Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
Haltech standalone ECUs
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

Haltech IG5: IG5 is a historical programmable ignition controller, listed in Haltech's discontinued manual and software archives. The IG5 manual describes ignition outputs used to trigger an igniter; it does not establish a complete fuel-injection ECU. Manufacturer information.

Identification and connection

Record ECU model, serial, hardware revision, firmware and loom part number before choosing wiring. Select the IG5 manual in the manufacturer's archive. Its documented ignition signals require a suitable igniter, with output configuration matched to its type; the outputs must not be treated as direct coil drivers. Model-specific manual or diagram.

Software and related models

Use the manufacturer's model-appropriate software and documentation. Configuration and available outputs depend on exact hardware and the intended installation. See the manufacturer model index for related systems.