AEM Infinity 358 (manufacturer part 30-7114) is a programmable Infinity engine-management ECU, a separately identified model in AEM's hardware comparison.
Identification and capability
| Manufacturer specification | Infinity 358 |
|---|---|
| Maximum cylinders, as listed | 8 |
| Sequential injector outputs | 8 high-impedance |
| Ignition | 8 direct coil-on-plug drivers and one distributor driver |
| Connector positions | 73 |
| Electronic throttle | No |
| CAN channels | 1 |
| Internal wideband channels | 0 |
Compare injector impedance and ignition driver type before connecting components. Maximum cylinder count does not imply every feature or configuration is available simultaneously; verify exact part number, harness and calibration. AEM lists InfinityTuner software separately from Series 1/2 EMS software.
Connector and wiring
AEM's Infinity 358 family hardware and wiring reference gives electrical limits and connector diagrams. Match the ECU's number and physical harness, and verify connector orientation. The 506 and 508 share an 80-way shell but some pin assignments differ; Series 3 and Series 7 use different connectors and are not interchangeable by name.
Further documents
- Manufacturer wiring and hardware specifications
- AEM Infinity user manual and comparison
- AEM engine management support and application harnesses
- AEM manufacturer index
Sources reviewed 17 November 2026. Availability of an exact part or application should be checked separately.