Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
MaxxECU standalone engine management
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None
MaxxECU Nissan Skyline R32/33 GT-R/GTS-T (RB25/26) plug-in kit
MaxxECU Nissan Skyline R32/33 GT-R/GTS-T (RB25/26) plug-in product image. Source: MaxxECU; used with permission. Illustrative kit; confirm included hardware for the particular package.

MaxxECU Nissan Skyline R32/33 GT-R/GTS-T (RB25/26) plug-in adapter connects a compatible MaxxECU to an application-specific factory wiring loom. It is an adapter and installation package rather than a new universal ECU architecture. The published MaxxECU application guide identifies its intended configuration and connector details.

Identification and scope

Match the vehicle, engine, original ECU and connector, transmission, adapter revision and the MaxxECU unit to the guide. GEN1 adapters and earlier V1-specific adapters are not automatically interchangeable. The manufacturer's GEN1 adapter index separates the vehicle-specific instructions.

Manufacturer-listed examples

These examples and qualifications are transcribed from the manufacturer's adapter guide. A listed platform is not proof that every market or hardware combination is compatible; check the exact ECU, loom and transmission.

VehicleEngine codeYearLSU sensorNote
Nissan Skyline R32 GTSRB251989 - 1993External sensor needed
Nissan Skyline R32 GT-RRB261989 - 1993External sensor needed
Nissan Skyline R33 GTS-TRB251993 - 1998External sensor needed
Nissan Skyline R33 GT-RRB261993 - 1998External sensor needed

Vehicle and ECU functions

Manufacturer's mapping and availability for this particular adapter; a yes or no applies only to the configuration named in the table. Confirm adapter revision, hardware and calibration with the original guide.

OptionsMaxxECU IOSTREETV1/RACE/PRO
Fuel pumpGPO 2YesYes
TachometerGPO 8YesYes
Boost solenoidGPO 3YesYes
Vehicle speedDIN 1YesYes
AC requestDIN 2YesYes
Error lightGPO 5NoYes
Idle solenoidGPO 4NoYes
ACGPO 6NoYes
VCT (RB25 only)INJ 7NoYes
Bluetooth ( MDash)-NoYes
Knock sensor(s)-NoNo
EGT option-Yes, externalYes, direct

Additional connector

The following is the extra connector table in the model-specific guide. Refer to its illustrated connector and installation notes for view, cable colours, electrical limits and revision; these positions are not the factory ECU connector.

PinDescriptionUsageNote
1Wide band (VREF)
2Wide band (VS)
3Wide band (shield)
4Wide band (H-)
5GPO 7 / DIN 3Output or digital inputNot available on MaxxECU STREET
6-
7-
8INJ 8OutputNot available on MaxxECU STREET
9Wide band (IP)
10Wide band (RCAL)
11+12VOutput
12+12VOutput
13Engine GND
14AIN 1temperature input
15AIN 2temperature input
16AIN 30-5V analog input

Installation and verification

The adapter may require an external wideband sensor, a MAP hose, additional connectors, or other changes depending on the application and kit. Do not assume that every factory function, emissions device, dashboard feature, air-conditioning function or transmission is supported. Check the model-specific tables, base configuration and full manufacturer installation guide for the exact unit before connection and calibration.

Documents

Sources reviewed 17 November 2026.