AEM Infinity 508 (manufacturer part 30-7108 / 30-7112) is a programmable Infinity engine-management ECU, a separately identified model in AEM's hardware comparison.
Identification and capability
| Manufacturer specification | Infinity 508 |
|---|---|
| Maximum cylinders, as listed | 8 |
| Sequential injector outputs | 8 high-impedance |
| Ignition | 8 logic-level |
| Connector positions | 80 |
| Electronic throttle | Single |
| CAN channels | 2 |
| Internal wideband channels | 1 |
Compare injector impedance and ignition driver type before connecting components. Maximum cylinder count does not imply every feature or configuration is available simultaneously; verify exact part number, harness and calibration. AEM lists InfinityTuner software separately from Series 1/2 EMS software.
Connector and wiring
AEM's Infinity 508 family hardware and wiring reference gives electrical limits and connector diagrams. Match the ECU's number and physical harness, and verify connector orientation. The 506 and 508 share an 80-way shell but some pin assignments differ; Series 3 and Series 7 use different connectors and are not interchangeable by name.
Example connector differences
For the specific Nissan SR20DET PNP harness documented by AEM, C1-3 and C1-4 are injector outputs 7 and 8; C1-10 is permanent battery power and C1-11 through C1-14 are ignition coil signals 4, 3, 2, 1. The source says C1-10 must be powered before ignition is switched on and that the coil signals cannot drive a coil primary directly. These are ECU connector functions in the 30-3517 application-specific wiring guide, not a universal factory vehicle pinout.
Further documents
- Manufacturer wiring and hardware specifications
- AEM Infinity user manual and comparison
- AEM engine management support and application harnesses
- AEM manufacturer index
Sources reviewed 17 November 2026. Availability of an exact part or application should be checked separately.