
Link G4X AtomX is a programmable G4X wire-in engine-management ECU. One A loom. The documented V3 and newer hardware supports knock through pin 6; earlier hardware lacks that knock circuit. Link G4X AtomX quick-start guide.
Model identification and I/O
| Item | Documented details |
|---|---|
| ECU family | G4X |
| Outputs | 4 injection and 4 ignition drives |
| Programming | PCLink version matched to ECU generation and firmware |
| Connector and loom | See the exact-model guide, including connector keys, wire-side orientation and optional functions |
The manufacturer guidance and wiring identify the hardware; driver counts do not establish injector electrical compatibility or imply all multiplexed pins can be used at the same time.
Model-specific pinout and installation
The G4X AtomX quick-start guide provides the connector diagrams and installer I/O table. Refer to that version for numbered cavities, wire colours, supply, grounds, driver and sensor connection notes. Loom wire-side and ECU header views are identified on the diagram; do not transfer a pin number from another generation.
Software and further sources
Download software, firmware and full installation help from Link's download centre; identify the ECU generation and installed firmware before choosing a PCLink package. The legacy software list separates G5, G4X and G4+ compatibility. See also Link standalone ECUs.