Page organisation in this revision
- Page type
- Reference hub
- Subject
- Engine ECU
- Parent
- FAST standalone engine management
- Applies to
- No ECU-specific applicability
- Tool groups
- None
- Manufacturers
- None
Changes from revision 1 to revision 2
Removed text is struck through; added text is highlighted.
Earlier FAST Classic engine-management family, documented with a 60-pin harness, preceding XFI.
Identification and functions
FAST's manufacturer FAQ distinguishes the Classic's 60-pin harness from the 104-pin XFI 2.0 harness and states that features and options differ. The FAST Classic-to-XFI adapter drawing documents a harness conversion, not proof that Classic and XFI ECU pins are interchangeable. Verify ECU part number, configuration and corresponding Classic wiring diagram.
Wiring and support
Identify ECU part number, software version, harness and engine before connecting inputs or outputs. Exact pin functions depend on the specific unit, harness and optional drivers. FAST's software and documentation index separates its families. A missing pinout is not evidence that a related system uses the same connector.
See the FAST manufacturer index. Sources reviewed 17 November 2026.
Classic harness to XFI conversion reference — partialThe FAST XFI installation manual, PDF page 193, includes the manufacturer’s “Adapting Classic Harness for Use with XFI” drawing, revision B dated 12 April 2007. It labels the Classic computer pin and original harness connector location alongside the equivalent XFI connector. The table below transcribes the locations actually identified in that conversion drawing; it is not a complete Classic pinout, and an absent position must not be assumed unused. It applies to the depicted harness and options, not every Classic build.The source marks H1 for both discrete cam and knock and K3 for both ignition-output alternatives; determine the actual application and harness before making connections. The XFI column identifies the destination when carrying out the specific manufacturer-described conversion; it does not indicate a common physical connector between systems.Classic positionFunction in conversion drawingXFI destinationA1MAP signalC20A3Inductive crank signalA4B1TPS signalC21B3Inductive crank returnA2C1Coolant temperature signalC23C3Inductive cam signalA3D1Air temperature signalC22D3Inductive cam returnA1E15 V referenceC24E2Analogue sensor returnC11F1Wideband oxygen UEGOR−C5F2Wideband oxygen UEGOR+C4F3Wideband oxygen UEGOP+C1G1Wideband oxygen UEGOH−C6G2Wideband oxygen UEGOS+C3G3Wideband oxygen UEGOP−C2H1Discrete cam signal or knock input; diagram shows both with an asteriskA7 or A9J2Ignition pickup returnA13J3Discrete crank signalA8K2Ignition bypass outputA15K3TFI/EDIS or EST output; diagram shows both with a double asteriskA10 or A14L2Power adder enableB19L3Switched ignition inputB17M1Battery voltage inputB18M2Analogue returnB24M3Digital returnB8N1RS-232 transmitC27N2RS-232 receiveC28N3RS-232 returnC29P1Idle air control A lowB13P2Idle air control A highB12R1Idle air control B lowB15R2Idle air control B highB14R3Fan outputB10S1Injector HD16S2Injector DD9S3Fuel pump outputB5T1Injector GD14T2Injector CD7T3Power adder output 1B20W1Injector FD13W2Injector BD4W3Power adder output 2B21X1Injector ED11X2Injector AD2X3Points ignition outputA11Y1Main power returnA12Y2Main power returnB7Y3Main power returnD1
Rendered revisions
Open each version to inspect formatting, tables and photographs.
Revision 1: FAST Classic EFI
Earlier FAST Classic engine-management family, documented with a 60-pin harness, preceding XFI.
Identification and functions
FAST's manufacturer FAQ distinguishes the Classic's 60-pin harness from the 104-pin XFI 2.0 harness and states that features and options differ. The FAST Classic-to-XFI adapter drawing documents a harness conversion, not proof that Classic and XFI ECU pins are interchangeable. Verify ECU part number, configuration and corresponding Classic wiring diagram.
Wiring and support
Identify ECU part number, software version, harness and engine before connecting inputs or outputs. Exact pin functions depend on the specific unit, harness and optional drivers. FAST's software and documentation index separates its families. A missing pinout is not evidence that a related system uses the same connector.
See the FAST manufacturer index. Sources reviewed 17 November 2026.
Revision 2: FAST Classic EFI
Earlier FAST Classic engine-management family, documented with a 60-pin harness, preceding XFI.
Identification and functions
FAST's manufacturer FAQ distinguishes the Classic's 60-pin harness from the 104-pin XFI 2.0 harness and states that features and options differ. The FAST Classic-to-XFI adapter drawing documents a harness conversion, not proof that Classic and XFI ECU pins are interchangeable. Verify ECU part number, configuration and corresponding Classic wiring diagram.
Wiring and support
Identify ECU part number, software version, harness and engine before connecting inputs or outputs. Exact pin functions depend on the specific unit, harness and optional drivers. FAST's software and documentation index separates its families. A missing pinout is not evidence that a related system uses the same connector.
See the FAST manufacturer index. Sources reviewed 17 November 2026.
Classic harness to XFI conversion reference — partial
The FAST XFI installation manual, PDF page 193, includes the manufacturer’s “Adapting Classic Harness for Use with XFI” drawing, revision B dated 12 April 2007. It labels the Classic computer pin and original harness connector location alongside the equivalent XFI connector. The table below transcribes the locations actually identified in that conversion drawing; it is not a complete Classic pinout, and an absent position must not be assumed unused. It applies to the depicted harness and options, not every Classic build.
The source marks H1 for both discrete cam and knock and K3 for both ignition-output alternatives; determine the actual application and harness before making connections. The XFI column identifies the destination when carrying out the specific manufacturer-described conversion; it does not indicate a common physical connector between systems.
| Classic position | Function in conversion drawing | XFI destination |
|---|
| A1 | MAP signal | C20 |
| A3 | Inductive crank signal | A4 |
| B1 | TPS signal | C21 |
| B3 | Inductive crank return | A2 |
| C1 | Coolant temperature signal | C23 |
| C3 | Inductive cam signal | A3 |
| D1 | Air temperature signal | C22 |
| D3 | Inductive cam return | A1 |
| E1 | 5 V reference | C24 |
| E2 | Analogue sensor return | C11 |
| F1 | Wideband oxygen UEGOR− | C5 |
| F2 | Wideband oxygen UEGOR+ | C4 |
| F3 | Wideband oxygen UEGOP+ | C1 |
| G1 | Wideband oxygen UEGOH− | C6 |
| G2 | Wideband oxygen UEGOS+ | C3 |
| G3 | Wideband oxygen UEGOP− | C2 |
| H1 | Discrete cam signal or knock input; diagram shows both with an asterisk | A7 or A9 |
| J2 | Ignition pickup return | A13 |
| J3 | Discrete crank signal | A8 |
| K2 | Ignition bypass output | A15 |
| K3 | TFI/EDIS or EST output; diagram shows both with a double asterisk | A10 or A14 |
| L2 | Power adder enable | B19 |
| L3 | Switched ignition input | B17 |
| M1 | Battery voltage input | B18 |
| M2 | Analogue return | B24 |
| M3 | Digital return | B8 |
| N1 | RS-232 transmit | C27 |
| N2 | RS-232 receive | C28 |
| N3 | RS-232 return | C29 |
| P1 | Idle air control A low | B13 |
| P2 | Idle air control A high | B12 |
| R1 | Idle air control B low | B15 |
| R2 | Idle air control B high | B14 |
| R3 | Fan output | B10 |
| S1 | Injector H | D16 |
| S2 | Injector D | D9 |
| S3 | Fuel pump output | B5 |
| T1 | Injector G | D14 |
| T2 | Injector C | D7 |
| T3 | Power adder output 1 | B20 |
| W1 | Injector F | D13 |
| W2 | Injector B | D4 |
| W3 | Power adder output 2 | B21 |
| X1 | Injector E | D11 |
| X2 | Injector A | D2 |
| X3 | Points ignition output | A11 |
| Y1 | Main power return | A12 |
| Y2 | Main power return | B7 |
| Y3 | Main power return | D1 |