Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
MaxxECU standalone engine management
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None
MaxxECU Audi S3/A4 (ME 7.5) plug-in kit
MaxxECU Audi S3/A4 (ME 7.5) plug-in product image. Source: MaxxECU; used with permission. Illustrative kit; confirm included hardware for the particular package.

MaxxECU Audi S3/A4 (ME 7.5) plug-in adapter connects a compatible MaxxECU to an application-specific factory wiring loom. It is an adapter and installation package rather than a new universal ECU architecture. The published MaxxECU application guide identifies its intended configuration and connector details.

Identification and scope

Match the vehicle, engine, original ECU and connector, transmission, adapter revision and the MaxxECU unit to the guide. GEN1 adapters and earlier V1-specific adapters are not automatically interchangeable. The manufacturer's GEN1 adapter index separates the vehicle-specific instructions.

Manufacturer-listed examples

These examples and qualifications are transcribed from the manufacturer's adapter guide. A listed platform is not proof that every market or hardware combination is compatible; check the exact ECU, loom and transmission.

VehicleEngine codeYearLSU sensorNote
Audi A4APU1999External sensor needed
Audi S3BAM1999 - 2003Uses stock LSU 4.2 sensor
Audi S3AMK2000-2003Uses stock LSU 4.2 sensor
Audi S3APY1998-1999External sensor needed
Audi S3AUL1999-2001External sensor needed
Golf IV GTIAUM/AUQ2002+Uses stock LSU 4.2 sensor
Skoda Octavia RSAUQ2000-2005Uses stock LSU 4.2 sensor
Seat LeonAMK/ARY/AUQ2002+Uses stock LSU 4.2 sensor
Seat LeonARY2000-2004Uses stock LSU 4.2 sensor
Seat LeonAJQ2001+Uses stock LSU 4.2 sensor
Audi TTAPX1999External sensor needed
Audi TTAPX/APP/AJQ2000+External sensor needed
Audi TTAUM/AUQ/ARY/BAM2002+Uses stock LSU 4.2 sensor
Audi A4BEX2002 - 2005Uses stock LSU 4.2 sensor

Vehicle and ECU functions

Manufacturer's mapping and availability for this particular adapter; a yes or no applies only to the configuration named in the table. Confirm adapter revision, hardware and calibration with the original guide.

OptionsOEM ECU PINMaxxECU IORACENote
E-Throttle117/118GPO 11/12Yes
Boost solenoid (OEM)104GPO 1Yes
VVT solenoid115GPO 2Yes
Electrical thermostat116GPO 3YesOnly on some models (A4, BEX)
Canister64GPO 4Yes
Fuel pump65GPO 5Yes
IAC cutoff valve105GPO 6Yes
Tachometer37GPO 8Yes
Main relay21INJ 5Yes
Error light47INJ 6YesAudi ME 7.5 CAN
Secondary air pump66INJ 7Yes
FAN (PWM controlled)24INJ 8YesOnly on some models (A4, BEX)
Knock sensors (OEM)106,107KNOCK1, KNOCK2Yes
Vehicle speed54DIN 1YesAlso from CAN, Audi ME 7.5 CAN
Clutch switch39DIN 2YES
EPC light48-CAN only!Audi ME 7.5 CAN
Intake air solenoid9-No
Instrument cluster/ABSAudi ME 7.5 CANYES
Traction buttonAudi ME 7.5 CANYES
Fuel consumption81-NoAudi ME 7.5 CAN
Bluetooth ( MDash)-Yes
EGT option-Yes, direct6 EGT direct in harness

Additional connector

The following is the extra connector table in the model-specific guide. Refer to its illustrated connector and installation notes for view, cable colours, electrical limits and revision; these positions are not the factory ECU connector.

PinDescriptionUsageNote
1 (H)+5V sensor supply
2 (G)Sensor GND
3 (F)TPS AIN0-5V analog inputTPS analog input can be used for external sensors, such as oil pressure, fuel pressure etc
4 (E)AIN 40-5V analog input
5 (D)DIN/VR 4Digital input
6 (C)DIN/VR 5Digital input
7 (B)--
8 (A)GPO 7 / DIN 3Output or digital input
9 (S)
10 (R)
11 (P)
12 (N)+12VOutput at ignition on
13 (M)Engine GND
14 (L)AIN 1temperature input
15 (K)AIN 2temperature input
16 (J)AIN 30-5V analog input

Installation and verification

The adapter may require an external wideband sensor, a MAP hose, additional connectors, or other changes depending on the application and kit. Do not assume that every factory function, emissions device, dashboard feature, air-conditioning function or transmission is supported. Check the model-specific tables, base configuration and full manufacturer installation guide for the exact unit before connection and calibration.

Documents

Sources reviewed 17 November 2026.