
MaxxECU Ford Focus RS/ST 2005 - 2012 (ME 9.0) OEM CAN plug-in adapter connects a compatible MaxxECU to an application-specific factory wiring loom. It is an adapter and installation package rather than a new universal ECU architecture. The published MaxxECU application guide identifies its intended configuration and connector details.
Identification and scope
Match the vehicle, engine, original ECU and connector, transmission, adapter revision and the MaxxECU unit to the guide. GEN1 adapters and earlier V1-specific adapters are not automatically interchangeable. The manufacturer's GEN1 adapter index separates the vehicle-specific instructions.
Manufacturer-listed examples
These examples and qualifications are transcribed from the manufacturer's adapter guide. A listed platform is not proof that every market or hardware combination is compatible; check the exact ECU, loom and transmission.
| Vehicle | Engine code | Year | LSU sensor | Note |
|---|---|---|---|---|
| Ford Focus RS MK2 | JZDA | 2009 - 2011 | Uses stock wideband LSU 4.2 sensor | |
| Ford Focus RS500 MK2 | JZDA | 2010 - 2011 | Uses stock wideband LSU 4.2 sensor | |
| Ford Focus ST/ST225 MK2 | HYDA | 2005 - 2012 | Uses stock wideband LSU 4.2 sensor |
Vehicle and ECU functions
Manufacturer's mapping and availability for this particular adapter; a yes or no applies only to the configuration named in the table. Confirm adapter revision, hardware and calibration with the original guide.
| Options | OEM ECU PIN | MaxxECU IO | RACE | Note |
|---|---|---|---|---|
| AC magnetic clutch | GPO 1 | Yes | ||
| Boost solenoid (OEM) | GPO 3 | Yes | ||
| VVT solenoid (intake) | GPO 4 | Yes | ||
| Fuel pump relay | GPO 5 | Yes | ||
| Engine FAN (PWM) | GPO 6 | Yes | ||
| VVT solenoid (exhaust) | GPO 7 | Yes | ||
| E-Throttle | GPO 11/12 | Yes | ||
| Tachometer | Ford Focus RS/ST 2005 - 2012 (ME 9.0) OEM CAN CAN | Yes | ||
| Tank ventilation valve | INJ 6 | Yes | ||
| Shift solenoid (4-5) | INJ 7 | Yes | ||
| Fuel pressure sensor | AIN 3 | Yes | ||
| Knock sensors (OEM) | KNOCK1/KNOCK2 | Yes | ||
| AC pressure sensor | AIN 7 | Yes | ||
| Clutch switch | Ford Focus RS/ST 2005 - 2012 (ME 9.0) OEM CAN CAN | YES | ||
| Vehicle speed (VSS) | Ford Focus RS/ST 2005 - 2012 (ME 9.0) OEM CAN CAN | Yes | ||
| EPC light | Ford Focus RS/ST 2005 - 2012 (ME 9.0) OEM CAN CAN | Yes | ||
| Instrument cluster/ABS | Ford Focus RS/ST 2005 - 2012 (ME 9.0) OEM CAN CAN | Yes | ||
| Fuel consumption | - | No | ||
| Oil pressure switch | DIN 4 | Yes | Connected to oil level warning lamp in dash using CAN | |
| Check engine light | Ford Focus RS/ST 2005 - 2012 (ME 9.0) OEM CAN CAN | Yes | ||
| Oil pressure warning | Ford Focus RS/ST 2005 - 2012 (ME 9.0) OEM CAN CAN | Yes | ||
| Bluetooth ( MDash) | - | Yes | ||
| EGT option | - | Yes, direct | 6 EGT direct in harness | |
| OEM EGT-sensors | - | No |
Additional connector
The following is the extra connector table in the model-specific guide. Refer to its illustrated connector and installation notes for view, cable colours, electrical limits and revision; these positions are not the factory ECU connector.
| Pin | Description | Usage | Note |
|---|---|---|---|
| 1 (H) | +5V sensor supply | ||
| 2 (G) | Sensor GND | ||
| 3 (F) | TPS AIN | 0-5V analog input | |
| 4 (E) | AIN 4 | 0-5V analog input | |
| 5 (D) | |||
| 6 (C) | AIN 1 | temperature input | |
| 7 (B) | AIN 2 | temperature input | |
| 8 (A) | AIN 8 | 0-5V analog input | |
| 9 (S) | INJ 8 | Output | |
| 10 (R) | - | ||
| 11 (P) | - | ||
| 12 (N) | +12V power supply | Output at ignition on | |
| 13 (M) | Engine GND | ||
| 14 (L) | - | ||
| 15 (K) | GPO 15 (+12V) | Output | +12V output |
| 16 (J) | GPO 16 (+12V) | Output | +12V output |
Installation and verification
The adapter may require an external wideband sensor, a MAP hose, additional connectors, or other changes depending on the application and kit. Do not assume that every factory function, emissions device, dashboard feature, air-conditioning function or transmission is supported. Check the model-specific tables, base configuration and full manufacturer installation guide for the exact unit before connection and calibration.
Documents
- MaxxECU Ford Focus RS/ST 2005 - 2012 (ME 9.0) OEM CAN adapter installation and pinout
- GEN1 plug-in compatibility and wiring index
- MaxxECU manufacturer and universal-model index
Sources reviewed 17 November 2026.