Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
MaxxECU standalone engine management
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

Changes from revision 1 to revision 2

Removed text is struck through; added text is highlighted.

MaxxECU GEN2 TRACK, one compatible ECU; the vehicle-specific adapter is separate and is not shown. Image: MaxxECU; reproduced with permission.

MaxxECU Volvo S60 ME 7.0 GEN2 plug-in adapter joins a compatible GEN2 ECU to a specified factory engine harness. This is a vehicle-specific adapter system, not a different universal ECU model. Manufacturer's installation guide.

Applicability

The manufacturer specifies GEN2 TRACK or RACE, Volvo ME 7.0, and a 2004 S60 2.5T example, manual transmission only. It calls for a separate OEM ECU removal tool and lists a dedicated Volvo ME 7.0 CAN mode. Check the exact vehicle, engine, ECU number, harness and hardware revision against the manufacturer guide before purchasing or installing.

Manufacturer's function mapping

These assignments are specific to the documented GEN2 adapter and ECU configuration, not a universal vehicle pinout. Confirm calibration, connector face and configuration in the source.

OptionsOEM ECU PINMaxxECU IOGEN2 TRACKGEN2 RACENote5 injection sequentialA16, A34, A15, A33, A14INJ 1-5YESYES5 ignition sequentialA30,A31,A50,A51,A52IGN 1-5YESYESFAN (PWM)A7GPO 1 (LOW)YESYESFuel pump relayB45GPO 2 (LOW)YESYESFuel pump PWMB47GPO 3 (LOW)YESYESS60R onlyStarter relayB23GPO 4 (GND)YESYESIntake VVTi solenoidA13GPO 5 (LOW)YESYESExhaust VVTi solenoidA21GPO 6 (LOW)YESYESDME relay controlB38GPO 7 (GND)YESYESEVAP PurgeA9GPO 8 (LOW)YESYESLambda sensor (LSU 4.2)IGN 6 (H-)YESYESAC magnetic clutchB44IGN 7 (GND)YESYESCheck engine light (CEL)B46IGN 8 (GND)YESYESCooling fan relayB48INJ 7 (GND)YESYESBoost solenoidA38INJ 6 (GND)YESYESE-Throttle with cruise controlA35, A36GPO 13/ GPO 14YESYESCoolant sensorA4AIN 1YESYESIntake temp sensorA5AIN 2YESYESThrottle positionA1, A20AIN3, AIN4YESYESFuel pressure signalA2AIN 6YESYESFuel temp signalA3AIN 7YESYESClutch positionB15AIN 9YESYESBrake lightB26DIN 10YESYESOutside tempB29AIN 11YESYESOil pressure switchA26DIN 12YESYESAC pressure sensorA68AIN 13YESYESCoolant level sensorB8AIN 14YESYESCrank triggerA48PULSE1YESYESIntake CAM triggerA47PULSE2YESYESExhaust CAM triggerA27PULSE3YESYESPedal positionB25, B17PULSE4, DIN5YESYESOEM knock sensorsA46, A45KNOCK1, KNOCK2YESYESKEY INB3712V KEY ONYESYESConstant power to charge tabletB1112V CONSTANTYESYESOEM mass air mass sensorNONOControl signal, leak diagnostic unitB7, B40NONODiagnostic C-linkB22NONOIntstrument clusterVolvo ME 7.0 (500kbit)EGT connectorsNONO**Requires harness 4Bluetooth ( MDash)YESYES

Additional connector

The model-specific guide provides the following extra connector positions. Check its drawing for the view and pin labels; available outputs differ between TRACK and RACE.

PinDescriptionUsageNoteGEN2 TRACKGEN2 RACE1 (H)Engine GNDYESYES2 (G)+12V MAINMain DME relay powerYESYES3 (F)GP OUT 15 (H-BRIDGE 2)YESYES4 (E)GP OUT 16 (H-BRIDGE 2)YESYES5 (D)IGNITION 10NOYES6 (C)IGNITION 11NOYES7 (B)IGNITION 9NOYES8 (A)INJECTOR 8YESYES9 (S)AIN/DIN 8Analog / digital inputYESYES10 (R)AIN/DIN 16Analog / digital inputYESYES11 (P)AIN/DIN 17Analog / digital inputNOYES12 (N)AIN/DIN 18Analog / digital inputNOYES13 (M)AIN/DIN 19Analog / digital inputNOYES14 (L)AIN/DIN 20Analog / digital inputNOYES15 (K)+5V sensor supplyYESYES16 (J)Sensor GNDYESYES

Documents and wiring

See the exact adapter and pinout guide for additional connectors, wideband wiring, power feeds, fuses and any limitations. The GEN2 plug-in index and MaxxECU family reference cover other hardware and applications. Review firmware and functions for the specific setup.

Source reviewed 17 November 2026.

Rendered revisions

Open each version to inspect formatting, tables and photographs.

Revision 1: MaxxECU GEN2 Volvo S60 ME 7.0 plug-in adapter

MaxxECU Volvo S60 ME 7.0 GEN2 plug-in adapter joins a compatible GEN2 ECU to a specified factory engine harness. This is a vehicle-specific adapter system, not a different universal ECU model. Manufacturer's installation guide.

Applicability

The manufacturer specifies GEN2 TRACK or RACE, Volvo ME 7.0, and a 2004 S60 2.5T example, manual transmission only. It calls for a separate OEM ECU removal tool and lists a dedicated Volvo ME 7.0 CAN mode. Check the exact vehicle, engine, ECU number, harness and hardware revision against the manufacturer guide before purchasing or installing.

Manufacturer's function mapping

These assignments are specific to the documented GEN2 adapter and ECU configuration, not a universal vehicle pinout. Confirm calibration, connector face and configuration in the source.

OptionsOEM ECU PINMaxxECU IOGEN2 TRACKGEN2 RACENote
5 injection sequentialA16, A34, A15, A33, A14INJ 1-5YESYES
5 ignition sequentialA30,A31,A50,A51,A52IGN 1-5YESYES
FAN (PWM)A7GPO 1 (LOW)YESYES
Fuel pump relayB45GPO 2 (LOW)YESYES
Fuel pump PWMB47GPO 3 (LOW)YESYESS60R only
Starter relayB23GPO 4 (GND)YESYES
Intake VVTi solenoidA13GPO 5 (LOW)YESYES
Exhaust VVTi solenoidA21GPO 6 (LOW)YESYES
DME relay controlB38GPO 7 (GND)YESYES
EVAP PurgeA9GPO 8 (LOW)YESYES
Lambda sensor (LSU 4.2)IGN 6 (H-)YESYES
AC magnetic clutchB44IGN 7 (GND)YESYES
Check engine light (CEL)B46IGN 8 (GND)YESYES
Cooling fan relayB48INJ 7 (GND)YESYES
Boost solenoidA38INJ 6 (GND)YESYES
E-Throttle with cruise controlA35, A36GPO 13/ GPO 14YESYES
Coolant sensorA4AIN 1YESYES
Intake temp sensorA5AIN 2YESYES
Throttle positionA1, A20AIN3, AIN4YESYES
Fuel pressure signalA2AIN 6YESYES
Fuel temp signalA3AIN 7YESYES
Clutch positionB15AIN 9YESYES
Brake lightB26DIN 10YESYES
Outside tempB29AIN 11YESYES
Oil pressure switchA26DIN 12YESYES
AC pressure sensorA68AIN 13YESYES
Coolant level sensorB8AIN 14YESYES
Crank triggerA48PULSE1YESYES
Intake CAM triggerA47PULSE2YESYES
Exhaust CAM triggerA27PULSE3YESYES
Pedal positionB25, B17PULSE4, DIN5YESYES
OEM knock sensorsA46, A45KNOCK1, KNOCK2YESYES
KEY INB3712V KEY ONYESYES
Constant power to charge tabletB1112V CONSTANTYESYES
OEM mass air mass sensorNONO
Control signal, leak diagnostic unitB7, B40NONO
Diagnostic C-linkB22NONO
Intstrument clusterVolvo ME 7.0 (500kbit)
EGT connectorsNONO**Requires harness 4
Bluetooth ( MDash)YESYES

Additional connector

The model-specific guide provides the following extra connector positions. Check its drawing for the view and pin labels; available outputs differ between TRACK and RACE.

PinDescriptionUsageNoteGEN2 TRACKGEN2 RACE
1 (H)Engine GNDYESYES
2 (G)+12V MAINMain DME relay powerYESYES
3 (F)GP OUT 15 (H-BRIDGE 2)YESYES
4 (E)GP OUT 16 (H-BRIDGE 2)YESYES
5 (D)IGNITION 10NOYES
6 (C)IGNITION 11NOYES
7 (B)IGNITION 9NOYES
8 (A)INJECTOR 8YESYES
9 (S)AIN/DIN 8Analog / digital inputYESYES
10 (R)AIN/DIN 16Analog / digital inputYESYES
11 (P)AIN/DIN 17Analog / digital inputNOYES
12 (N)AIN/DIN 18Analog / digital inputNOYES
13 (M)AIN/DIN 19Analog / digital inputNOYES
14 (L)AIN/DIN 20Analog / digital inputNOYES
15 (K)+5V sensor supplyYESYES
16 (J)Sensor GNDYESYES

Documents and wiring

See the exact adapter and pinout guide for additional connectors, wideband wiring, power feeds, fuses and any limitations. The GEN2 plug-in index and MaxxECU family reference cover other hardware and applications. Review firmware and functions for the specific setup.

Source reviewed 17 November 2026.

Revision 2: MaxxECU GEN2 Volvo S60 ME 7.0 plug-in adapter
MaxxECU GEN2 TRACK ECU compatible with the documented Volvo adapter
MaxxECU GEN2 TRACK, one compatible ECU; the vehicle-specific adapter is separate and is not shown. Image: MaxxECU; reproduced with permission.

MaxxECU Volvo S60 ME 7.0 GEN2 plug-in adapter joins a compatible GEN2 ECU to a specified factory engine harness. This is a vehicle-specific adapter system, not a different universal ECU model. Manufacturer's installation guide.

Applicability

The manufacturer specifies GEN2 TRACK or RACE, Volvo ME 7.0, and a 2004 S60 2.5T example, manual transmission only. It calls for a separate OEM ECU removal tool and lists a dedicated Volvo ME 7.0 CAN mode. Check the exact vehicle, engine, ECU number, harness and hardware revision against the manufacturer guide before purchasing or installing.

Manufacturer's function mapping

These assignments are specific to the documented GEN2 adapter and ECU configuration, not a universal vehicle pinout. Confirm calibration, connector face and configuration in the source.

OptionsOEM ECU PINMaxxECU IOGEN2 TRACKGEN2 RACENote
5 injection sequentialA16, A34, A15, A33, A14INJ 1-5YESYES
5 ignition sequentialA30,A31,A50,A51,A52IGN 1-5YESYES
FAN (PWM)A7GPO 1 (LOW)YESYES
Fuel pump relayB45GPO 2 (LOW)YESYES
Fuel pump PWMB47GPO 3 (LOW)YESYESS60R only
Starter relayB23GPO 4 (GND)YESYES
Intake VVTi solenoidA13GPO 5 (LOW)YESYES
Exhaust VVTi solenoidA21GPO 6 (LOW)YESYES
DME relay controlB38GPO 7 (GND)YESYES
EVAP PurgeA9GPO 8 (LOW)YESYES
Lambda sensor (LSU 4.2)IGN 6 (H-)YESYES
AC magnetic clutchB44IGN 7 (GND)YESYES
Check engine light (CEL)B46IGN 8 (GND)YESYES
Cooling fan relayB48INJ 7 (GND)YESYES
Boost solenoidA38INJ 6 (GND)YESYES
E-Throttle with cruise controlA35, A36GPO 13/ GPO 14YESYES
Coolant sensorA4AIN 1YESYES
Intake temp sensorA5AIN 2YESYES
Throttle positionA1, A20AIN3, AIN4YESYES
Fuel pressure signalA2AIN 6YESYES
Fuel temp signalA3AIN 7YESYES
Clutch positionB15AIN 9YESYES
Brake lightB26DIN 10YESYES
Outside tempB29AIN 11YESYES
Oil pressure switchA26DIN 12YESYES
AC pressure sensorA68AIN 13YESYES
Coolant level sensorB8AIN 14YESYES
Crank triggerA48PULSE1YESYES
Intake CAM triggerA47PULSE2YESYES
Exhaust CAM triggerA27PULSE3YESYES
Pedal positionB25, B17PULSE4, DIN5YESYES
OEM knock sensorsA46, A45KNOCK1, KNOCK2YESYES
KEY INB3712V KEY ONYESYES
Constant power to charge tabletB1112V CONSTANTYESYES
OEM mass air mass sensorNONO
Control signal, leak diagnostic unitB7, B40NONO
Diagnostic C-linkB22NONO
Intstrument clusterVolvo ME 7.0 (500kbit)
EGT connectorsNONO**Requires harness 4
Bluetooth ( MDash)YESYES

Additional connector

The model-specific guide provides the following extra connector positions. Check its drawing for the view and pin labels; available outputs differ between TRACK and RACE.

PinDescriptionUsageNoteGEN2 TRACKGEN2 RACE
1 (H)Engine GNDYESYES
2 (G)+12V MAINMain DME relay powerYESYES
3 (F)GP OUT 15 (H-BRIDGE 2)YESYES
4 (E)GP OUT 16 (H-BRIDGE 2)YESYES
5 (D)IGNITION 10NOYES
6 (C)IGNITION 11NOYES
7 (B)IGNITION 9NOYES
8 (A)INJECTOR 8YESYES
9 (S)AIN/DIN 8Analog / digital inputYESYES
10 (R)AIN/DIN 16Analog / digital inputYESYES
11 (P)AIN/DIN 17Analog / digital inputNOYES
12 (N)AIN/DIN 18Analog / digital inputNOYES
13 (M)AIN/DIN 19Analog / digital inputNOYES
14 (L)AIN/DIN 20Analog / digital inputNOYES
15 (K)+5V sensor supplyYESYES
16 (J)Sensor GNDYESYES

Documents and wiring

See the exact adapter and pinout guide for additional connectors, wideband wiring, power feeds, fuses and any limitations. The GEN2 plug-in index and MaxxECU family reference cover other hardware and applications. Review firmware and functions for the specific setup.

Source reviewed 17 November 2026.