Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
ECUMaster EMU Black
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None
ECUMaster EMU Black Lotus 2ZR-FE plug-in ECU
ECUMaster EMU Black Lotus 2ZR-FE plug-in. Product photo: ECUMaster plug-in ECU catalogue; reproduced with permission.

ECUMaster lists a Lotus 2ZR-FE EMU Black plug-in unit. ECUMaster USA describes its ECU as suitable for Elise 2ZR-FE 220, 250 and 260 Cup configurations and lists 2012–2021 Elise; confirm exact engine, body, original connector and regional variant with the supplier. Model source · ECUMaster plug-in catalogue.

Wiring and pinout

The manufacturer labels its diagram “2ZR extension wiring Pin out”; the following black and grey auxiliary connector positions do not represent the complete factory engine connector. See the diagram for connector orientation and full electrical context. Manufacturer model-specific document.

TerminalDocumented function
Black 1–5+5 V, CAN switch-board analogue 6, 7, 8, sensor ground
Black 6–12Wideband heater, Ip, Vs, Rcal, VGnd, switched +12 V, power ground
Grey 1–6CAN H, CAN L, RS232 TX, RS232 RX, flex-fuel input, sensor ground
Grey 7–12Analogue 6, analogue 5, EGT 2, EGT 1, +5 V, sensor ground

Calibration and fitment checks

Record the engine code, ECU label and hardware, factory wiring and software version. The manufacturer provides software, available application notes and base maps; a base map is a starting point requiring checks of sensor readings, throttle operation, injector and ignition settings, trigger timing and engine calibration. Do not transfer universal EMU Black pin numbers or another plug-in's auxiliary connector assignments to this unit.

See the EMU Black model page and manufacturer index.