Removed text is struck through; added text is highlighted.
MoTeC M150 product image from the manufacturer datasheet; reproduced with permission.
MoTeC M150 is an M1-family programmable ECU, part 13150. The manufacturer identifies it for up to 12 cylinders and port injection. M1 hardware is paired with a software package; features, channels and licences depend on the loaded package and hardware revision. MoTeC M150 product information and product image.
Identification and inputs/outputs
FieldManufacturer comparisonInjection hardware12 port injector outputs; 6 low-side injector outputsIgnition12 low-side ignition outputsHalf-bridge outputs10Universal digital inputs12Analogue voltage / temperature inputs17 / 6CAN buses3Connector configurationfour plastic, 120 positions
Numbers describe hardware capacity; they do not establish simultaneous availability for a specific application. MoTeC’s M1 comparison distinguishes port, inductive direct and piezo direct drivers. Check the exact injector and package; an external driver is not interchangeable with an internal driver.
Wiring and pinout
Use the M150 connector pinout and datasheet on the manufacturer product page. Connector type, keying and positions vary across M1 models; do not copy pin functions from another ECU. Verify the hardware revision, package, output allocations, wiring orientation, electrical limits and power and earth provisions against the exact unit.
Manufacturer connector tablesThese tables reproduce the complete connector position and designation lists from the MoTeC M150 datasheet. Pin identifiers are kept as printed, including letter case. Check the original connector views, mating key, wire size, electrical ratings and hardware revision before connecting. Output functions depend on the ECU package and configuration; direct-injection models require their specified drivers and precautions.Connector A — 34 positionsPinDesignationFunctionA01AT5Analogue Temperature Input 5A02AT6Analogue Temperature Input 6A03AV15Analogue Voltage Input 15A04AV16Analogue Voltage Input 16A05AV17Analogue Voltage Input 17A06IGN_LS9Low Side Ignition 9A07IGN_LS10Low Side Ignition 10A08IGN_LS11Low Side Ignition 11A09IGN_LS12Low Side Ignition 12A10SEN_5V0_C1Sensor 5.0V CA11LA_NB1Lambda Narrow Input 1A12LA_NB2Lambda Narrow Input 2A13KNOCK3Knock Input 3A14KNOCK4Knock Input 4A15DIG2Digital Input 2A16DIG3Digital Input 3A17DIG4Digital Input 4A18SEN_5V0_C2Sensor 5.0V CA19SEN_5V0_B2Sensor 5.0V BA20LINLIN BusA21RS232_RXRS232 ReceiveA22RS232_TXRS232 TransmitA23DIG1Digital Input 1A24BAT_NEG3Battery NegativeA25BAT_NEG4Battery NegativeA26SEN_0V_C1Sensor 0V CA27SEN_0V_C2Sensor 0V CA28CAN3_HICAN Bus 3 HighA29CAN3_LOCAN Bus 3 LowA30CAN2_HICAN Bus 2 HighA31CAN2_LOCAN Bus 2 LowA32BAT_NEG5Battery NegativeA33SEN_0V_B1Sensor 0V BA34SEN_0V_A1Sensor 0V AConnector B — 26 positionsPinDesignationFunctionB01OUT_HB9Half Bridge Output 9B02OUT_HB10Half Bridge Output 10B03UDIG8Universal Digital Input 8B04UDIG9Universal Digital Input 9B05UDIG10Universal Digital Input 10B06UDIG11Universal Digital Input 11B07UDIG12Universal Digital Input 12B08INJ_LS5Low Side Injector 5B09INJ_LS3Low Side Injector 3B10AV9Analogue Voltage Input 9B11AV10Analogue Voltage Input 10B12AV11Analogue Voltage Input 11B13BAT_POSBattery PositiveB14INJ_LS6Low Side Injector 6B15INJ_LS4Low Side Injector 4B16AV12Analogue Voltage Input 12B17AV13Analogue Voltage Input 13B18AV14Analogue Voltage Input 14B19BAT_POSBattery PositiveB20OUT_HB7Half Bridge Output 7B21OUT_HB8Half Bridge Output 8B22INJ_PH9Peak Hold Injector 9B23INJ_PH10Peak Hold Injector 10B24INJ_PH11Peak Hold Injector 11B25INJ_PH12Peak Hold Injector 12B26SEN_5V0_ASensor 5.0V AConnector C — 34 positionsPinDesignationFunctionC01OUT_HB2Half Bridge Output 2C02SEN_5V0_ASensor 5.0V AC03IGN_LS1Low Side Ignition 1C04IGN_LS2Low Side Ignition 2C05IGN_LS3Low Side Ignition 3C06IGN_LS4Low Side Ignition 4C07IGN_LS5Low Side Ignition 5C08IGN_LS6Low Side Ignition 6C09SEN_5V0_BSensor 5.0V BC10BAT_NEG1Battery NegativeC11BAT_NEG2Battery NegativeC12IGN_LS7Low Side Ignition 7C13IGN_LS8Low Side Ignition 8C14AV1Analogue Voltage Input 1C15AV2Analogue Voltage Input 2C16AV3Analogue Voltage Input 3C17AV4Analogue Voltage Input 4C18OUT_HB1Half Bridge Output 1C19INJ_PH1Peak Hold Injector 1C20INJ_PH2Peak Hold Injector 2C21INJ_PH3Peak Hold Injector 3C22INJ_PH4Peak Hold Injector 4C23INJ_LS1Low Side Injector 1C24INJ_LS2Low Side Injector 2C25AV5Analogue Voltage Input 5C26BAT_POSBattery PositiveC27INJ_PH5Peak Hold Injector 5C28INJ_PH6Peak Hold Injector 6C29INJ_PH7Peak Hold Injector 7C30INJ_PH8Peak Hold Injector 8C31OUT_HB3Half Bridge Output 3C32OUT_HB4Half Bridge Output 4C33OUT_HB5Half Bridge Output 5C34OUT_HB6Half Bridge Output 6Connector D — 26 positionsPinDesignationFunctionD01UDIG1Universal Digital Input 1D02UDIG2Universal Digital Input 2D03AT1Analogue Temperature Input 1D04AT2Analogue Temperature Input 2D05AT3Analogue Temperature Input 3D06AT4Analogue Temperature Input 4D07KNOCK1Knock Input 1D08UDIG3Universal Digital Input 3D09UDIG4Universal Digital Input 4D10UDIG5Universal Digital Input 5D11UDIG6Universal Digital Input 6D12BAT_BAKBattery BackupD13KNOCK2Knock Input 2D14UDIG7Universal Digital Input 7D15SEN_0V_ASensor 0V AD16SEN_0V_BSensor 0V BD17CAN1_HICAN Bus 1 HighD18CAN1_LOCAN Bus 1 LowD19SEN_6V3Sensor 6.3VD20AV6Analogue Voltage Input 6D21AV7Analogue Voltage Input 7D22AV8Analogue Voltage Input 8D23ETH_TX+Ethernet Transmit+D24ETH_TX-Ethernet Transmit-D25ETH_RX+Ethernet Receive+D26ETH_RX-Ethernet Receive-
Software and context
M1 Tune configures supported packages, while M1 Build is used to develop packages. ECU and logging features depend on installed licences. MoTeC downloads; MoTeC model index.
Rendered revisions
Open each version to inspect formatting, tables and photographs.
Revision 1: MoTeC M150
MoTeC M150 is an M1-family programmable ECU, part 13150. The manufacturer identifies it for up to 12 cylinders and port injection. M1 hardware is paired with a software package; features, channels and licences depend on the loaded package and hardware revision. MoTeC M150 product information and product image.
Identification and inputs/outputs
Field
Manufacturer comparison
Injection hardware
12 port injector outputs; 6 low-side injector outputs
Ignition
12 low-side ignition outputs
Half-bridge outputs
10
Universal digital inputs
12
Analogue voltage / temperature inputs
17 / 6
CAN buses
3
Connector configuration
four plastic, 120 positions
Numbers describe hardware capacity; they do not establish simultaneous availability for a specific application. MoTeC’s M1 comparison distinguishes port, inductive direct and piezo direct drivers. Check the exact injector and package; an external driver is not interchangeable with an internal driver.
Wiring and pinout
Use the M150 connector pinout and datasheet on the manufacturer product page. Connector type, keying and positions vary across M1 models; do not copy pin functions from another ECU. Verify the hardware revision, package, output allocations, wiring orientation, electrical limits and power and earth provisions against the exact unit.
Software and context
M1 Tune configures supported packages, while M1 Build is used to develop packages. ECU and logging features depend on installed licences. MoTeC downloads; MoTeC model index.
Revision 3: MoTeC M150MoTeC M150 product image from the manufacturer datasheet; reproduced with permission.
MoTeC M150 is an M1-family programmable ECU, part 13150. The manufacturer identifies it for up to 12 cylinders and port injection. M1 hardware is paired with a software package; features, channels and licences depend on the loaded package and hardware revision. MoTeC M150 product information and product image.
Identification and inputs/outputs
Field
Manufacturer comparison
Injection hardware
12 port injector outputs; 6 low-side injector outputs
Ignition
12 low-side ignition outputs
Half-bridge outputs
10
Universal digital inputs
12
Analogue voltage / temperature inputs
17 / 6
CAN buses
3
Connector configuration
four plastic, 120 positions
Numbers describe hardware capacity; they do not establish simultaneous availability for a specific application. MoTeC’s M1 comparison distinguishes port, inductive direct and piezo direct drivers. Check the exact injector and package; an external driver is not interchangeable with an internal driver.
Wiring and pinout
Use the M150 connector pinout and datasheet on the manufacturer product page. Connector type, keying and positions vary across M1 models; do not copy pin functions from another ECU. Verify the hardware revision, package, output allocations, wiring orientation, electrical limits and power and earth provisions against the exact unit.
Manufacturer connector tables
These tables reproduce the complete connector position and designation lists from the MoTeC M150 datasheet. Pin identifiers are kept as printed, including letter case. Check the original connector views, mating key, wire size, electrical ratings and hardware revision before connecting. Output functions depend on the ECU package and configuration; direct-injection models require their specified drivers and precautions.
Connector A — 34 positions
Pin
Designation
Function
A01
AT5
Analogue Temperature Input 5
A02
AT6
Analogue Temperature Input 6
A03
AV15
Analogue Voltage Input 15
A04
AV16
Analogue Voltage Input 16
A05
AV17
Analogue Voltage Input 17
A06
IGN_LS9
Low Side Ignition 9
A07
IGN_LS10
Low Side Ignition 10
A08
IGN_LS11
Low Side Ignition 11
A09
IGN_LS12
Low Side Ignition 12
A10
SEN_5V0_C1
Sensor 5.0V C
A11
LA_NB1
Lambda Narrow Input 1
A12
LA_NB2
Lambda Narrow Input 2
A13
KNOCK3
Knock Input 3
A14
KNOCK4
Knock Input 4
A15
DIG2
Digital Input 2
A16
DIG3
Digital Input 3
A17
DIG4
Digital Input 4
A18
SEN_5V0_C2
Sensor 5.0V C
A19
SEN_5V0_B2
Sensor 5.0V B
A20
LIN
LIN Bus
A21
RS232_RX
RS232 Receive
A22
RS232_TX
RS232 Transmit
A23
DIG1
Digital Input 1
A24
BAT_NEG3
Battery Negative
A25
BAT_NEG4
Battery Negative
A26
SEN_0V_C1
Sensor 0V C
A27
SEN_0V_C2
Sensor 0V C
A28
CAN3_HI
CAN Bus 3 High
A29
CAN3_LO
CAN Bus 3 Low
A30
CAN2_HI
CAN Bus 2 High
A31
CAN2_LO
CAN Bus 2 Low
A32
BAT_NEG5
Battery Negative
A33
SEN_0V_B1
Sensor 0V B
A34
SEN_0V_A1
Sensor 0V A
Connector B — 26 positions
Pin
Designation
Function
B01
OUT_HB9
Half Bridge Output 9
B02
OUT_HB10
Half Bridge Output 10
B03
UDIG8
Universal Digital Input 8
B04
UDIG9
Universal Digital Input 9
B05
UDIG10
Universal Digital Input 10
B06
UDIG11
Universal Digital Input 11
B07
UDIG12
Universal Digital Input 12
B08
INJ_LS5
Low Side Injector 5
B09
INJ_LS3
Low Side Injector 3
B10
AV9
Analogue Voltage Input 9
B11
AV10
Analogue Voltage Input 10
B12
AV11
Analogue Voltage Input 11
B13
BAT_POS
Battery Positive
B14
INJ_LS6
Low Side Injector 6
B15
INJ_LS4
Low Side Injector 4
B16
AV12
Analogue Voltage Input 12
B17
AV13
Analogue Voltage Input 13
B18
AV14
Analogue Voltage Input 14
B19
BAT_POS
Battery Positive
B20
OUT_HB7
Half Bridge Output 7
B21
OUT_HB8
Half Bridge Output 8
B22
INJ_PH9
Peak Hold Injector 9
B23
INJ_PH10
Peak Hold Injector 10
B24
INJ_PH11
Peak Hold Injector 11
B25
INJ_PH12
Peak Hold Injector 12
B26
SEN_5V0_A
Sensor 5.0V A
Connector C — 34 positions
Pin
Designation
Function
C01
OUT_HB2
Half Bridge Output 2
C02
SEN_5V0_A
Sensor 5.0V A
C03
IGN_LS1
Low Side Ignition 1
C04
IGN_LS2
Low Side Ignition 2
C05
IGN_LS3
Low Side Ignition 3
C06
IGN_LS4
Low Side Ignition 4
C07
IGN_LS5
Low Side Ignition 5
C08
IGN_LS6
Low Side Ignition 6
C09
SEN_5V0_B
Sensor 5.0V B
C10
BAT_NEG1
Battery Negative
C11
BAT_NEG2
Battery Negative
C12
IGN_LS7
Low Side Ignition 7
C13
IGN_LS8
Low Side Ignition 8
C14
AV1
Analogue Voltage Input 1
C15
AV2
Analogue Voltage Input 2
C16
AV3
Analogue Voltage Input 3
C17
AV4
Analogue Voltage Input 4
C18
OUT_HB1
Half Bridge Output 1
C19
INJ_PH1
Peak Hold Injector 1
C20
INJ_PH2
Peak Hold Injector 2
C21
INJ_PH3
Peak Hold Injector 3
C22
INJ_PH4
Peak Hold Injector 4
C23
INJ_LS1
Low Side Injector 1
C24
INJ_LS2
Low Side Injector 2
C25
AV5
Analogue Voltage Input 5
C26
BAT_POS
Battery Positive
C27
INJ_PH5
Peak Hold Injector 5
C28
INJ_PH6
Peak Hold Injector 6
C29
INJ_PH7
Peak Hold Injector 7
C30
INJ_PH8
Peak Hold Injector 8
C31
OUT_HB3
Half Bridge Output 3
C32
OUT_HB4
Half Bridge Output 4
C33
OUT_HB5
Half Bridge Output 5
C34
OUT_HB6
Half Bridge Output 6
Connector D — 26 positions
Pin
Designation
Function
D01
UDIG1
Universal Digital Input 1
D02
UDIG2
Universal Digital Input 2
D03
AT1
Analogue Temperature Input 1
D04
AT2
Analogue Temperature Input 2
D05
AT3
Analogue Temperature Input 3
D06
AT4
Analogue Temperature Input 4
D07
KNOCK1
Knock Input 1
D08
UDIG3
Universal Digital Input 3
D09
UDIG4
Universal Digital Input 4
D10
UDIG5
Universal Digital Input 5
D11
UDIG6
Universal Digital Input 6
D12
BAT_BAK
Battery Backup
D13
KNOCK2
Knock Input 2
D14
UDIG7
Universal Digital Input 7
D15
SEN_0V_A
Sensor 0V A
D16
SEN_0V_B
Sensor 0V B
D17
CAN1_HI
CAN Bus 1 High
D18
CAN1_LO
CAN Bus 1 Low
D19
SEN_6V3
Sensor 6.3V
D20
AV6
Analogue Voltage Input 6
D21
AV7
Analogue Voltage Input 7
D22
AV8
Analogue Voltage Input 8
D23
ETH_TX+
Ethernet Transmit+
D24
ETH_TX-
Ethernet Transmit-
D25
ETH_RX+
Ethernet Receive+
D26
ETH_RX-
Ethernet Receive-
Software and context
M1 Tune configures supported packages, while M1 Build is used to develop packages. ECU and logging features depend on installed licences. MoTeC downloads; MoTeC model index.