Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
MaxxECU standalone engine management
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None
MaxxECU GEN2 RACE BMW M54 kit
Example GEN2 RACE BMW M54 kit. Image: MaxxECU; used with permission. Other ECU and sensor packages differ.

MaxxECU BMW M54 MS42 MS43 GEN2 plug-in adapter joins a compatible GEN2 ECU to a specified factory engine harness. This is a vehicle-specific adapter system, not a different universal ECU model. Manufacturer's installation guide.

Applicability

MaxxECU identifies a GEN2 TRACK/RACE adapter for documented MS42/MS43 applications and explicitly excludes MS45. Its guide states manual transmission only; some vehicle combinations are marked unverified. Confirm exact engine, original ECU and connector, as source tables group several engine capacities. Check the exact vehicle, engine, ECU number, harness and hardware revision against the manufacturer guide before purchasing or installing.

Manufacturer's function mapping

These assignments are specific to the documented GEN2 adapter and ECU configuration, not a universal vehicle pinout. Confirm calibration, connector face and configuration in the source.

OptionsOEM ECU PINMaxxECU IOGEN2 TRACKGEN2 RACENote
6 injection sequentialC33, C34, C35, C36, C37, C38INJ 1-6YESYES
6 ignition sequential (using IGBT)E3, E2, E1, E9, E8, E7IGN 1-6YESYES
Fuel pumpD10GPO 1YESYES
ThermostatC45GPO 2YESYES
FAN (PWM)D4GPO 3YESYES
ECU relay activationB23GPO 4YESYES
VANOS solenoid (exhaust)C41GPO 5YESYES
VANOS solenoid (intake)C40GPO 6YESYES
Lambda heater-GPO 7YESYES
Fuel tank vent valveC42GPO 8YESYES
E-Throttle with cruise controlC44, C43GPO 13/GPO 14YESYES
Idle solenoid (MS42 only)C46, C47IGN 7/8YESYESNot used for idle features using our base tune, but it is still wired...
DISA (intake)C49INJ 7YESYES
AC magnetic clutch*D29INJ 8YESYESParallel to OEM A/C clutch (D29). Disconnect A/C to use as a general output.
OEM knock sensorsC29, C31KNOCK1, KNOCK2YESYES
Exhaust flapD18Yes, no ctrlYes, no ctrlOnly available on M54B30, this output is always active (no control option available)
External boost solenoidGPO 9 (12V)YESYES
Crank triggerC8PULSE 1YESYES
Intake CAM triggerC5PULSE 2YESYES
Exhaust CAM triggerC2PULSE 3YESYES
BMW Steering wheel buttonsD27PULSE 4YESYES
OE coolant temperature sensor (CLT)C24AIN 1YESYES
OE intake air temperature sensor (IAT)C22AIN 2YESYES
OE throttle position sensor (main)C19AIN 3YESYES
OE throttle position sensor (backup)C10AIN 4YESYES
OE engine oil temperature sensorC27AIN 5YESYESNo calibration available for this sensor.
OE Coolant outlet temperatureD39AIN 6YESYES
OE pedal sensor (main)D13 + C16 (MS42)AIN 7YESYES
OE pedal sensor (backup)D8 + C9 (MS42)AIN 8YESYES
OE clutch switchD23AIN 9YESYES
Brake switchBMW E46 330i (MS43) CAN
Secondary air pump--
Wideband lambda sensorUsing external harness (included)
OE mass air mass flow sensor--NONO
Oil pressure switchC26 (MS43) / D11 (MS42)NONO
Oil level switch (MS42 only)C39NONO
Instrument clusterBMW E46 330i (MS43) CAN
Bluetooth ( MDash)
EGT optionNOYes

Additional connector

The model-specific guide provides the following extra connector positions. Check its drawing for the view and pin labels; available outputs differ between TRACK and RACE.

PinGEN2 TRACKGEN2 RACEUsageNote
1+5V sensor supply+5V sensor supplyPower source for external sensors
2Sensor GNDSensor GNDSensor ground for external sensors
3AIN 10AIN 100-5V analog input
4AIN 11AIN 110-5V analog input
5AIN 12AIN 120-5V analog input
6PULSE5+AIN 17
7+12V switched+12V switchedBattery positive (+12V)Output at ignition on
8INJ 8INJ 8OutputParallel to OEM A/C clutch (D29). Disconnect A/C to use as a general output.
9GPO 10 (+12V)GPO 10 (+12V)Output
10GPO 11 (+12V)GPO 11 (+12V)Output
11CAN2 LAIN 20Different function depending on used MaxxECU
12CAN2 HAIN 21Different function depending on used MaxxECU

Documents and wiring

See the exact adapter and pinout guide for additional connectors, wideband wiring, power feeds, fuses and any limitations. The GEN2 plug-in index and MaxxECU family reference cover other hardware and applications. Review firmware and functions for the specific setup.

Source reviewed 17 November 2026.