Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
MaxxECU standalone engine management
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

Changes from revision 2 to revision 2

Removed text is struck through; added text is highlighted.

Example GEN2 RACE BMW M54 kit. Image: MaxxECU; used with permission. Other ECU and sensor packages differ.

MaxxECU BMW M54 MS42 MS43 GEN2 plug-in adapter joins a compatible GEN2 ECU to a specified factory engine harness. This is a vehicle-specific adapter system, not a different universal ECU model. Manufacturer's installation guide.

Applicability

MaxxECU identifies a GEN2 TRACK/RACE adapter for documented MS42/MS43 applications and explicitly excludes MS45. Its guide states manual transmission only; some vehicle combinations are marked unverified. Confirm exact engine, original ECU and connector, as source tables group several engine capacities. Check the exact vehicle, engine, ECU number, harness and hardware revision against the manufacturer guide before purchasing or installing.

Manufacturer's function mapping

These assignments are specific to the documented GEN2 adapter and ECU configuration, not a universal vehicle pinout. Confirm calibration, connector face and configuration in the source.

OptionsOEM ECU PINMaxxECU IOGEN2 TRACKGEN2 RACENote6 injection sequentialC33, C34, C35, C36, C37, C38INJ 1-6YESYES6 ignition sequential (using IGBT)E3, E2, E1, E9, E8, E7IGN 1-6YESYESFuel pumpD10GPO 1YESYESThermostatC45GPO 2YESYESFAN (PWM)D4GPO 3YESYESECU relay activationB23GPO 4YESYESVANOS solenoid (exhaust)C41GPO 5YESYESVANOS solenoid (intake)C40GPO 6YESYESLambda heater-GPO 7YESYESFuel tank vent valveC42GPO 8YESYESE-Throttle with cruise controlC44, C43GPO 13/GPO 14YESYESIdle solenoid (MS42 only)C46, C47IGN 7/8YESYESNot used for idle features using our base tune, but it is still wired...DISA (intake)C49INJ 7YESYESAC magnetic clutch*D29INJ 8YESYESParallel to OEM A/C clutch (D29). Disconnect A/C to use as a general output.OEM knock sensorsC29, C31KNOCK1, KNOCK2YESYESExhaust flapD18Yes, no ctrlYes, no ctrlOnly available on M54B30, this output is always active (no control option available)External boost solenoidGPO 9 (12V)YESYESCrank triggerC8PULSE 1YESYESIntake CAM triggerC5PULSE 2YESYESExhaust CAM triggerC2PULSE 3YESYESBMW Steering wheel buttonsD27PULSE 4YESYESOE coolant temperature sensor (CLT)C24AIN 1YESYESOE intake air temperature sensor (IAT)C22AIN 2YESYESOE throttle position sensor (main)C19AIN 3YESYESOE throttle position sensor (backup)C10AIN 4YESYESOE engine oil temperature sensorC27AIN 5YESYESNo calibration available for this sensor.OE Coolant outlet temperatureD39AIN 6YESYESOE pedal sensor (main)D13 + C16 (MS42)AIN 7YESYESOE pedal sensor (backup)D8 + C9 (MS42)AIN 8YESYESOE clutch switchD23AIN 9YESYESBrake switchBMW E46 330i (MS43) CANSecondary air pump--Wideband lambda sensorUsing external harness (included)OE mass air mass flow sensor--NONOOil pressure switchC26 (MS43) / D11 (MS42)NONOOil level switch (MS42 only)C39NONOInstrument clusterBMW E46 330i (MS43) CANBluetooth ( MDash)EGT optionNOYes

Additional connector

The model-specific guide provides the following extra connector positions. Check its drawing for the view and pin labels; available outputs differ between TRACK and RACE.

PinGEN2 TRACKGEN2 RACEUsageNote1+5V sensor supply+5V sensor supplyPower source for external sensors2Sensor GNDSensor GNDSensor ground for external sensors3AIN 10AIN 100-5V analog input4AIN 11AIN 110-5V analog input5AIN 12AIN 120-5V analog input6PULSE5+AIN 177+12V switched+12V switchedBattery positive (+12V)Output at ignition on8INJ 8INJ 8OutputParallel to OEM A/C clutch (D29). Disconnect A/C to use as a general output.9GPO 10 (+12V)GPO 10 (+12V)Output10GPO 11 (+12V)GPO 11 (+12V)Output11CAN2 LAIN 20Different function depending on used MaxxECU12CAN2 HAIN 21Different function depending on used MaxxECU

Documents and wiring

See the exact adapter and pinout guide for additional connectors, wideband wiring, power feeds, fuses and any limitations. The GEN2 plug-in index and MaxxECU family reference cover other hardware and applications. Review firmware and functions for the specific setup.

Source reviewed 17 November 2026.

Rendered revisions

Open each version to inspect formatting, tables and photographs.

Revision 2: MaxxECU GEN2 BMW M54 MS42 MS43 plug-in adapter
MaxxECU GEN2 RACE BMW M54 kit
Example GEN2 RACE BMW M54 kit. Image: MaxxECU; used with permission. Other ECU and sensor packages differ.

MaxxECU BMW M54 MS42 MS43 GEN2 plug-in adapter joins a compatible GEN2 ECU to a specified factory engine harness. This is a vehicle-specific adapter system, not a different universal ECU model. Manufacturer's installation guide.

Applicability

MaxxECU identifies a GEN2 TRACK/RACE adapter for documented MS42/MS43 applications and explicitly excludes MS45. Its guide states manual transmission only; some vehicle combinations are marked unverified. Confirm exact engine, original ECU and connector, as source tables group several engine capacities. Check the exact vehicle, engine, ECU number, harness and hardware revision against the manufacturer guide before purchasing or installing.

Manufacturer's function mapping

These assignments are specific to the documented GEN2 adapter and ECU configuration, not a universal vehicle pinout. Confirm calibration, connector face and configuration in the source.

OptionsOEM ECU PINMaxxECU IOGEN2 TRACKGEN2 RACENote
6 injection sequentialC33, C34, C35, C36, C37, C38INJ 1-6YESYES
6 ignition sequential (using IGBT)E3, E2, E1, E9, E8, E7IGN 1-6YESYES
Fuel pumpD10GPO 1YESYES
ThermostatC45GPO 2YESYES
FAN (PWM)D4GPO 3YESYES
ECU relay activationB23GPO 4YESYES
VANOS solenoid (exhaust)C41GPO 5YESYES
VANOS solenoid (intake)C40GPO 6YESYES
Lambda heater-GPO 7YESYES
Fuel tank vent valveC42GPO 8YESYES
E-Throttle with cruise controlC44, C43GPO 13/GPO 14YESYES
Idle solenoid (MS42 only)C46, C47IGN 7/8YESYESNot used for idle features using our base tune, but it is still wired...
DISA (intake)C49INJ 7YESYES
AC magnetic clutch*D29INJ 8YESYESParallel to OEM A/C clutch (D29). Disconnect A/C to use as a general output.
OEM knock sensorsC29, C31KNOCK1, KNOCK2YESYES
Exhaust flapD18Yes, no ctrlYes, no ctrlOnly available on M54B30, this output is always active (no control option available)
External boost solenoidGPO 9 (12V)YESYES
Crank triggerC8PULSE 1YESYES
Intake CAM triggerC5PULSE 2YESYES
Exhaust CAM triggerC2PULSE 3YESYES
BMW Steering wheel buttonsD27PULSE 4YESYES
OE coolant temperature sensor (CLT)C24AIN 1YESYES
OE intake air temperature sensor (IAT)C22AIN 2YESYES
OE throttle position sensor (main)C19AIN 3YESYES
OE throttle position sensor (backup)C10AIN 4YESYES
OE engine oil temperature sensorC27AIN 5YESYESNo calibration available for this sensor.
OE Coolant outlet temperatureD39AIN 6YESYES
OE pedal sensor (main)D13 + C16 (MS42)AIN 7YESYES
OE pedal sensor (backup)D8 + C9 (MS42)AIN 8YESYES
OE clutch switchD23AIN 9YESYES
Brake switchBMW E46 330i (MS43) CAN
Secondary air pump--
Wideband lambda sensorUsing external harness (included)
OE mass air mass flow sensor--NONO
Oil pressure switchC26 (MS43) / D11 (MS42)NONO
Oil level switch (MS42 only)C39NONO
Instrument clusterBMW E46 330i (MS43) CAN
Bluetooth ( MDash)
EGT optionNOYes

Additional connector

The model-specific guide provides the following extra connector positions. Check its drawing for the view and pin labels; available outputs differ between TRACK and RACE.

PinGEN2 TRACKGEN2 RACEUsageNote
1+5V sensor supply+5V sensor supplyPower source for external sensors
2Sensor GNDSensor GNDSensor ground for external sensors
3AIN 10AIN 100-5V analog input
4AIN 11AIN 110-5V analog input
5AIN 12AIN 120-5V analog input
6PULSE5+AIN 17
7+12V switched+12V switchedBattery positive (+12V)Output at ignition on
8INJ 8INJ 8OutputParallel to OEM A/C clutch (D29). Disconnect A/C to use as a general output.
9GPO 10 (+12V)GPO 10 (+12V)Output
10GPO 11 (+12V)GPO 11 (+12V)Output
11CAN2 LAIN 20Different function depending on used MaxxECU
12CAN2 HAIN 21Different function depending on used MaxxECU

Documents and wiring

See the exact adapter and pinout guide for additional connectors, wideband wiring, power feeds, fuses and any limitations. The GEN2 plug-in index and MaxxECU family reference cover other hardware and applications. Review firmware and functions for the specific setup.

Source reviewed 17 November 2026.

Revision 2: MaxxECU GEN2 BMW M54 MS42 MS43 plug-in adapter
MaxxECU GEN2 RACE BMW M54 kit
Example GEN2 RACE BMW M54 kit. Image: MaxxECU; used with permission. Other ECU and sensor packages differ.

MaxxECU BMW M54 MS42 MS43 GEN2 plug-in adapter joins a compatible GEN2 ECU to a specified factory engine harness. This is a vehicle-specific adapter system, not a different universal ECU model. Manufacturer's installation guide.

Applicability

MaxxECU identifies a GEN2 TRACK/RACE adapter for documented MS42/MS43 applications and explicitly excludes MS45. Its guide states manual transmission only; some vehicle combinations are marked unverified. Confirm exact engine, original ECU and connector, as source tables group several engine capacities. Check the exact vehicle, engine, ECU number, harness and hardware revision against the manufacturer guide before purchasing or installing.

Manufacturer's function mapping

These assignments are specific to the documented GEN2 adapter and ECU configuration, not a universal vehicle pinout. Confirm calibration, connector face and configuration in the source.

OptionsOEM ECU PINMaxxECU IOGEN2 TRACKGEN2 RACENote
6 injection sequentialC33, C34, C35, C36, C37, C38INJ 1-6YESYES
6 ignition sequential (using IGBT)E3, E2, E1, E9, E8, E7IGN 1-6YESYES
Fuel pumpD10GPO 1YESYES
ThermostatC45GPO 2YESYES
FAN (PWM)D4GPO 3YESYES
ECU relay activationB23GPO 4YESYES
VANOS solenoid (exhaust)C41GPO 5YESYES
VANOS solenoid (intake)C40GPO 6YESYES
Lambda heater-GPO 7YESYES
Fuel tank vent valveC42GPO 8YESYES
E-Throttle with cruise controlC44, C43GPO 13/GPO 14YESYES
Idle solenoid (MS42 only)C46, C47IGN 7/8YESYESNot used for idle features using our base tune, but it is still wired...
DISA (intake)C49INJ 7YESYES
AC magnetic clutch*D29INJ 8YESYESParallel to OEM A/C clutch (D29). Disconnect A/C to use as a general output.
OEM knock sensorsC29, C31KNOCK1, KNOCK2YESYES
Exhaust flapD18Yes, no ctrlYes, no ctrlOnly available on M54B30, this output is always active (no control option available)
External boost solenoidGPO 9 (12V)YESYES
Crank triggerC8PULSE 1YESYES
Intake CAM triggerC5PULSE 2YESYES
Exhaust CAM triggerC2PULSE 3YESYES
BMW Steering wheel buttonsD27PULSE 4YESYES
OE coolant temperature sensor (CLT)C24AIN 1YESYES
OE intake air temperature sensor (IAT)C22AIN 2YESYES
OE throttle position sensor (main)C19AIN 3YESYES
OE throttle position sensor (backup)C10AIN 4YESYES
OE engine oil temperature sensorC27AIN 5YESYESNo calibration available for this sensor.
OE Coolant outlet temperatureD39AIN 6YESYES
OE pedal sensor (main)D13 + C16 (MS42)AIN 7YESYES
OE pedal sensor (backup)D8 + C9 (MS42)AIN 8YESYES
OE clutch switchD23AIN 9YESYES
Brake switchBMW E46 330i (MS43) CAN
Secondary air pump--
Wideband lambda sensorUsing external harness (included)
OE mass air mass flow sensor--NONO
Oil pressure switchC26 (MS43) / D11 (MS42)NONO
Oil level switch (MS42 only)C39NONO
Instrument clusterBMW E46 330i (MS43) CAN
Bluetooth ( MDash)
EGT optionNOYes

Additional connector

The model-specific guide provides the following extra connector positions. Check its drawing for the view and pin labels; available outputs differ between TRACK and RACE.

PinGEN2 TRACKGEN2 RACEUsageNote
1+5V sensor supply+5V sensor supplyPower source for external sensors
2Sensor GNDSensor GNDSensor ground for external sensors
3AIN 10AIN 100-5V analog input
4AIN 11AIN 110-5V analog input
5AIN 12AIN 120-5V analog input
6PULSE5+AIN 17
7+12V switched+12V switchedBattery positive (+12V)Output at ignition on
8INJ 8INJ 8OutputParallel to OEM A/C clutch (D29). Disconnect A/C to use as a general output.
9GPO 10 (+12V)GPO 10 (+12V)Output
10GPO 11 (+12V)GPO 11 (+12V)Output
11CAN2 LAIN 20Different function depending on used MaxxECU
12CAN2 HAIN 21Different function depending on used MaxxECU

Documents and wiring

See the exact adapter and pinout guide for additional connectors, wideband wiring, power feeds, fuses and any limitations. The GEN2 plug-in index and MaxxECU family reference cover other hardware and applications. Review firmware and functions for the specific setup.

Source reviewed 17 November 2026.