Removed text is struck through; added text is highlighted.
MaxxECU Nissan S14 SR20 (76-pin) plug-in product image. Source: MaxxECU; used with permission. Illustrative kit; confirm included hardware for the particular package.
MaxxECU Nissan S14 SR20 (76-pin) plug-in adapter connects a compatible MaxxECU to an application-specific factory wiring loom. It is an adapter and installation package rather than a new universal ECU architecture. The published MaxxECU application guide identifies its intended configuration and connector details.
Identification and scope
Match the vehicle, engine, original ECU and connector, transmission, adapter revision and the MaxxECU unit to the guide. GEN1 adapters and earlier V1-specific adapters are not automatically interchangeable. The manufacturer's GEN1 adapter index separates the vehicle-specific instructions.
Vehicle and ECU functions
Manufacturer's mapping and availability for this particular adapter; a yes or no applies only to the configuration named in the table. Confirm adapter revision, hardware and calibration with the original guide.
The following is the extra connector table in the model-specific guide. Refer to its illustrated connector and installation notes for view, cable colours, electrical limits and revision; these positions are not the factory ECU connector.
PinDescriptionUsageNote1Wide band (VREF)2Wide band (VS)3Wide band (shield)4Wide band (H-)5GPO 7 / DIN 3Output or digital inputNot available on MaxxECU STREET6GPO 8OutputNot available on the REV2 adapter.7-8INJ 8OutputNot available on MaxxECU STREET9Wide band (IP)10Wide band (RCAL)11+12VOutput12+12VOutput13Engine GND14AIN 1temperature input15AIN 2temperature input16AIN 30-5V analog input
Installation and verification
The adapter may require an external wideband sensor, a MAP hose, additional connectors, or other changes depending on the application and kit. Do not assume that every factory function, emissions device, dashboard feature, air-conditioning function or transmission is supported. Check the model-specific tables, base configuration and full manufacturer installation guide for the exact unit before connection and calibration.
Documents
MaxxECU Nissan S14 SR20 (76-pin) adapter installation and pinoutGEN1 plug-in compatibility and wiring indexMaxxECU manufacturer and universal-model index
Sources reviewed 17 November 2026.
Rendered revisions
Open each version to inspect formatting, tables and photographs.
MaxxECU Nissan S14 SR20 (76-pin) plug-in adapter connects a compatible MaxxECU to an application-specific factory wiring loom. It is an adapter and installation package rather than a new universal ECU architecture. The published MaxxECU application guide identifies its intended configuration and connector details.
Identification and scope
Match the vehicle, engine, original ECU and connector, transmission, adapter revision and the MaxxECU unit to the guide. GEN1 adapters and earlier V1-specific adapters are not automatically interchangeable. The manufacturer's GEN1 adapter index separates the vehicle-specific instructions.
Vehicle and ECU functions
Manufacturer's mapping and availability for this particular adapter; a yes or no applies only to the configuration named in the table. Confirm adapter revision, hardware and calibration with the original guide.
Options
MaxxECU IO (REV1 adapter)
MaxxECU IO (REV2 adapter)
STREET
V1/RACE/PRO
DME relay
GPO 1
GPO 1
Yes
Yes
Boost solenoid
GPO 2
GPO 2
Yes
Yes
Fuel pump
GPO 3
GPO 3
Yes
Yes
AC magnetic clutch
GPO 4
GPO 4
No
Yes
Error light
GPO 5
GPO 5
No
Yes
Idle solenoid
GPO 6
GPO 6
No
Yes
Sequential injection
INJ 1-4
INJ 1-4
Yes
Yes
Seqeuantial ignition
IGN 1-4
IGN 1-4
Yes
Yes
Engine fan
INJ 5
INJ 5
Yes
Yes
VCT (where available)
INJ 6
INJ 6
Yes
Yes
AC FAN
INJ 7
INJ 7
No
Yes
Tachometer
IGN 5
GPO8
Yes
Yes
Vehicle speed
DIN 1
DIN 1
Yes
Yes
AC request
DIN 2
DIN 2
Yes
Yes
Bluetooth ( MDash)
-
No
Yes
Knock sensor(s)
-
No
No
EGT option
-
Yes, external
Yes, direct
Additional connector
The following is the extra connector table in the model-specific guide. Refer to its illustrated connector and installation notes for view, cable colours, electrical limits and revision; these positions are not the factory ECU connector.
Pin
Description
Usage
Note
1
Wide band (VREF)
2
Wide band (VS)
3
Wide band (shield)
4
Wide band (H-)
5
GPO 7 / DIN 3
Output or digital input
Not available on MaxxECU STREET
6
GPO 8
Output
Not available on the REV2 adapter.
7
-
8
INJ 8
Output
Not available on MaxxECU STREET
9
Wide band (IP)
10
Wide band (RCAL)
11
+12V
Output
12
+12V
Output
13
Engine GND
14
AIN 1
temperature input
15
AIN 2
temperature input
16
AIN 3
0-5V analog input
Installation and verification
The adapter may require an external wideband sensor, a MAP hose, additional connectors, or other changes depending on the application and kit. Do not assume that every factory function, emissions device, dashboard feature, air-conditioning function or transmission is supported. Check the model-specific tables, base configuration and full manufacturer installation guide for the exact unit before connection and calibration.
Revision 2: MaxxECU Nissan S14 SR20 (76-pin) plug-in adapterMaxxECU Nissan S14 SR20 (76-pin) plug-in product image. Source: MaxxECU; used with permission. Illustrative kit; confirm included hardware for the particular package.
MaxxECU Nissan S14 SR20 (76-pin) plug-in adapter connects a compatible MaxxECU to an application-specific factory wiring loom. It is an adapter and installation package rather than a new universal ECU architecture. The published MaxxECU application guide identifies its intended configuration and connector details.
Identification and scope
Match the vehicle, engine, original ECU and connector, transmission, adapter revision and the MaxxECU unit to the guide. GEN1 adapters and earlier V1-specific adapters are not automatically interchangeable. The manufacturer's GEN1 adapter index separates the vehicle-specific instructions.
Vehicle and ECU functions
Manufacturer's mapping and availability for this particular adapter; a yes or no applies only to the configuration named in the table. Confirm adapter revision, hardware and calibration with the original guide.
Options
MaxxECU IO (REV1 adapter)
MaxxECU IO (REV2 adapter)
STREET
V1/RACE/PRO
DME relay
GPO 1
GPO 1
Yes
Yes
Boost solenoid
GPO 2
GPO 2
Yes
Yes
Fuel pump
GPO 3
GPO 3
Yes
Yes
AC magnetic clutch
GPO 4
GPO 4
No
Yes
Error light
GPO 5
GPO 5
No
Yes
Idle solenoid
GPO 6
GPO 6
No
Yes
Sequential injection
INJ 1-4
INJ 1-4
Yes
Yes
Seqeuantial ignition
IGN 1-4
IGN 1-4
Yes
Yes
Engine fan
INJ 5
INJ 5
Yes
Yes
VCT (where available)
INJ 6
INJ 6
Yes
Yes
AC FAN
INJ 7
INJ 7
No
Yes
Tachometer
IGN 5
GPO8
Yes
Yes
Vehicle speed
DIN 1
DIN 1
Yes
Yes
AC request
DIN 2
DIN 2
Yes
Yes
Bluetooth ( MDash)
-
No
Yes
Knock sensor(s)
-
No
No
EGT option
-
Yes, external
Yes, direct
Additional connector
The following is the extra connector table in the model-specific guide. Refer to its illustrated connector and installation notes for view, cable colours, electrical limits and revision; these positions are not the factory ECU connector.
Pin
Description
Usage
Note
1
Wide band (VREF)
2
Wide band (VS)
3
Wide band (shield)
4
Wide band (H-)
5
GPO 7 / DIN 3
Output or digital input
Not available on MaxxECU STREET
6
GPO 8
Output
Not available on the REV2 adapter.
7
-
8
INJ 8
Output
Not available on MaxxECU STREET
9
Wide band (IP)
10
Wide band (RCAL)
11
+12V
Output
12
+12V
Output
13
Engine GND
14
AIN 1
temperature input
15
AIN 2
temperature input
16
AIN 3
0-5V analog input
Installation and verification
The adapter may require an external wideband sensor, a MAP hose, additional connectors, or other changes depending on the application and kit. Do not assume that every factory function, emissions device, dashboard feature, air-conditioning function or transmission is supported. Check the model-specific tables, base configuration and full manufacturer installation guide for the exact unit before connection and calibration.