Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
MaxxECU standalone engine management
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None
MaxxECU Nissan S13 (CA18) plug-in kit
MaxxECU Nissan S13 (CA18) plug-in product image. Source: MaxxECU; used with permission. Illustrative kit; confirm included hardware for the particular package.

MaxxECU Nissan S13 (CA18) plug-in adapter connects a compatible MaxxECU to an application-specific factory wiring loom. It is an adapter and installation package rather than a new universal ECU architecture. The published MaxxECU application guide identifies its intended configuration and connector details.

Identification and scope

Match the vehicle, engine, original ECU and connector, transmission, adapter revision and the MaxxECU unit to the guide. GEN1 adapters and earlier V1-specific adapters are not automatically interchangeable. The manufacturer's GEN1 adapter index separates the vehicle-specific instructions.

Vehicle and ECU functions

Manufacturer's mapping and availability for this particular adapter; a yes or no applies only to the configuration named in the table. Confirm adapter revision, hardware and calibration with the original guide.

OEM optionsMaxxECU IOSTREETV1/RACE/PRO
Fuel pumpINJ 5YesYes
TachometerGPO 8YesYes
VCTGPO 3YesYes
Idle solenoidINJ 6YesYes
Boost solenoidGPO 1YesYes
Vehicle speedDIN 1YesYes
AC requestDIN 2YesYes
Error lightGPO 5NoYes
ACGPO 4NoYes
Bluetooth ( MDash)-NoYes
Knock sensor(s)-NoNo
EGT option-Yes, externalYes, direct

Additional connector

The following is the extra connector table in the model-specific guide. Refer to its illustrated connector and installation notes for view, cable colours, electrical limits and revision; these positions are not the factory ECU connector.

PinDescriptionUsageNote
1Wide band (VREF)
2Wide band (VS)
3Wide band (shield)
4Wide band (H-)
5GPO 7 / DIN 3Output or digital inputNot available on MaxxECU STREET
6GPO 6OutputNot available on MaxxECU STREET
7INJ 7OutputNot available on MaxxECU STREET
8INJ 8OutputNot available on MaxxECU STREET
9Wide band (IP)
10Wide band (RCAL)
11+12VOutput
12+12VOutput
13Engine GND
14AIN 1temperature input
15AIN 2temperature input
16AIN 30-5V analog input

Installation and verification

The adapter may require an external wideband sensor, a MAP hose, additional connectors, or other changes depending on the application and kit. Do not assume that every factory function, emissions device, dashboard feature, air-conditioning function or transmission is supported. Check the model-specific tables, base configuration and full manufacturer installation guide for the exact unit before connection and calibration.

Documents

Sources reviewed 17 November 2026.