input 1113Sensor input 1214Blue output 915Blue output 1016Gray output 717Gray output 818Sensor input 13 / strain gauge +19Sensor input 14 / strain gauge −20Blue output 1121Blue output 1222Yellow output 123Yellow output 224Yellow output 325Yellow output 426Sensor ground

Structured pinoutA structured pin index and redrawn connector diagrams for the FT450, FT550, FT550LITE and FT600 are in FuelTech FT450, FT550 and FT600 connector pinout.Not establishedThe microcontroller used in the PowerFT ECUs is not named in FuelTech's published documentation.

Rendered revisions

Open each version to inspect formatting, tables and photographs.

Revision 3: FuelTech FT550
FuelTech FT550 ECU
FuelTech FT550. Image: manufacturer product page; permission to republish confirmed by the user.

FuelTech FT550 is a PowerFT engine-management unit. PowerFT ECU with 14 configurable inputs, 24 outputs, an integrated accelerometer and gear-control functions; the touchscreen model is distinct from the screenless LITE. FuelTech model documentation · FuelTech range comparison.

Identification and software

Record the exact model, serial, harness, firmware and configured outputs; similarly named FT models may use different connectors and functions. Tuning software: FTManager. FuelTech software and compatibility.

Wiring and pinout

Use the model-specific manual and the current FuelTech manuals index for connector view, cavity numbering, fuse values, sensor grounds and injector-driver limits. The manufacturer wiring archive contains installation-specific examples; match the exact ECU and harness before wiring. Pin functions depend on the model, hardware and configured output.

See FuelTech engine-management family for other models and company background. FuelTech is based in Brazil and has a US operation in Georgia. Sources reviewed 17 November 2026.

FT550 / FT550LITE connector assignments

From FuelTech PowerFT installation manual, sections 4.1 and 4.2. The source numbers the positions on the connector back, where terminals are inserted; check the original diagram, fuse and current requirements. Configurable blue and gray outputs are typical injector and ignition channels, not fixed assignments. Gray outputs need the manufacturer-specified external driver when used for injection; the FT450 has model-specific restrictions.

Connector A — 26-way

PinFunction
1Blue output 1
2Blue output 2
3Blue output 3
4Blue output 4
5Blue output 5
6Blue output 6
7Power ground
8Gray output 1
9Gray output 2
10Gray output 3
11Gray output 4
12Battery negative
1312 V from relay
145 V sensor supply
15CAN A low
16CAN A high
17Cam sync input
18Magnetic RPM sensor reference
19RPM signal input
20Sensor input 1
21Sensor input 2
22Sensor input 3
23Sensor input 4
24Sensor input 5
25Sensor input 6
26Sensor input 7

Connector B — 26-way

PinFunction
1Power ground
2Power ground
3CAN B low
4CAN B high
5Sensor input 8
6Sensor input 9
7Sensor input 10
8Blue output 7
9Blue output 8
10Gray output 5
11Gray output 6
12Sensor input 11
13Sensor input 12
14Blue output 9
15Blue output 10
16Gray output 7
17Gray output 8
18Sensor input 13 / strain gauge +
19Sensor input 14 / strain gauge −
20Blue output 11
21Blue output 12
22Yellow output 1
23Yellow output 2
24Yellow output 3
25Yellow output 4
26Sensor ground
Revision 5: FuelTech FT550
FuelTech FT550 ECU
FuelTech FT550. Image: manufacturer product page; permission to republish confirmed by the user.

FuelTech FT550 is a PowerFT engine-management unit. PowerFT ECU with 14 configurable inputs, 24 outputs, an integrated accelerometer and gear-control functions; the touchscreen model is distinct from the screenless LITE. FuelTech model documentation · FuelTech range comparison.

Identification and software

Record the exact model, serial, harness, firmware and configured outputs; similarly named FT models may use different connectors and functions. Tuning software: FTManager. FuelTech software and compatibility.

Wiring and pinout

Use the model-specific manual and the current FuelTech manuals index for connector view, cavity numbering, fuse values, sensor grounds and injector-driver limits. The manufacturer wiring archive contains installation-specific examples; match the exact ECU and harness before wiring. Pin functions depend on the model, hardware and configured output.

See FuelTech engine-management family for other models and company background. FuelTech is based in Brazil and has a US operation in Georgia. Sources reviewed 17 November 2026.

FT550 / FT550LITE connector assignments

From FuelTech PowerFT installation manual, sections 4.1 and 4.2. The source numbers the positions on the connector back, where terminals are inserted; check the original diagram, fuse and current requirements. Configurable blue and gray outputs are typical injector and ignition channels, not fixed assignments. Gray outputs need the manufacturer-specified external driver when used for injection; the FT450 has model-specific restrictions.

Connector A — 26-way

PinFunction
1Blue output 1
2Blue output 2
3Blue output 3
4Blue output 4
5Blue output 5
6Blue output 6
7Power ground
8Gray output 1
9Gray output 2
10Gray output 3
11Gray output 4
12Battery negative
1312 V from relay
145 V sensor supply
15CAN A low
16CAN A high
17Cam sync input
18Magnetic RPM sensor reference
19RPM signal input
20Sensor input 1
21Sensor input 2
22Sensor input 3
23Sensor input 4
24Sensor input 5
25Sensor input 6
26Sensor input 7

Connector B — 26-way

PinFunction
1Power ground
2Power ground
3CAN B low
4CAN B high
5Sensor input 8
6Sensor input 9
7Sensor input 10
8Blue output 7
9Blue output 8
10Gray output 5
11Gray output 6
12Sensor input 11
13Sensor input 12
14Blue output 9
15Blue output 10
16Gray output 7
17Gray output 8
18Sensor input 13 / strain gauge +
19Sensor input 14 / strain gauge −
20Blue output 11
21Blue output 12
22Yellow output 1
23Yellow output 2
24Yellow output 3
25Yellow output 4
26Sensor ground

Structured pinout

A structured pin index and redrawn connector diagrams for the FT450, FT550, FT550LITE and FT600 are in FuelTech FT450, FT550 and FT600 connector pinout.

Not established

The microcontroller used in the PowerFT ECUs is not named in FuelTech's published documentation.