Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
MegaSquirt and MS3Pro standalone ECUs
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None
MS3Pro EVO Plus HC ECU
MS3Pro EVO Plus HC. Image: manufacturer product page; permission to republish confirmed by the user.

MS3Pro EVO Plus HC is a MegaSquirt-family engine-management product. The high-current version of EVO+ is identified separately by AMP EFI; DIYAutoTune lists up to 12 high-impedance injector outputs and eight high-current spark outputs. Other supplier package pages differ in spark count, so verify the actual unit and revision. Model source.

Identification and software

Record the ECU label, processor generation, board revision, firmware and installed hardware modifications. Calibration software and firmware must match the hardware. DIYAutoTune software and firmware · Model-specific information.

Wiring and pinout

Use the matching model document and wiring or support reference; the manufacturer manual index distinguishes wire-in and vehicle-specific variants. Check connector orientation, wiring changes, fuse ratings and output configuration before connecting loads; matching cases or software families do not establish identical pin functions.

See the MegaSquirt and MS3Pro family guide. Sources reviewed 17 November 2026.