Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
Standalone ECUs
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

Changes from revision 5 to revision 6

Removed text is struck through; added text is highlighted.

Product photograph: MaxxECU. Used with permission.

MaxxECU produces programmable standalone engine management systems configured with MTune. Product families include universal and vehicle-specific plug-in installations.

Models

MINI, STREET, SPORT, RACE, RACE H2O and PRO.GEN2 SPORT, GEN2 TRACK and GEN2 RACE: newer generation.V1: earlier generation, still included in the manufacturer's GEN1 wiring reference.

The manufacturer’s comparison describes supported features; GEN2 RACE product page includes product photographs. Do not assume connectors or capabilities match across versions.

Individual model references

These pages distinguish the original GEN1 units, the discontinued V1 and the newer GEN2 models. Sequential-cylinder figures depend on trigger and engine configuration; injector and ignition counts are separate from general-purpose outputs. Source: MaxxECU comparison and V1 product information.

ModelSequential cylinders, maximumInjector outputsIgnition outputsMINI44 high-impedance4STREET66 high-impedance6SPORT66 peak-and-hold6RACE88 peak-and-hold8RACE H2O88 peak-and-hold8PRO1216 peak-and-hold12GEN2 SPORT66 peak-and-hold6 selectable ignition/GPGEN2 TRACK88 peak-and-hold8 selectable ignition/GPGEN2 RACE1216 peak-and-hold12 selectable ignition/GPV188 peak-and-hold8

RACE H2O has a water-protected case; it is a version of the original RACE, not GEN2 RACE. V1 is discontinued. Revision, kit contents and vehicle-specific adapters must be checked separately.

GEN2 RACE MX1 pinout

Connector 1 (MX1), GEN2 RACE only. Pin numbers are the manufacturer's numbers; consult its connector drawing for orientation. Engine ground goes to the cylinder head; sensor ground must not be connected to engine ground. Manufacturer's full GEN2 pinouts and limitations

PinFunction1–4Ignition 1–4 respectively5–8GP outputs 1–4 (ground) respectively9Engine ground10Digital/VR 1 signal +11Digital/VR 1 signal −12Digital/VR 1 power supply13Digital/VR 1 shield14Sensor ground15CAN L16CAN H17GP output 5 (ground)18Digital/VR 2 signal +19Digital/VR 2 signal −20Digital/VR 2 power supply21Digital/VR 2 shield225 V supply23Digital/VR 3 signal +24Digital/VR 4 signal +2512 V supply 1, main ECU supply26–30Analogue inputs 1–5 respectively31–34Injectors 1–4 respectively

For GEN2 SPORT, TRACK and RACE MX1–MX4 as applicable, use the model pages and the full linked tables. The GEN1 connector tables cover STREET/SPORT/V1/RACE/PRO; pin functions differ. Revision-specific wiring downloads

Confirm the exact ECU, hardware revision and connector orientation before wiring. Configurable functions and electrical limits are model-dependent; consult the linked original diagrams.

GEN1 vehicle plug-in adapters

These are vehicle-specific adapter and loom packages for compatible universal ECUs. They are listed separately because the available factory functions, extra connectors and wiring vary by application and adapter revision. They are not new universal ECU models. See MaxxECU's GEN1 plug-in documentation index; GEN2 plug-in solutions require their own instructions.

Audi A4 (AEB)Audi S2 (3B)Audi S2/S4/S6 (AAN)Audi S3/A4 (ME 7.5)Audi S4/RS4 2.7 biturbo (ME 7.1)BMW M54 (MS42/MS43)Chevrolet Corvette C6 (E38 ECM)Ford Focus RS/ST 2005 - 2012 (ME 9.0) OEM CANFord Mustang 2011-2014 (Coyote 5.0)Mitsubishi EVO IV - VIIINissan S13 (CA18)Nissan S14 SR20 (76-pin)Nissan S14A/S15 SR20 (64-pin)Nissan Skyline R32/33 GT-R/GTS-T (RB25/26)Nissan Skyline R34 GT-R (RB26)Porsche 996 turbo 2001-2005Toyota Supra MKIV (2JZ)

GEN2 vehicle plug-in adaptersThese adapter packages are distinct from the GEN1 versions above and use specific TRACK or RACE hardware. The manufacturer supplies separate installation and wiring notes.Audi ME 7.1 / 7.1.1 / 7.5BMW M54 MS42 MS43Volvo S60 ME 7.0

Rendered revisions

Open each version to inspect formatting, tables and photographs.

Revision 5: MaxxECU standalone engine management

MaxxECU GEN2 RACE engine control unit

Product photograph: MaxxECU. Used with permission.

MaxxECU produces programmable standalone engine management systems configured with MTune. Product families include universal and vehicle-specific plug-in installations.

Models

  • MINI, STREET, SPORT, RACE, RACE H2O and PRO.
  • GEN2 SPORT, GEN2 TRACK and GEN2 RACE: newer generation.
  • V1: earlier generation, still included in the manufacturer's GEN1 wiring reference.

The manufacturer’s comparison describes supported features; GEN2 RACE product page includes product photographs. Do not assume connectors or capabilities match across versions.

Individual model references

These pages distinguish the original GEN1 units, the discontinued V1 and the newer GEN2 models. Sequential-cylinder figures depend on trigger and engine configuration; injector and ignition counts are separate from general-purpose outputs. Source: MaxxECU comparison and V1 product information.

ModelSequential cylinders, maximumInjector outputsIgnition outputs
MINI44 high-impedance4
STREET66 high-impedance6
SPORT66 peak-and-hold6
RACE88 peak-and-hold8
RACE H2O88 peak-and-hold8
PRO1216 peak-and-hold12
GEN2 SPORT66 peak-and-hold6 selectable ignition/GP
GEN2 TRACK88 peak-and-hold8 selectable ignition/GP
GEN2 RACE1216 peak-and-hold12 selectable ignition/GP
V188 peak-and-hold8

RACE H2O has a water-protected case; it is a version of the original RACE, not GEN2 RACE. V1 is discontinued. Revision, kit contents and vehicle-specific adapters must be checked separately.

GEN2 RACE MX1 pinout

Connector 1 (MX1), GEN2 RACE only. Pin numbers are the manufacturer's numbers; consult its connector drawing for orientation. Engine ground goes to the cylinder head; sensor ground must not be connected to engine ground. Manufacturer's full GEN2 pinouts and limitations

PinFunction
1–4Ignition 1–4 respectively
5–8GP outputs 1–4 (ground) respectively
9Engine ground
10Digital/VR 1 signal +
11Digital/VR 1 signal −
12Digital/VR 1 power supply
13Digital/VR 1 shield
14Sensor ground
15CAN L
16CAN H
17GP output 5 (ground)
18Digital/VR 2 signal +
19Digital/VR 2 signal −
20Digital/VR 2 power supply
21Digital/VR 2 shield
225 V supply
23Digital/VR 3 signal +
24Digital/VR 4 signal +
2512 V supply 1, main ECU supply
26–30Analogue inputs 1–5 respectively
31–34Injectors 1–4 respectively

For GEN2 SPORT, TRACK and RACE MX1–MX4 as applicable, use the model pages and the full linked tables. The GEN1 connector tables cover STREET/SPORT/V1/RACE/PRO; pin functions differ. Revision-specific wiring downloads

Confirm the exact ECU, hardware revision and connector orientation before wiring. Configurable functions and electrical limits are model-dependent; consult the linked original diagrams.

GEN1 vehicle plug-in adapters

These are vehicle-specific adapter and loom packages for compatible universal ECUs. They are listed separately because the available factory functions, extra connectors and wiring vary by application and adapter revision. They are not new universal ECU models. See MaxxECU's GEN1 plug-in documentation index; GEN2 plug-in solutions require their own instructions.

Revision 6: MaxxECU standalone engine management

MaxxECU GEN2 RACE engine control unit

Product photograph: MaxxECU. Used with permission.

MaxxECU produces programmable standalone engine management systems configured with MTune. Product families include universal and vehicle-specific plug-in installations.

Models

  • MINI, STREET, SPORT, RACE, RACE H2O and PRO.
  • GEN2 SPORT, GEN2 TRACK and GEN2 RACE: newer generation.
  • V1: earlier generation, still included in the manufacturer's GEN1 wiring reference.

The manufacturer’s comparison describes supported features; GEN2 RACE product page includes product photographs. Do not assume connectors or capabilities match across versions.

Individual model references

These pages distinguish the original GEN1 units, the discontinued V1 and the newer GEN2 models. Sequential-cylinder figures depend on trigger and engine configuration; injector and ignition counts are separate from general-purpose outputs. Source: MaxxECU comparison and V1 product information.

ModelSequential cylinders, maximumInjector outputsIgnition outputs
MINI44 high-impedance4
STREET66 high-impedance6
SPORT66 peak-and-hold6
RACE88 peak-and-hold8
RACE H2O88 peak-and-hold8
PRO1216 peak-and-hold12
GEN2 SPORT66 peak-and-hold6 selectable ignition/GP
GEN2 TRACK88 peak-and-hold8 selectable ignition/GP
GEN2 RACE1216 peak-and-hold12 selectable ignition/GP
V188 peak-and-hold8

RACE H2O has a water-protected case; it is a version of the original RACE, not GEN2 RACE. V1 is discontinued. Revision, kit contents and vehicle-specific adapters must be checked separately.

GEN2 RACE MX1 pinout

Connector 1 (MX1), GEN2 RACE only. Pin numbers are the manufacturer's numbers; consult its connector drawing for orientation. Engine ground goes to the cylinder head; sensor ground must not be connected to engine ground. Manufacturer's full GEN2 pinouts and limitations

PinFunction
1–4Ignition 1–4 respectively
5–8GP outputs 1–4 (ground) respectively
9Engine ground
10Digital/VR 1 signal +
11Digital/VR 1 signal −
12Digital/VR 1 power supply
13Digital/VR 1 shield
14Sensor ground
15CAN L
16CAN H
17GP output 5 (ground)
18Digital/VR 2 signal +
19Digital/VR 2 signal −
20Digital/VR 2 power supply
21Digital/VR 2 shield
225 V supply
23Digital/VR 3 signal +
24Digital/VR 4 signal +
2512 V supply 1, main ECU supply
26–30Analogue inputs 1–5 respectively
31–34Injectors 1–4 respectively

For GEN2 SPORT, TRACK and RACE MX1–MX4 as applicable, use the model pages and the full linked tables. The GEN1 connector tables cover STREET/SPORT/V1/RACE/PRO; pin functions differ. Revision-specific wiring downloads

Confirm the exact ECU, hardware revision and connector orientation before wiring. Configurable functions and electrical limits are model-dependent; consult the linked original diagrams.

GEN1 vehicle plug-in adapters

These are vehicle-specific adapter and loom packages for compatible universal ECUs. They are listed separately because the available factory functions, extra connectors and wiring vary by application and adapter revision. They are not new universal ECU models. See MaxxECU's GEN1 plug-in documentation index; GEN2 plug-in solutions require their own instructions.

GEN2 vehicle plug-in adapters

These adapter packages are distinct from the GEN1 versions above and use specific TRACK or RACE hardware. The manufacturer supplies separate installation and wiring notes.