MaxxECU Audi ME 7.1 / 7.1.1 / 7.5 GEN2 plug-in adapter joins a compatible GEN2 ECU to a specified factory engine harness. This is a vehicle-specific adapter system, not a different universal ECU model. Manufacturer's installation guide.
Applicability
The manufacturer identifies GEN2 RACE for its listed V6 and V8 applications, and TRACK or RACE for specified 1.8T applications. The guide distinguishes ME 7.1, ME 7.1.1 and ME 7.5 and indicates whether OE or external lambda sensors are required; some entries remain marked unknown. Check the exact vehicle, engine, ECU number, harness and hardware revision against the manufacturer guide before purchasing or installing.
Additional connector
The model-specific guide provides the following extra connector positions. Check its drawing for the view and pin labels; available outputs differ between TRACK and RACE.
| Pin | GEN2 TRACK | GEN2 RACE | Usage | Note |
|---|---|---|---|---|
| 1 | +5V sensor supply | +5V sensor supply | Power source for external sensors | |
| 2 | Sensor GND | Sensor GND | Sensor ground for external sensors | |
| 3 | AIN 11 | AIN 11 | 0-5V analog input | |
| 4 | AIN 12 | AIN 12 | 0-5V analog input | |
| 5 | AIN 13 | AIN 13 | 0-5V analog input | |
| 6 | INJ5 | INJ5 | Paralleled with ECU pin 104 (RS6 C5: PWM FAN. Others (when available): boost solenoid) | |
| 7 | +12V switched | +12V switched | Battery positive (+12V) | Output at ignition on |
| 8 | PULSE 4+ | PULSE 4+ | Pulse inputs | Can be used for ex ethanol content sensor |
| 9 | CAN1 L | CAN1 L | ||
| 10 | CAN1 H | CAN1 H | ||
| 11 | CAN2 L | AIN 20 | Different function depending on used MaxxECU | |
| 12 | CAN2 H | AIN 21 | Different function depending on used MaxxECU |
Documents and wiring
See the exact adapter and pinout guide for additional connectors, wideband wiring, power feeds, fuses and any limitations. The GEN2 plug-in index and MaxxECU family reference cover other hardware and applications. Review firmware and functions for the specific setup.
Source reviewed 17 November 2026.