Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
AEM Performance Electronics standalone ECUs
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

AEM Infinity 708 (manufacturer part 30-7101) is a programmable Infinity engine-management ECU, a separately identified model in AEM's hardware comparison.

Identification and capability

Manufacturer specificationInfinity 708
Maximum cylinders, as listed8
Sequential injector outputs8 high- or low-impedance
Ignition8 logic-level
Connector positions129
Electronic throttleDual
CAN channels2
Internal wideband channels2

Compare injector impedance and ignition driver type before connecting components. Maximum cylinder count does not imply every feature or configuration is available simultaneously; verify exact part number, harness and calibration. AEM lists InfinityTuner software separately from Series 1/2 EMS software.

Connector and wiring

AEM's Infinity 708 family hardware and wiring reference gives electrical limits and connector diagrams. Match the ECU's number and physical harness, and verify connector orientation. The 506 and 508 share an 80-way shell but some pin assignments differ; Series 3 and Series 7 use different connectors and are not interchangeable by name.

Further documents

Sources reviewed 17 November 2026. Availability of an exact part or application should be checked separately.