Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
Haltech standalone ECUs
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

Haltech F9 is a historical engine-management designation. Historic F-series fuel controller; Haltech's manual archive groups F9 and F9A in a single manual, while the wiring archive lists the F9 harness and auxiliary wiring. See the Haltech discontinued manuals archive and wiring archive.

Recorded scope

FieldEvidence-qualified detail
Control scopefuel only
Archive recordsF9/F9A manual, F9 wiring and auxiliary diagram
Vehicle fitmentVerify specific ECU part number and application; no universal fitment inferred.

The period Haltech history distinguishes fuel-only F products from E-series combined systems. For F9, exact features depend on the controller and relevant source, and unverified specifications are not inferred from a related model.

Wiring and software

Choose the F9-labelled documents in Haltech's discontinued manual and connector archive and discontinued wiring-diagram index; confirm loom variant, pin orientation, sensor supply and driver ratings before wiring. Source diagrams should be used in place of assuming that suffix variants share pins. Haltech also lists legacy software for older models; check the supplied version and operating system.

See Haltech ECU family overview for the wider range.