Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
Electromotive standalone ECUs
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

Electromotive TEC-1 is a model in the Total Engine Control family. Early TEC engine-management system covered with TEC-II in Electromotive’s legacy installation and calibration manual. Manufacturer source.

Identification and software

Identify the exact model, serial, firmware and ignition-driver configuration before using a calibration or connecting a loom. WinTEC versions and hardware vary; the Electromotive manual archive separates the generations.

Wiring and pinout

Consult the model-specific manufacturer source and technical archive for the matching connector, firing order, ECU earths, injector drivers and ignition connections. Do not transfer TECgt200 or TECs200 positions to earlier TEC units. Where a complete exact-model pinout has not been verified, use the manufacturer documentation and verify the actual part number.

Availability

As of 17 November 2026, the manufacturer states it is not selling or repairing products. Electromotive notice. See the Electromotive family reference.