MS3Pro EVO Plus is a MegaSquirt-family engine-management product. The EVO+ uses three AMPSEAL connectors with 92 positions, an onboard 4-bar MAP sensor and barometric sensor; the supplier lists up to 12 high-impedance sequential injector outputs and up to 10 logic-level spark outputs. Model source.
Identification and software
Record the ECU label, processor generation, board revision, firmware and installed hardware modifications. Calibration software and firmware must match the hardware. DIYAutoTune software and firmware · Model-specific information.
Wiring and pinout
Use the matching model document and wiring or support reference; the manufacturer manual index distinguishes wire-in and vehicle-specific variants. Check connector orientation, wiring changes, fuse ratings and output configuration before connecting loads; matching cases or software families do not establish identical pin functions.
See the MegaSquirt and MS3Pro family guide. Sources reviewed 17 November 2026.