Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
Link standalone ECUs
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

Changes from revision 2 to revision 4

Removed text is struck through; added text is highlighted.

Manufacturer product image of JZX100X application ECU: Link ECU. Permission to republish confirmed by the user.

Link G4X JZX100X is a vehicle-specific programmable plug-in ECU for the Toyota JZX100 application listed in Link's model-specific manuals index. It is an application board rather than a universal wire-in ECU. Check the exact vehicle, market, engine, original ECU and board part number against the manufacturer's JZX100X installation manual.

Identification and installation

Record the Link model label and revision, donor factory ECU connector and car's engine and year. Plug-in boards connect to particular factory-harness layouts; the family or vehicle name alone does not establish every model-year or transmission combination. The manufacturer manual gives the supported application and any installation or configuration notes for this board.

G4X plug-in platforms offer configurable fuel and ignition control but available channels and features depend on the original header and board. The G4X plug-in general specifications are conditional on the particular application and do not mean every input is brought out to the factory harness.

Processor and hardwareLink's G4X plug-in specifications describe a 150 MHz "specialised engine management microprocessor" with 32-bit floating-point calculation, 12-bit ADC resolution, 4 Gb non-volatile flash, 512 MB of data logging and two CAN buses (vendor specification). The processor part number is not published by Link.Engine applicationLink's installation manual is written for the Toyota Mark II JZX100. The board drives six injectors and an inlet VVT solenoid (pins 11 and 12) and reads a VVT cam trigger on Trig 2 (pin 42), which matches the 1JZ-GTE VVT-i engine named for this ECU (part number 232-4000) in retailer listings (seen in search summary; not confirmed from Link's own page).

Pinout and tuning

The JZX100X installation manual is the model-specific source for board pinouts, expansion connections, electrical cautions and startup configuration. Use its connector orientation and the exact board version; do not copy a wire-in ECU pinout onto a factory harness. PCLink and manual downloads; Link manufacturer overview.

A structured, redrawn version of the schedules below, with the 100-pin main header face, is in Link G4X JZX100X connector pinout.Manufacturer connector schedulesFrom Link's JZX100X installation manual. Link describes the pinout view as looking into the ECU from the wire side. A dash reproduces an unspecified source field; nc is Link's label. Confirm the vehicle, market and board revision before use.The manufacturer labels main position 3 only “C88” without a cavity number; this is retained as published. Ignition 4–6 auxiliary channels are shared between the main and expansion headers. CAN 1 is not externally connected on this model; CAN 2 serves the vehicle temperature gauge and A/C system.Factory main headerFactory pinLink ECU channelFactory function1 (C88 10)Injector 1Injection63 (C85 5)nc—2 (C88 9)Injector 2Injection64 (C85 11)nc—3 (C88)Injector 3Injection65 (C85 10)Aux 11Fuel Pump4 (C88 7)Injector 4Injection66 (C85 9)nc—5 (C88 6)Injector 5Injection67 (C85 8)nc—6 (C88 5)Injector 6Injection68 (C85 16)nc—7 (C88 4)nc—69 (C85 15)nc—8 (C88 3)nc—70 (C85 14)Injector 7 (Aux)Air Bypass Valve (ABV)9 (C88 2)nc—71 (C85 13)Aux 2Purge10 (C88 1)nc—72 (C85 12)nc—11 (C88 16)+14V Out (VVT)VVT Solenoid - Inlet12 (C88 15)Aux 1VVT solenoid - Inlet73 (C86 8)nc—13 (C88 14)ncStarter Signal (Auto)74 (C86 7)nc—14 (C88 13)DI 9Starter Signal (Manual)75 (C86 6)nc—15 (C88 12)nc—76 (C86 5)Aux 3AC Clutch16 (C88 11)nc—77 (C86 4)nc—17 (C88 26)EVG+5V or Gnd (Jumper)78 (C86 3)nc—18 (C88 25)Ground—79 (C86 2)nc—19 (C88 24)Ignition 1Ignition80 (C86 1)nc—20 (C88 23)Aux 5ISC Stepper81 (C86 13)nc—21 (C88 22)Aux 7ISC Stepper82 (C86 12)DI 7Vehicle Speed (From Dash)22 (C88 21)Aux 6ISC Stepper83 (C86 11)nc—23 (C88 20)Aux 8ISC Stepper84 (C86 10)nc—24 (C88 19)nc—85 (C86 9)DI 5Ignition Switch25 (C88 18)nc—86 (C86 21)nc—26 (C88 17)nc—87 (C86 20)DI 6AC Request27 (C88 34)Ground—88 (C86 19)nc—28 (C88 33)Ground—89 (C86 18)nc—29 (C88 32)Ignition 4 (Aux)*Spare90 (C86 17)nc—30 (C88 31)nc—91 (C86 16)nc—31 (C88 30)Knock 1Knock92 (C86 15)nc—32 (C88 29)Knock 2Knock93 (C86 14)nc (+12V constant)—33 (C88 28)nc—94 (C86 28)nc—34 (C88 27)nc—95 (C86 27)nc—96 (C86 26)THWOControlled by CAN 235 (C84 6)Ground (NE-)—97 (C86 25)nc—36 (C84 5)Trig 1Trig 1 (NE+)98 (C86 24)nc—37 (C84 4)nc—99 (C86 23)nc (+14V Main Relay)—38 (C84 3)nc—100 (C86 22)+14V (Main Relay)ECU Power39 (C84 2)Ignition 6 (Aux)*Spare40 (C84 1)+5V Out—41 (C84 11)Ignition 5 (Aux)*Spare42 (C84 10)Trig 2Trig 2 (VVT)43 (C84 9)nc—44 (C84 8)An Volt 6MAF Signal45 (C84 7)An Volt 3TPS (Main)46 (C84 17)Ignition 2Ignition47 (C84 16)Ignition 3Ignition48 (C84 15)nc—49 (C84 14)nc—50 (C84 13)nc—51 (C84 12)nc—52 (C84 22)Ground—53 (C84 21)An Temp 3MAF IAT54 (C84 20)An Temp 1ECT55 (C84 19)nc—56 (C84 18)nc—57 (C85 4)Aux 14Fuel Pump Speed58 (C85 3)Ignition 8CE Light59 (C85 2)Aux 16 (Main Relay)ECU Hold Power60 (C85 1)nc—61 (C85 7)nc—62 (C85 6)nc—Expansion connectorPositionLink ECU channelFunctionExpansion 1Ground (Signal)—Expansion 2An Volt 4—Expansion 3An Temp 2—Expansion 4+5V Out—Expansion 5An Volt 5—Expansion 6DI 3—Expansion 7DI 4—Expansion 8Injector 8 (Aux)—Expansion 9An Temp 4—Expansion 10DI 1—Expansion 11DI 2—Expansion 12Ignition 4 (Aux)—Expansion 13Ignition 5 (Aux)—Expansion 14Ignition 6 (Aux)—Expansion 15An Volt 1—Expansion 16An Volt 2—Electronic-throttle connectorPositionLink ECU channelFunctionEthrottle 1Ground (Signal)—Ethrottle 2+5V Out—Ethrottle 3An Volt 10—Ethrottle 4An Volt 9—Ethrottle 5An Volt 8—Ethrottle 6An Volt 7—Ethrottle 7Aux 10—Ethrottle 8Aux 9—MAF sensor: JZS161 2JZGE before 07/2000 (Also JZS161 2JZGTE & JZA80 2JZGTE VVTi)The guide labels this as JZX100 MAF information but names these additional Toyota applications. Confirm the actual sensor configuration; the manufacturer warns that at least two five-wire arrangements exist.PinSymbolFunction1THAAir Temperature Sensor2E2Sensor Ground (Air Temperature Sensor)3EVGMass Airflow Sensor Ground4+BEFI Main Relay Switched Power5VGEngine AirflowMAF sensor: JZS161 2JZGE after 07/2000 (Also JZS171 1JZGTE)The guide labels this as JZX100 MAF information but names these additional Toyota applications. Confirm the actual sensor configuration; the manufacturer warns that at least two five-wire arrangements exist.PinSymbolFunction1+BEFI Main Relay Switched Power2EVGMass Airflow Sensor Ground3VGEngine Airflow4THAAir Temperature Sensor5E2Sensor Ground (Air Temperature Sensor)RS232 connectorPinFunctionWire colour1Comms GNDBrown2ncGreen3ncWhite4RS232-RXGrey5RS232-TXYellow

Rendered revisions

Open each version to inspect formatting, tables and photographs.

Revision 2: Link G4X JZX100X plug-in ECU
Link G4X JZX100X plug-in ECU
Manufacturer product image of JZX100X application ECU: Link ECU. Permission to republish confirmed by the user.

Link G4X JZX100X is a vehicle-specific programmable plug-in ECU for the Toyota JZX100 application listed in Link's model-specific manuals index. It is an application board rather than a universal wire-in ECU. Check the exact vehicle, market, engine, original ECU and board part number against the manufacturer's JZX100X installation manual.

Identification and installation

Record the Link model label and revision, donor factory ECU connector and car's engine and year. Plug-in boards connect to particular factory-harness layouts; the family or vehicle name alone does not establish every model-year or transmission combination. The manufacturer manual gives the supported application and any installation or configuration notes for this board.

G4X plug-in platforms offer configurable fuel and ignition control but available channels and features depend on the original header and board. The G4X plug-in general specifications are conditional on the particular application and do not mean every input is brought out to the factory harness.

Pinout and tuning

The JZX100X installation manual is the model-specific source for board pinouts, expansion connections, electrical cautions and startup configuration. Use its connector orientation and the exact board version; do not copy a wire-in ECU pinout onto a factory harness. PCLink and manual downloads; Link manufacturer overview.

Revision 4: Link G4X JZX100X plug-in ECU
Link G4X JZX100X plug-in ECU
Manufacturer product image of JZX100X application ECU: Link ECU. Permission to republish confirmed by the user.

Link G4X JZX100X is a vehicle-specific programmable plug-in ECU for the Toyota JZX100 application listed in Link's model-specific manuals index. It is an application board rather than a universal wire-in ECU. Check the exact vehicle, market, engine, original ECU and board part number against the manufacturer's JZX100X installation manual.

Identification and installation

Record the Link model label and revision, donor factory ECU connector and car's engine and year. Plug-in boards connect to particular factory-harness layouts; the family or vehicle name alone does not establish every model-year or transmission combination. The manufacturer manual gives the supported application and any installation or configuration notes for this board.

G4X plug-in platforms offer configurable fuel and ignition control but available channels and features depend on the original header and board. The G4X plug-in general specifications are conditional on the particular application and do not mean every input is brought out to the factory harness.

Processor and hardware

Link's G4X plug-in specifications describe a 150 MHz "specialised engine management microprocessor" with 32-bit floating-point calculation, 12-bit ADC resolution, 4 Gb non-volatile flash, 512 MB of data logging and two CAN buses (vendor specification). The processor part number is not published by Link.

Engine application

Link's installation manual is written for the Toyota Mark II JZX100. The board drives six injectors and an inlet VVT solenoid (pins 11 and 12) and reads a VVT cam trigger on Trig 2 (pin 42), which matches the 1JZ-GTE VVT-i engine named for this ECU (part number 232-4000) in retailer listings (seen in search summary; not confirmed from Link's own page).

Pinout and tuning

The JZX100X installation manual is the model-specific source for board pinouts, expansion connections, electrical cautions and startup configuration. Use its connector orientation and the exact board version; do not copy a wire-in ECU pinout onto a factory harness. PCLink and manual downloads; Link manufacturer overview.

A structured, redrawn version of the schedules below, with the 100-pin main header face, is in Link G4X JZX100X connector pinout.

Manufacturer connector schedules

From Link's JZX100X installation manual. Link describes the pinout view as looking into the ECU from the wire side. A dash reproduces an unspecified source field; nc is Link's label. Confirm the vehicle, market and board revision before use.

The manufacturer labels main position 3 only “C88” without a cavity number; this is retained as published. Ignition 4–6 auxiliary channels are shared between the main and expansion headers. CAN 1 is not externally connected on this model; CAN 2 serves the vehicle temperature gauge and A/C system.

Factory main header

Factory pinLink ECU channelFactory function
1 (C88 10)Injector 1Injection
63 (C85 5)nc—
2 (C88 9)Injector 2Injection
64 (C85 11)nc—
3 (C88)Injector 3Injection
65 (C85 10)Aux 11Fuel Pump
4 (C88 7)Injector 4Injection
66 (C85 9)nc—
5 (C88 6)Injector 5Injection
67 (C85 8)nc—
6 (C88 5)Injector 6Injection
68 (C85 16)nc—
7 (C88 4)nc—
69 (C85 15)nc—
8 (C88 3)nc—
70 (C85 14)Injector 7 (Aux)Air Bypass Valve (ABV)
9 (C88 2)nc—
71 (C85 13)Aux 2Purge
10 (C88 1)nc—
72 (C85 12)nc—
11 (C88 16)+14V Out (VVT)VVT Solenoid - Inlet
12 (C88 15)Aux 1VVT solenoid - Inlet
73 (C86 8)nc—
13 (C88 14)ncStarter Signal (Auto)
74 (C86 7)nc—
14 (C88 13)DI 9Starter Signal (Manual)
75 (C86 6)nc—
15 (C88 12)nc—
76 (C86 5)Aux 3AC Clutch
16 (C88 11)nc—
77 (C86 4)nc—
17 (C88 26)EVG+5V or Gnd (Jumper)
78 (C86 3)nc—
18 (C88 25)Ground—
79 (C86 2)nc—
19 (C88 24)Ignition 1Ignition
80 (C86 1)nc—
20 (C88 23)Aux 5ISC Stepper
81 (C86 13)nc—
21 (C88 22)Aux 7ISC Stepper
82 (C86 12)DI 7Vehicle Speed (From Dash)
22 (C88 21)Aux 6ISC Stepper
83 (C86 11)nc—
23 (C88 20)Aux 8ISC Stepper
84 (C86 10)nc—
24 (C88 19)nc—
85 (C86 9)DI 5Ignition Switch
25 (C88 18)nc—
86 (C86 21)nc—
26 (C88 17)nc—
87 (C86 20)DI 6AC Request
27 (C88 34)Ground—
88 (C86 19)nc—
28 (C88 33)Ground—
89 (C86 18)nc—
29 (C88 32)Ignition 4 (Aux)*Spare
90 (C86 17)nc—
30 (C88 31)nc—
91 (C86 16)nc—
31 (C88 30)Knock 1Knock
92 (C86 15)nc—
32 (C88 29)Knock 2Knock
93 (C86 14)nc (+12V constant)—
33 (C88 28)nc—
94 (C86 28)nc—
34 (C88 27)nc—
95 (C86 27)nc—
96 (C86 26)THWOControlled by CAN 2
35 (C84 6)Ground (NE-)—
97 (C86 25)nc—
36 (C84 5)Trig 1Trig 1 (NE+)
98 (C86 24)nc—
37 (C84 4)nc—
99 (C86 23)nc (+14V Main Relay)—
38 (C84 3)nc—
100 (C86 22)+14V (Main Relay)ECU Power
39 (C84 2)Ignition 6 (Aux)*Spare
40 (C84 1)+5V Out—
41 (C84 11)Ignition 5 (Aux)*Spare
42 (C84 10)Trig 2Trig 2 (VVT)
43 (C84 9)nc—
44 (C84 8)An Volt 6MAF Signal
45 (C84 7)An Volt 3TPS (Main)
46 (C84 17)Ignition 2Ignition
47 (C84 16)Ignition 3Ignition
48 (C84 15)nc—
49 (C84 14)nc—
50 (C84 13)nc—
51 (C84 12)nc—
52 (C84 22)Ground—
53 (C84 21)An Temp 3MAF IAT
54 (C84 20)An Temp 1ECT
55 (C84 19)nc—
56 (C84 18)nc—
57 (C85 4)Aux 14Fuel Pump Speed
58 (C85 3)Ignition 8CE Light
59 (C85 2)Aux 16 (Main Relay)ECU Hold Power
60 (C85 1)nc—
61 (C85 7)nc—
62 (C85 6)nc—

Expansion connector

PositionLink ECU channelFunction
Expansion 1Ground (Signal)—
Expansion 2An Volt 4—
Expansion 3An Temp 2—
Expansion 4+5V Out—
Expansion 5An Volt 5—
Expansion 6DI 3—
Expansion 7DI 4—
Expansion 8Injector 8 (Aux)—
Expansion 9An Temp 4—
Expansion 10DI 1—
Expansion 11DI 2—
Expansion 12Ignition 4 (Aux)—
Expansion 13Ignition 5 (Aux)—
Expansion 14Ignition 6 (Aux)—
Expansion 15An Volt 1—
Expansion 16An Volt 2—

Electronic-throttle connector

PositionLink ECU channelFunction
Ethrottle 1Ground (Signal)—
Ethrottle 2+5V Out—
Ethrottle 3An Volt 10—
Ethrottle 4An Volt 9—
Ethrottle 5An Volt 8—
Ethrottle 6An Volt 7—
Ethrottle 7Aux 10—
Ethrottle 8Aux 9—

MAF sensor: JZS161 2JZGE before 07/2000 (Also JZS161 2JZGTE & JZA80 2JZGTE VVTi)

The guide labels this as JZX100 MAF information but names these additional Toyota applications. Confirm the actual sensor configuration; the manufacturer warns that at least two five-wire arrangements exist.

PinSymbolFunction
1THAAir Temperature Sensor
2E2Sensor Ground (Air Temperature Sensor)
3EVGMass Airflow Sensor Ground
4+BEFI Main Relay Switched Power
5VGEngine Airflow

MAF sensor: JZS161 2JZGE after 07/2000 (Also JZS171 1JZGTE)

The guide labels this as JZX100 MAF information but names these additional Toyota applications. Confirm the actual sensor configuration; the manufacturer warns that at least two five-wire arrangements exist.

PinSymbolFunction
1+BEFI Main Relay Switched Power
2EVGMass Airflow Sensor Ground
3VGEngine Airflow
4THAAir Temperature Sensor
5E2Sensor Ground (Air Temperature Sensor)

RS232 connector

PinFunctionWire colour
1Comms GNDBrown
2ncGreen
3ncWhite
4RS232-RXGrey
5RS232-TXYellow