Removed text is struck through; added text is highlighted.
Manufacturer's plug-in kit image: MaxxECU; used with permission. Confirm kit contents for the exact application.
MaxxECU Ford Focus RS/ST 2005 - 2012 (ME 9.0) OEM CAN plug-in adapter connects a compatible MaxxECU to an application-specific factory wiring loom. It is an adapter and installation package rather than a new universal ECU architecture. The published MaxxECU application guide identifies its intended configuration and connector details.
Identification and scope
Match the vehicle, engine, original ECU and connector, transmission, adapter revision and the MaxxECU unit to the guide. GEN1 adapters and earlier V1-specific adapters are not automatically interchangeable. The manufacturer's GEN1 adapter index separates the vehicle-specific instructions.
Manufacturer-listed examples
These examples and qualifications are transcribed from the manufacturer's adapter guide. A listed platform is not proof that every market or hardware combination is compatible; check the exact ECU, loom and transmission.
Manufacturer's mapping and availability for this particular adapter; a yes or no applies only to the configuration named in the table. Confirm adapter revision, hardware and calibration with the original guide.
OptionsOEM ECU PINMaxxECU IORACENoteAC magnetic clutchGPO 1YesBoost solenoid (OEM)GPO 3YesVVT solenoid (intake)GPO 4YesFuel pump relayGPO 5YesEngine FAN (PWM)GPO 6YesVVT solenoid (exhaust)GPO 7YesE-ThrottleGPO 11/12YesTachometerFord Focus RS/ST 2005 - 2012 (ME 9.0) OEM CAN CANYesTank ventilation valveINJ 6YesShift solenoid (4-5)INJ 7YesFuel pressure sensorAIN 3YesKnock sensors (OEM)KNOCK1/KNOCK2YesAC pressure sensorAIN 7YesClutch switchFord Focus RS/ST 2005 - 2012 (ME 9.0) OEM CAN CANYESVehicle speed (VSS)Ford Focus RS/ST 2005 - 2012 (ME 9.0) OEM CAN CANYesEPC lightFord Focus RS/ST 2005 - 2012 (ME 9.0) OEM CAN CANYesInstrument cluster/ABSFord Focus RS/ST 2005 - 2012 (ME 9.0) OEM CAN CANYesFuel consumption-NoOil pressure switchDIN 4YesConnected to oil level warning lamp in dash using CANCheck engine lightFord Focus RS/ST 2005 - 2012 (ME 9.0) OEM CAN CANYesOil pressure warningFord Focus RS/ST 2005 - 2012 (ME 9.0) OEM CAN CANYesBluetooth ( MDash)-YesEGT option-Yes, direct6 EGT direct in harnessOEM EGT-sensors-No
Additional connector
The following is the extra connector table in the model-specific guide. Refer to its illustrated connector and installation notes for view, cable colours, electrical limits and revision; these positions are not the factory ECU connector.
PinDescriptionUsageNote1 (H)+5V sensor supply2 (G)Sensor GND3 (F)TPS AIN0-5V analog input4 (E)AIN 40-5V analog input5 (D)6 (C)AIN 1temperature input7 (B)AIN 2temperature input8 (A)AIN 80-5V analog input9 (S)INJ 8Output10 (R)-11 (P)-12 (N)+12V power supplyOutput at ignition on13 (M)Engine GND14 (L)-15 (K)GPO 15 (+12V)Output+12V output16 (J)GPO 16 (+12V)Output+12V output
Installation and verification
The adapter may require an external wideband sensor, a MAP hose, additional connectors, or other changes depending on the application and kit. Do not assume that every factory function, emissions device, dashboard feature, air-conditioning function or transmission is supported. Check the model-specific tables, base configuration and full manufacturer installation guide for the exact unit before connection and calibration.
Documents
MaxxECU Ford Focus RS/ST 2005 - 2012 (ME 9.0) OEM CAN adapter installation and pinoutGEN1 plug-in compatibility and wiring indexMaxxECU manufacturer and universal-model index
Sources reviewed 17 November 2026.
Rendered revisions
Open each version to inspect formatting, tables and photographs.
Revision 2: MaxxECU Ford Focus RS/ST 2005 - 2012 (ME 9.0) OEM CAN plug-in adapterManufacturer's plug-in kit image: MaxxECU; used with permission. Confirm kit contents for the exact application.
MaxxECU Ford Focus RS/ST 2005 - 2012 (ME 9.0) OEM CAN plug-in adapter connects a compatible MaxxECU to an application-specific factory wiring loom. It is an adapter and installation package rather than a new universal ECU architecture. The published MaxxECU application guide identifies its intended configuration and connector details.
Identification and scope
Match the vehicle, engine, original ECU and connector, transmission, adapter revision and the MaxxECU unit to the guide. GEN1 adapters and earlier V1-specific adapters are not automatically interchangeable. The manufacturer's GEN1 adapter index separates the vehicle-specific instructions.
Manufacturer-listed examples
These examples and qualifications are transcribed from the manufacturer's adapter guide. A listed platform is not proof that every market or hardware combination is compatible; check the exact ECU, loom and transmission.
Vehicle
Engine code
Year
LSU sensor
Note
Ford Focus RS MK2
JZDA
2009 - 2011
Uses stock wideband LSU 4.2 sensor
Ford Focus RS500 MK2
JZDA
2010 - 2011
Uses stock wideband LSU 4.2 sensor
Ford Focus ST/ST225 MK2
HYDA
2005 - 2012
Uses stock wideband LSU 4.2 sensor
Vehicle and ECU functions
Manufacturer's mapping and availability for this particular adapter; a yes or no applies only to the configuration named in the table. Confirm adapter revision, hardware and calibration with the original guide.
Options
OEM ECU PIN
MaxxECU IO
RACE
Note
AC magnetic clutch
GPO 1
Yes
Boost solenoid (OEM)
GPO 3
Yes
VVT solenoid (intake)
GPO 4
Yes
Fuel pump relay
GPO 5
Yes
Engine FAN (PWM)
GPO 6
Yes
VVT solenoid (exhaust)
GPO 7
Yes
E-Throttle
GPO 11/12
Yes
Tachometer
Ford Focus RS/ST 2005 - 2012 (ME 9.0) OEM CAN CAN
Yes
Tank ventilation valve
INJ 6
Yes
Shift solenoid (4-5)
INJ 7
Yes
Fuel pressure sensor
AIN 3
Yes
Knock sensors (OEM)
KNOCK1/KNOCK2
Yes
AC pressure sensor
AIN 7
Yes
Clutch switch
Ford Focus RS/ST 2005 - 2012 (ME 9.0) OEM CAN CAN
YES
Vehicle speed (VSS)
Ford Focus RS/ST 2005 - 2012 (ME 9.0) OEM CAN CAN
Yes
EPC light
Ford Focus RS/ST 2005 - 2012 (ME 9.0) OEM CAN CAN
Yes
Instrument cluster/ABS
Ford Focus RS/ST 2005 - 2012 (ME 9.0) OEM CAN CAN
Yes
Fuel consumption
-
No
Oil pressure switch
DIN 4
Yes
Connected to oil level warning lamp in dash using CAN
Check engine light
Ford Focus RS/ST 2005 - 2012 (ME 9.0) OEM CAN CAN
Yes
Oil pressure warning
Ford Focus RS/ST 2005 - 2012 (ME 9.0) OEM CAN CAN
Yes
Bluetooth ( MDash)
-
Yes
EGT option
-
Yes, direct
6 EGT direct in harness
OEM EGT-sensors
-
No
Additional connector
The following is the extra connector table in the model-specific guide. Refer to its illustrated connector and installation notes for view, cable colours, electrical limits and revision; these positions are not the factory ECU connector.
Pin
Description
Usage
Note
1 (H)
+5V sensor supply
2 (G)
Sensor GND
3 (F)
TPS AIN
0-5V analog input
4 (E)
AIN 4
0-5V analog input
5 (D)
6 (C)
AIN 1
temperature input
7 (B)
AIN 2
temperature input
8 (A)
AIN 8
0-5V analog input
9 (S)
INJ 8
Output
10 (R)
-
11 (P)
-
12 (N)
+12V power supply
Output at ignition on
13 (M)
Engine GND
14 (L)
-
15 (K)
GPO 15 (+12V)
Output
+12V output
16 (J)
GPO 16 (+12V)
Output
+12V output
Installation and verification
The adapter may require an external wideband sensor, a MAP hose, additional connectors, or other changes depending on the application and kit. Do not assume that every factory function, emissions device, dashboard feature, air-conditioning function or transmission is supported. Check the model-specific tables, base configuration and full manufacturer installation guide for the exact unit before connection and calibration.
Revision 2: MaxxECU Ford Focus RS/ST 2005 - 2012 (ME 9.0) OEM CAN plug-in adapterManufacturer's plug-in kit image: MaxxECU; used with permission. Confirm kit contents for the exact application.
MaxxECU Ford Focus RS/ST 2005 - 2012 (ME 9.0) OEM CAN plug-in adapter connects a compatible MaxxECU to an application-specific factory wiring loom. It is an adapter and installation package rather than a new universal ECU architecture. The published MaxxECU application guide identifies its intended configuration and connector details.
Identification and scope
Match the vehicle, engine, original ECU and connector, transmission, adapter revision and the MaxxECU unit to the guide. GEN1 adapters and earlier V1-specific adapters are not automatically interchangeable. The manufacturer's GEN1 adapter index separates the vehicle-specific instructions.
Manufacturer-listed examples
These examples and qualifications are transcribed from the manufacturer's adapter guide. A listed platform is not proof that every market or hardware combination is compatible; check the exact ECU, loom and transmission.
Vehicle
Engine code
Year
LSU sensor
Note
Ford Focus RS MK2
JZDA
2009 - 2011
Uses stock wideband LSU 4.2 sensor
Ford Focus RS500 MK2
JZDA
2010 - 2011
Uses stock wideband LSU 4.2 sensor
Ford Focus ST/ST225 MK2
HYDA
2005 - 2012
Uses stock wideband LSU 4.2 sensor
Vehicle and ECU functions
Manufacturer's mapping and availability for this particular adapter; a yes or no applies only to the configuration named in the table. Confirm adapter revision, hardware and calibration with the original guide.
Options
OEM ECU PIN
MaxxECU IO
RACE
Note
AC magnetic clutch
GPO 1
Yes
Boost solenoid (OEM)
GPO 3
Yes
VVT solenoid (intake)
GPO 4
Yes
Fuel pump relay
GPO 5
Yes
Engine FAN (PWM)
GPO 6
Yes
VVT solenoid (exhaust)
GPO 7
Yes
E-Throttle
GPO 11/12
Yes
Tachometer
Ford Focus RS/ST 2005 - 2012 (ME 9.0) OEM CAN CAN
Yes
Tank ventilation valve
INJ 6
Yes
Shift solenoid (4-5)
INJ 7
Yes
Fuel pressure sensor
AIN 3
Yes
Knock sensors (OEM)
KNOCK1/KNOCK2
Yes
AC pressure sensor
AIN 7
Yes
Clutch switch
Ford Focus RS/ST 2005 - 2012 (ME 9.0) OEM CAN CAN
YES
Vehicle speed (VSS)
Ford Focus RS/ST 2005 - 2012 (ME 9.0) OEM CAN CAN
Yes
EPC light
Ford Focus RS/ST 2005 - 2012 (ME 9.0) OEM CAN CAN
Yes
Instrument cluster/ABS
Ford Focus RS/ST 2005 - 2012 (ME 9.0) OEM CAN CAN
Yes
Fuel consumption
-
No
Oil pressure switch
DIN 4
Yes
Connected to oil level warning lamp in dash using CAN
Check engine light
Ford Focus RS/ST 2005 - 2012 (ME 9.0) OEM CAN CAN
Yes
Oil pressure warning
Ford Focus RS/ST 2005 - 2012 (ME 9.0) OEM CAN CAN
Yes
Bluetooth ( MDash)
-
Yes
EGT option
-
Yes, direct
6 EGT direct in harness
OEM EGT-sensors
-
No
Additional connector
The following is the extra connector table in the model-specific guide. Refer to its illustrated connector and installation notes for view, cable colours, electrical limits and revision; these positions are not the factory ECU connector.
Pin
Description
Usage
Note
1 (H)
+5V sensor supply
2 (G)
Sensor GND
3 (F)
TPS AIN
0-5V analog input
4 (E)
AIN 4
0-5V analog input
5 (D)
6 (C)
AIN 1
temperature input
7 (B)
AIN 2
temperature input
8 (A)
AIN 8
0-5V analog input
9 (S)
INJ 8
Output
10 (R)
-
11 (P)
-
12 (N)
+12V power supply
Output at ignition on
13 (M)
Engine GND
14 (L)
-
15 (K)
GPO 15 (+12V)
Output
+12V output
16 (J)
GPO 16 (+12V)
Output
+12V output
Installation and verification
The adapter may require an external wideband sensor, a MAP hose, additional connectors, or other changes depending on the application and kit. Do not assume that every factory function, emissions device, dashboard feature, air-conditioning function or transmission is supported. Check the model-specific tables, base configuration and full manufacturer installation guide for the exact unit before connection and calibration.