Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
FAST standalone engine management
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

Original FAST XFI user-tunable fuel and ignition ECU, preceding the XFI 2.0 software upgrade.

Identification and functions

The original XFI installation manual documents the main harness, crank/cam interfaces and ECU connector charts. It identifies A3 and A4 as inductive cam and crank positive inputs and A7/A8 as discrete cam/crank inputs; confirm returns, shield, terminal orientation and the exact harness in the source. FAST states that original XFI units may be eligible for a version 2.0 firmware upgrade; verify serial and configuration before proceeding.

Wiring and support

Identify ECU part number, software version, harness and engine before connecting inputs or outputs. Exact pin functions depend on the specific unit, harness and optional drivers. FAST's software and documentation index separates its families. A missing pinout is not evidence that a related system uses the same connector.

See the FAST manufacturer index. Sources reviewed 17 November 2026.