Removed text is struck through; added text is highlighted.
Example GEN2 RACE BMW M54 kit. Image: MaxxECU; used with permission. Other ECU and sensor packages differ.
MaxxECU BMW M54 MS42 MS43 GEN2 plug-in adapter joins a compatible GEN2 ECU to a specified factory engine harness. This is a vehicle-specific adapter system, not a different universal ECU model. Manufacturer's installation guide.
Applicability
MaxxECU identifies a GEN2 TRACK/RACE adapter for documented MS42/MS43 applications and explicitly excludes MS45. Its guide states manual transmission only; some vehicle combinations are marked unverified. Confirm exact engine, original ECU and connector, as source tables group several engine capacities. Check the exact vehicle, engine, ECU number, harness and hardware revision against the manufacturer guide before purchasing or installing.
Manufacturer's function mapping
These assignments are specific to the documented GEN2 adapter and ECU configuration, not a universal vehicle pinout. Confirm calibration, connector face and configuration in the source.
OptionsOEM ECU PINMaxxECU IOGEN2 TRACKGEN2 RACENote6 injection sequentialC33, C34, C35, C36, C37, C38INJ 1-6YESYES6 ignition sequential (using IGBT)E3, E2, E1, E9, E8, E7IGN 1-6YESYESFuel pumpD10GPO 1YESYESThermostatC45GPO 2YESYESFAN (PWM)D4GPO 3YESYESECU relay activationB23GPO 4YESYESVANOS solenoid (exhaust)C41GPO 5YESYESVANOS solenoid (intake)C40GPO 6YESYESLambda heater-GPO 7YESYESFuel tank vent valveC42GPO 8YESYESE-Throttle with cruise controlC44, C43GPO 13/GPO 14YESYESIdle solenoid (MS42 only)C46, C47IGN 7/8YESYESNot used for idle features using our base tune, but it is still wired...DISA (intake)C49INJ 7YESYESAC magnetic clutch*D29INJ 8YESYESParallel to OEM A/C clutch (D29). Disconnect A/C to use as a general output.OEM knock sensorsC29, C31KNOCK1, KNOCK2YESYESExhaust flapD18Yes, no ctrlYes, no ctrlOnly available on M54B30, this output is always active (no control option available)External boost solenoidGPO 9 (12V)YESYESCrank triggerC8PULSE 1YESYESIntake CAM triggerC5PULSE 2YESYESExhaust CAM triggerC2PULSE 3YESYESBMW Steering wheel buttonsD27PULSE 4YESYESOE coolant temperature sensor (CLT)C24AIN 1YESYESOE intake air temperature sensor (IAT)C22AIN 2YESYESOE throttle position sensor (main)C19AIN 3YESYESOE throttle position sensor (backup)C10AIN 4YESYESOE engine oil temperature sensorC27AIN 5YESYESNo calibration available for this sensor.OE Coolant outlet temperatureD39AIN 6YESYESOE pedal sensor (main)D13 + C16 (MS42)AIN 7YESYESOE pedal sensor (backup)D8 + C9 (MS42)AIN 8YESYESOE clutch switchD23AIN 9YESYESBrake switchBMW E46 330i (MS43) CANSecondary air pump--Wideband lambda sensorUsing external harness (included)OE mass air mass flow sensor--NONOOil pressure switchC26 (MS43) / D11 (MS42)NONOOil level switch (MS42 only)C39NONOInstrument clusterBMW E46 330i (MS43) CANBluetooth ( MDash)EGT optionNOYes
Additional connector
The model-specific guide provides the following extra connector positions. Check its drawing for the view and pin labels; available outputs differ between TRACK and RACE.
PinGEN2 TRACKGEN2 RACEUsageNote1+5V sensor supply+5V sensor supplyPower source for external sensors2Sensor GNDSensor GNDSensor ground for external sensors3AIN 10AIN 100-5V analog input4AIN 11AIN 110-5V analog input5AIN 12AIN 120-5V analog input6PULSE5+AIN 177+12V switched+12V switchedBattery positive (+12V)Output at ignition on8INJ 8INJ 8OutputParallel to OEM A/C clutch (D29). Disconnect A/C to use as a general output.9GPO 10 (+12V)GPO 10 (+12V)Output10GPO 11 (+12V)GPO 11 (+12V)Output11CAN2 LAIN 20Different function depending on used MaxxECU12CAN2 HAIN 21Different function depending on used MaxxECU
Documents and wiring
See the exact adapter and pinout guide for additional connectors, wideband wiring, power feeds, fuses and any limitations. The GEN2 plug-in index and MaxxECU family reference cover other hardware and applications. Review firmware and functions for the specific setup.
Source reviewed 17 November 2026.
Rendered revisions
Open each version to inspect formatting, tables and photographs.
Revision 1: MaxxECU GEN2 BMW M54 MS42 MS43 plug-in adapter
MaxxECU BMW M54 MS42 MS43 GEN2 plug-in adapter joins a compatible GEN2 ECU to a specified factory engine harness. This is a vehicle-specific adapter system, not a different universal ECU model. Manufacturer's installation guide.
Applicability
MaxxECU identifies a GEN2 TRACK/RACE adapter for documented MS42/MS43 applications and explicitly excludes MS45. Its guide states manual transmission only; some vehicle combinations are marked unverified. Confirm exact engine, original ECU and connector, as source tables group several engine capacities. Check the exact vehicle, engine, ECU number, harness and hardware revision against the manufacturer guide before purchasing or installing.
Manufacturer's function mapping
These assignments are specific to the documented GEN2 adapter and ECU configuration, not a universal vehicle pinout. Confirm calibration, connector face and configuration in the source.
Options
OEM ECU PIN
MaxxECU IO
GEN2 TRACK
GEN2 RACE
Note
6 injection sequential
C33, C34, C35, C36, C37, C38
INJ 1-6
YES
YES
6 ignition sequential (using IGBT)
E3, E2, E1, E9, E8, E7
IGN 1-6
YES
YES
Fuel pump
D10
GPO 1
YES
YES
Thermostat
C45
GPO 2
YES
YES
FAN (PWM)
D4
GPO 3
YES
YES
ECU relay activation
B23
GPO 4
YES
YES
VANOS solenoid (exhaust)
C41
GPO 5
YES
YES
VANOS solenoid (intake)
C40
GPO 6
YES
YES
Lambda heater-
GPO 7
YES
YES
Fuel tank vent valve
C42
GPO 8
YES
YES
E-Throttle with cruise control
C44, C43
GPO 13/GPO 14
YES
YES
Idle solenoid (MS42 only)
C46, C47
IGN 7/8
YES
YES
Not used for idle features using our base tune, but it is still wired...
DISA (intake)
C49
INJ 7
YES
YES
AC magnetic clutch*
D29
INJ 8
YES
YES
Parallel to OEM A/C clutch (D29). Disconnect A/C to use as a general output.
OEM knock sensors
C29, C31
KNOCK1, KNOCK2
YES
YES
Exhaust flap
D18
Yes, no ctrl
Yes, no ctrl
Only available on M54B30, this output is always active (no control option available)
External boost solenoid
GPO 9 (12V)
YES
YES
Crank trigger
C8
PULSE 1
YES
YES
Intake CAM trigger
C5
PULSE 2
YES
YES
Exhaust CAM trigger
C2
PULSE 3
YES
YES
BMW Steering wheel buttons
D27
PULSE 4
YES
YES
OE coolant temperature sensor (CLT)
C24
AIN 1
YES
YES
OE intake air temperature sensor (IAT)
C22
AIN 2
YES
YES
OE throttle position sensor (main)
C19
AIN 3
YES
YES
OE throttle position sensor (backup)
C10
AIN 4
YES
YES
OE engine oil temperature sensor
C27
AIN 5
YES
YES
No calibration available for this sensor.
OE Coolant outlet temperature
D39
AIN 6
YES
YES
OE pedal sensor (main)
D13 + C16 (MS42)
AIN 7
YES
YES
OE pedal sensor (backup)
D8 + C9 (MS42)
AIN 8
YES
YES
OE clutch switch
D23
AIN 9
YES
YES
Brake switch
BMW E46 330i (MS43) CAN
Secondary air pump
-
-
Wideband lambda sensor
Using external harness (included)
OE mass air mass flow sensor
-
-
NO
NO
Oil pressure switch
C26 (MS43) / D11 (MS42)
NO
NO
Oil level switch (MS42 only)
C39
NO
NO
Instrument cluster
BMW E46 330i (MS43) CAN
Bluetooth ( MDash)
EGT option
NO
Yes
Additional connector
The model-specific guide provides the following extra connector positions. Check its drawing for the view and pin labels; available outputs differ between TRACK and RACE.
Pin
GEN2 TRACK
GEN2 RACE
Usage
Note
1
+5V sensor supply
+5V sensor supply
Power source for external sensors
2
Sensor GND
Sensor GND
Sensor ground for external sensors
3
AIN 10
AIN 10
0-5V analog input
4
AIN 11
AIN 11
0-5V analog input
5
AIN 12
AIN 12
0-5V analog input
6
PULSE5+
AIN 17
7
+12V switched
+12V switched
Battery positive (+12V)
Output at ignition on
8
INJ 8
INJ 8
Output
Parallel to OEM A/C clutch (D29). Disconnect A/C to use as a general output.
Revision 2: MaxxECU GEN2 BMW M54 MS42 MS43 plug-in adapterExample GEN2 RACE BMW M54 kit. Image: MaxxECU; used with permission. Other ECU and sensor packages differ.
MaxxECU BMW M54 MS42 MS43 GEN2 plug-in adapter joins a compatible GEN2 ECU to a specified factory engine harness. This is a vehicle-specific adapter system, not a different universal ECU model. Manufacturer's installation guide.
Applicability
MaxxECU identifies a GEN2 TRACK/RACE adapter for documented MS42/MS43 applications and explicitly excludes MS45. Its guide states manual transmission only; some vehicle combinations are marked unverified. Confirm exact engine, original ECU and connector, as source tables group several engine capacities. Check the exact vehicle, engine, ECU number, harness and hardware revision against the manufacturer guide before purchasing or installing.
Manufacturer's function mapping
These assignments are specific to the documented GEN2 adapter and ECU configuration, not a universal vehicle pinout. Confirm calibration, connector face and configuration in the source.
Options
OEM ECU PIN
MaxxECU IO
GEN2 TRACK
GEN2 RACE
Note
6 injection sequential
C33, C34, C35, C36, C37, C38
INJ 1-6
YES
YES
6 ignition sequential (using IGBT)
E3, E2, E1, E9, E8, E7
IGN 1-6
YES
YES
Fuel pump
D10
GPO 1
YES
YES
Thermostat
C45
GPO 2
YES
YES
FAN (PWM)
D4
GPO 3
YES
YES
ECU relay activation
B23
GPO 4
YES
YES
VANOS solenoid (exhaust)
C41
GPO 5
YES
YES
VANOS solenoid (intake)
C40
GPO 6
YES
YES
Lambda heater-
GPO 7
YES
YES
Fuel tank vent valve
C42
GPO 8
YES
YES
E-Throttle with cruise control
C44, C43
GPO 13/GPO 14
YES
YES
Idle solenoid (MS42 only)
C46, C47
IGN 7/8
YES
YES
Not used for idle features using our base tune, but it is still wired...
DISA (intake)
C49
INJ 7
YES
YES
AC magnetic clutch*
D29
INJ 8
YES
YES
Parallel to OEM A/C clutch (D29). Disconnect A/C to use as a general output.
OEM knock sensors
C29, C31
KNOCK1, KNOCK2
YES
YES
Exhaust flap
D18
Yes, no ctrl
Yes, no ctrl
Only available on M54B30, this output is always active (no control option available)
External boost solenoid
GPO 9 (12V)
YES
YES
Crank trigger
C8
PULSE 1
YES
YES
Intake CAM trigger
C5
PULSE 2
YES
YES
Exhaust CAM trigger
C2
PULSE 3
YES
YES
BMW Steering wheel buttons
D27
PULSE 4
YES
YES
OE coolant temperature sensor (CLT)
C24
AIN 1
YES
YES
OE intake air temperature sensor (IAT)
C22
AIN 2
YES
YES
OE throttle position sensor (main)
C19
AIN 3
YES
YES
OE throttle position sensor (backup)
C10
AIN 4
YES
YES
OE engine oil temperature sensor
C27
AIN 5
YES
YES
No calibration available for this sensor.
OE Coolant outlet temperature
D39
AIN 6
YES
YES
OE pedal sensor (main)
D13 + C16 (MS42)
AIN 7
YES
YES
OE pedal sensor (backup)
D8 + C9 (MS42)
AIN 8
YES
YES
OE clutch switch
D23
AIN 9
YES
YES
Brake switch
BMW E46 330i (MS43) CAN
Secondary air pump
-
-
Wideband lambda sensor
Using external harness (included)
OE mass air mass flow sensor
-
-
NO
NO
Oil pressure switch
C26 (MS43) / D11 (MS42)
NO
NO
Oil level switch (MS42 only)
C39
NO
NO
Instrument cluster
BMW E46 330i (MS43) CAN
Bluetooth ( MDash)
EGT option
NO
Yes
Additional connector
The model-specific guide provides the following extra connector positions. Check its drawing for the view and pin labels; available outputs differ between TRACK and RACE.
Pin
GEN2 TRACK
GEN2 RACE
Usage
Note
1
+5V sensor supply
+5V sensor supply
Power source for external sensors
2
Sensor GND
Sensor GND
Sensor ground for external sensors
3
AIN 10
AIN 10
0-5V analog input
4
AIN 11
AIN 11
0-5V analog input
5
AIN 12
AIN 12
0-5V analog input
6
PULSE5+
AIN 17
7
+12V switched
+12V switched
Battery positive (+12V)
Output at ignition on
8
INJ 8
INJ 8
Output
Parallel to OEM A/C clutch (D29). Disconnect A/C to use as a general output.