Removed text is struck through; added text is highlighted.
MaxxECU Audi S2/S4/S6 (AAN) plug-in product image. Source: MaxxECU; used with permission. Illustrative kit; confirm included hardware for the particular package.
MaxxECU Audi S2/S4/S6 (AAN) plug-in adapter connects a compatible MaxxECU to an application-specific factory wiring loom. It is an adapter and installation package rather than a new universal ECU architecture. The published MaxxECU application guide identifies its intended configuration and connector details.
Identification and scope
Match the vehicle, engine, original ECU and connector, transmission, adapter revision and the MaxxECU unit to the guide. GEN1 adapters and earlier V1-specific adapters are not automatically interchangeable. The manufacturer's GEN1 adapter index separates the vehicle-specific instructions.
Manufacturer-listed examples
These examples and qualifications are transcribed from the manufacturer's adapter guide. A listed platform is not proof that every market or hardware combination is compatible; check the exact ECU, loom and transmission.
VehicleEngine codeYearLSU sensorNoteAudi S2ABY1993 - 1996External sensor neededAudi S4 (C4)AAN1991 - 1994External sensor neededNo support for the V8 engine, check your engine codeAudi S6 (C4)AAN1995 - 1997External sensor neededNo support for the V8 engine, check your engine codeAudi RS2ADU1994 - 1996External sensor needed
Vehicle and ECU functions
Manufacturer's mapping and availability for this particular adapter; a yes or no applies only to the configuration named in the table. Confirm adapter revision, hardware and calibration with the original guide.
OEM optionsMaxxECU IOSTREETV1/RACE/PRONoteFuel pumpGPO 1YesYesTachometerGPO 8YesYesCheck engine lightGPO 3YesYesIdle solenoidINJ 6YesYesBoost solenoidGPO 2YesYesEngine fanVehicle controlYesYesVehicle speedDIN 2YesYesAC-NoNoAC request-NoNoEVAP solenoid-NoNoStock EVAP is not controlledBluetooth ( MDash)-NoYesKnock sensor(s)-NoNoEGT option-Yes, externalYes, direct
Additional connector
The following is the extra connector table in the model-specific guide. Refer to its illustrated connector and installation notes for view, cable colours, electrical limits and revision; these positions are not the factory ECU connector.
PinDescriptionUsageNote1Wide band (VREF)2Wide band (VS)3Wide band (shield)4Wide band (H-)5INJ 7OutputNot available on MaxxECU STREET6INJ 8OutputNot available on MaxxECU STREET7GPO 7Output or digital inputNot available on MaxxECU STREET8GPO 4OutputNot available on MaxxECU STREET9Wide band (IP)10Wide band (RCAL)11+12VOutput12+12VOutput13Engine GND14AIN 1temperature input15AIN 2temperature input16AIN 30-5V analog input
Installation and verification
The adapter may require an external wideband sensor, a MAP hose, additional connectors, or other changes depending on the application and kit. Do not assume that every factory function, emissions device, dashboard feature, air-conditioning function or transmission is supported. Check the model-specific tables, base configuration and full manufacturer installation guide for the exact unit before connection and calibration.
Documents
MaxxECU Audi S2/S4/S6 (AAN) adapter installation and pinoutGEN1 plug-in compatibility and wiring indexMaxxECU manufacturer and universal-model index
Sources reviewed 17 November 2026.
Rendered revisions
Open each version to inspect formatting, tables and photographs.
Revision 2: MaxxECU Audi S2/S4/S6 (AAN) plug-in adapterMaxxECU Audi S2/S4/S6 (AAN) plug-in product image. Source: MaxxECU; used with permission. Illustrative kit; confirm included hardware for the particular package.
MaxxECU Audi S2/S4/S6 (AAN) plug-in adapter connects a compatible MaxxECU to an application-specific factory wiring loom. It is an adapter and installation package rather than a new universal ECU architecture. The published MaxxECU application guide identifies its intended configuration and connector details.
Identification and scope
Match the vehicle, engine, original ECU and connector, transmission, adapter revision and the MaxxECU unit to the guide. GEN1 adapters and earlier V1-specific adapters are not automatically interchangeable. The manufacturer's GEN1 adapter index separates the vehicle-specific instructions.
Manufacturer-listed examples
These examples and qualifications are transcribed from the manufacturer's adapter guide. A listed platform is not proof that every market or hardware combination is compatible; check the exact ECU, loom and transmission.
Vehicle
Engine code
Year
LSU sensor
Note
Audi S2
ABY
1993 - 1996
External sensor needed
Audi S4 (C4)
AAN
1991 - 1994
External sensor needed
No support for the V8 engine, check your engine code
Audi S6 (C4)
AAN
1995 - 1997
External sensor needed
No support for the V8 engine, check your engine code
Audi RS2
ADU
1994 - 1996
External sensor needed
Vehicle and ECU functions
Manufacturer's mapping and availability for this particular adapter; a yes or no applies only to the configuration named in the table. Confirm adapter revision, hardware and calibration with the original guide.
OEM options
MaxxECU IO
STREET
V1/RACE/PRO
Note
Fuel pump
GPO 1
Yes
Yes
Tachometer
GPO 8
Yes
Yes
Check engine light
GPO 3
Yes
Yes
Idle solenoid
INJ 6
Yes
Yes
Boost solenoid
GPO 2
Yes
Yes
Engine fan
Vehicle control
Yes
Yes
Vehicle speed
DIN 2
Yes
Yes
AC
-
No
No
AC request
-
No
No
EVAP solenoid
-
No
No
Stock EVAP is not controlled
Bluetooth ( MDash)
-
No
Yes
Knock sensor(s)
-
No
No
EGT option
-
Yes, external
Yes, direct
Additional connector
The following is the extra connector table in the model-specific guide. Refer to its illustrated connector and installation notes for view, cable colours, electrical limits and revision; these positions are not the factory ECU connector.
Pin
Description
Usage
Note
1
Wide band (VREF)
2
Wide band (VS)
3
Wide band (shield)
4
Wide band (H-)
5
INJ 7
Output
Not available on MaxxECU STREET
6
INJ 8
Output
Not available on MaxxECU STREET
7
GPO 7
Output or digital input
Not available on MaxxECU STREET
8
GPO 4
Output
Not available on MaxxECU STREET
9
Wide band (IP)
10
Wide band (RCAL)
11
+12V
Output
12
+12V
Output
13
Engine GND
14
AIN 1
temperature input
15
AIN 2
temperature input
16
AIN 3
0-5V analog input
Installation and verification
The adapter may require an external wideband sensor, a MAP hose, additional connectors, or other changes depending on the application and kit. Do not assume that every factory function, emissions device, dashboard feature, air-conditioning function or transmission is supported. Check the model-specific tables, base configuration and full manufacturer installation guide for the exact unit before connection and calibration.
Revision 2: MaxxECU Audi S2/S4/S6 (AAN) plug-in adapterMaxxECU Audi S2/S4/S6 (AAN) plug-in product image. Source: MaxxECU; used with permission. Illustrative kit; confirm included hardware for the particular package.
MaxxECU Audi S2/S4/S6 (AAN) plug-in adapter connects a compatible MaxxECU to an application-specific factory wiring loom. It is an adapter and installation package rather than a new universal ECU architecture. The published MaxxECU application guide identifies its intended configuration and connector details.
Identification and scope
Match the vehicle, engine, original ECU and connector, transmission, adapter revision and the MaxxECU unit to the guide. GEN1 adapters and earlier V1-specific adapters are not automatically interchangeable. The manufacturer's GEN1 adapter index separates the vehicle-specific instructions.
Manufacturer-listed examples
These examples and qualifications are transcribed from the manufacturer's adapter guide. A listed platform is not proof that every market or hardware combination is compatible; check the exact ECU, loom and transmission.
Vehicle
Engine code
Year
LSU sensor
Note
Audi S2
ABY
1993 - 1996
External sensor needed
Audi S4 (C4)
AAN
1991 - 1994
External sensor needed
No support for the V8 engine, check your engine code
Audi S6 (C4)
AAN
1995 - 1997
External sensor needed
No support for the V8 engine, check your engine code
Audi RS2
ADU
1994 - 1996
External sensor needed
Vehicle and ECU functions
Manufacturer's mapping and availability for this particular adapter; a yes or no applies only to the configuration named in the table. Confirm adapter revision, hardware and calibration with the original guide.
OEM options
MaxxECU IO
STREET
V1/RACE/PRO
Note
Fuel pump
GPO 1
Yes
Yes
Tachometer
GPO 8
Yes
Yes
Check engine light
GPO 3
Yes
Yes
Idle solenoid
INJ 6
Yes
Yes
Boost solenoid
GPO 2
Yes
Yes
Engine fan
Vehicle control
Yes
Yes
Vehicle speed
DIN 2
Yes
Yes
AC
-
No
No
AC request
-
No
No
EVAP solenoid
-
No
No
Stock EVAP is not controlled
Bluetooth ( MDash)
-
No
Yes
Knock sensor(s)
-
No
No
EGT option
-
Yes, external
Yes, direct
Additional connector
The following is the extra connector table in the model-specific guide. Refer to its illustrated connector and installation notes for view, cable colours, electrical limits and revision; these positions are not the factory ECU connector.
Pin
Description
Usage
Note
1
Wide band (VREF)
2
Wide band (VS)
3
Wide band (shield)
4
Wide band (H-)
5
INJ 7
Output
Not available on MaxxECU STREET
6
INJ 8
Output
Not available on MaxxECU STREET
7
GPO 7
Output or digital input
Not available on MaxxECU STREET
8
GPO 4
Output
Not available on MaxxECU STREET
9
Wide band (IP)
10
Wide band (RCAL)
11
+12V
Output
12
+12V
Output
13
Engine GND
14
AIN 1
temperature input
15
AIN 2
temperature input
16
AIN 3
0-5V analog input
Installation and verification
The adapter may require an external wideband sensor, a MAP hose, additional connectors, or other changes depending on the application and kit. Do not assume that every factory function, emissions device, dashboard feature, air-conditioning function or transmission is supported. Check the model-specific tables, base configuration and full manufacturer installation guide for the exact unit before connection and calibration.