Page organisation in this revision
- Page type
- Reference hub
- Subject
- Engine ECU
- Parent
- Link standalone ECUs
- Applies to
- No ECU-specific applicability
- Tool groups
- None
- Manufacturers
- None
Changes from revision 1 to revision 2
Removed text is struck through; added text is highlighted.
Link G1 LEM V4 is a documented G1 Link engine-management designation. Link lists LEM V4 as supported by legacy PCLink V2.5 for G1 ECUs. G1 is an earlier platform than G2/G3 and G4; retain the V4 revision in identification. Identification source.
Identification and software
Record the complete model and revision label, board identifiers, installed firmware, connector configuration and any adapter loom. Similar Link model names occur in later generations. Use the manufacturer's legacy PCLink compatibility table and seek Link support if the appropriate package is unclear.
Model-specific wiring
The identified manufacturer documentation or legacy manual archive is the starting point for this model. An individual pin-by-pin allocation was not verified in this reference; obtain the exact matching manual and connector orientation before wiring.
See Link standalone ECUs for related models and generation distinctions.
V4 loom identification evidenceIn a Link staff discussion of LEM V4, AUX1 / RPM switch is identified as brown/white for the discussed boost-control installation. This is a loom-colour identification, not a verified connector cavity; identify the exact unit, configuration and wiring before applying it. The staff specifically distinguished the LEM manual from the LinkPlus manual.
Rendered revisions
Open each version to inspect formatting, tables and photographs.
Revision 1: Link G1 LEM V4
Link G1 LEM V4 is a documented G1 Link engine-management designation. Link lists LEM V4 as supported by legacy PCLink V2.5 for G1 ECUs. G1 is an earlier platform than G2/G3 and G4; retain the V4 revision in identification. Identification source.
Identification and software
Record the complete model and revision label, board identifiers, installed firmware, connector configuration and any adapter loom. Similar Link model names occur in later generations. Use the manufacturer's legacy PCLink compatibility table and seek Link support if the appropriate package is unclear.
Model-specific wiring
The identified manufacturer documentation or legacy manual archive is the starting point for this model. An individual pin-by-pin allocation was not verified in this reference; obtain the exact matching manual and connector orientation before wiring.
See Link standalone ECUs for related models and generation distinctions.
Revision 2: Link G1 LEM V4
Link G1 LEM V4 is a documented G1 Link engine-management designation. Link lists LEM V4 as supported by legacy PCLink V2.5 for G1 ECUs. G1 is an earlier platform than G2/G3 and G4; retain the V4 revision in identification. Identification source.
Identification and software
Record the complete model and revision label, board identifiers, installed firmware, connector configuration and any adapter loom. Similar Link model names occur in later generations. Use the manufacturer's legacy PCLink compatibility table and seek Link support if the appropriate package is unclear.
Model-specific wiring
The identified manufacturer documentation or legacy manual archive is the starting point for this model. An individual pin-by-pin allocation was not verified in this reference; obtain the exact matching manual and connector orientation before wiring.
See Link standalone ECUs for related models and generation distinctions.
V4 loom identification evidence
In a Link staff discussion of LEM V4, AUX1 / RPM switch is identified as brown/white for the discussed boost-control installation. This is a loom-colour identification, not a verified connector cavity; identify the exact unit, configuration and wiring before applying it. The staff specifically distinguished the LEM manual from the LinkPlus manual.