Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
Standalone ECUs
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

Changes from revision 1 to revision 3

Removed text is struck through; added text is highlighted.

Wolf Engine Management was based in Victoria, Australia, according to its V500 manufacturer specification. Wolf V500 specification, revision 2, 2006.

Documented product names include Wolf3D V4, V4X, V500 and V550. Universal systems and vehicle-specific kits need model- and harness-specific wiring references. AiM Wolf ECU communications reference; historic systems listed by an Australian tuning workshop.

Detailed model references appear below. Marketing product photographs are linked from the manufacturer sources, where available. Check exact part number, hardware and loom before using a pinout.

Individual model referencesEach page identifies available model-specific evidence and wiring sources. Coverage is not necessarily exhaustive; exact specifications, applications and pinouts remain unverified for some historic units.3D V4V4XV500V550

Rendered revisions

Open each version to inspect formatting, tables and photographs.

Revision 1: Wolf standalone ECUs

Wolf Engine Management was based in Victoria, Australia, according to its V500 manufacturer specification. Wolf V500 specification, revision 2, 2006.

Documented product names include Wolf3D V4, V4X, V500 and V550. Universal systems and vehicle-specific kits need model- and harness-specific wiring references. AiM Wolf ECU communications reference; historic systems listed by an Australian tuning workshop.

Detailed model references appear below. Marketing product photographs are linked from the manufacturer sources, where available. Check exact part number, hardware and loom before using a pinout.

Revision 3: Wolf standalone ECUs

Wolf Engine Management was based in Victoria, Australia, according to its V500 manufacturer specification. Wolf V500 specification, revision 2, 2006.

Documented product names include Wolf3D V4, V4X, V500 and V550. Universal systems and vehicle-specific kits need model- and harness-specific wiring references. AiM Wolf ECU communications reference; historic systems listed by an Australian tuning workshop.

Detailed model references appear below. Marketing product photographs are linked from the manufacturer sources, where available. Check exact part number, hardware and loom before using a pinout.

Individual model references

Each page identifies available model-specific evidence and wiring sources. Coverage is not necessarily exhaustive; exact specifications, applications and pinouts remain unverified for some historic units.