MaxxECU Nissan S14 SR20 (76-pin) plug-in adapter connects a compatible MaxxECU to an application-specific factory wiring loom. It is an adapter and installation package rather than a new universal ECU architecture. The published MaxxECU application guide identifies its intended configuration and connector details.
Identification and scope
Match the vehicle, engine, original ECU and connector, transmission, adapter revision and the MaxxECU unit to the guide. GEN1 adapters and earlier V1-specific adapters are not automatically interchangeable. The manufacturer's GEN1 adapter index separates the vehicle-specific instructions.
Vehicle and ECU functions
Manufacturer's mapping and availability for this particular adapter; a yes or no applies only to the configuration named in the table. Confirm adapter revision, hardware and calibration with the original guide.
| Options | MaxxECU IO (REV1 adapter) | MaxxECU IO (REV2 adapter) | STREET | V1/RACE/PRO |
|---|---|---|---|---|
| DME relay | GPO 1 | GPO 1 | Yes | Yes |
| Boost solenoid | GPO 2 | GPO 2 | Yes | Yes |
| Fuel pump | GPO 3 | GPO 3 | Yes | Yes |
| AC magnetic clutch | GPO 4 | GPO 4 | No | Yes |
| Error light | GPO 5 | GPO 5 | No | Yes |
| Idle solenoid | GPO 6 | GPO 6 | No | Yes |
| Sequential injection | INJ 1-4 | INJ 1-4 | Yes | Yes |
| Seqeuantial ignition | IGN 1-4 | IGN 1-4 | Yes | Yes |
| Engine fan | INJ 5 | INJ 5 | Yes | Yes |
| VCT (where available) | INJ 6 | INJ 6 | Yes | Yes |
| AC FAN | INJ 7 | INJ 7 | No | Yes |
| Tachometer | IGN 5 | GPO8 | Yes | Yes |
| Vehicle speed | DIN 1 | DIN 1 | Yes | Yes |
| AC request | DIN 2 | DIN 2 | Yes | Yes |
| Bluetooth ( MDash) | - | No | Yes | |
| Knock sensor(s) | - | No | No | |
| EGT option | - | Yes, external | Yes, direct |
Additional connector
The following is the extra connector table in the model-specific guide. Refer to its illustrated connector and installation notes for view, cable colours, electrical limits and revision; these positions are not the factory ECU connector.
| Pin | Description | Usage | Note |
|---|---|---|---|
| 1 | Wide band (VREF) | ||
| 2 | Wide band (VS) | ||
| 3 | Wide band (shield) | ||
| 4 | Wide band (H-) | ||
| 5 | GPO 7 / DIN 3 | Output or digital input | Not available on MaxxECU STREET |
| 6 | GPO 8 | Output | Not available on the REV2 adapter. |
| 7 | - | ||
| 8 | INJ 8 | Output | Not available on MaxxECU STREET |
| 9 | Wide band (IP) | ||
| 10 | Wide band (RCAL) | ||
| 11 | +12V | Output | |
| 12 | +12V | Output | |
| 13 | Engine GND | ||
| 14 | AIN 1 | temperature input | |
| 15 | AIN 2 | temperature input | |
| 16 | AIN 3 | 0-5V analog input |
Installation and verification
The adapter may require an external wideband sensor, a MAP hose, additional connectors, or other changes depending on the application and kit. Do not assume that every factory function, emissions device, dashboard feature, air-conditioning function or transmission is supported. Check the model-specific tables, base configuration and full manufacturer installation guide for the exact unit before connection and calibration.
Documents
- MaxxECU Nissan S14 SR20 (76-pin) adapter installation and pinout
- GEN1 plug-in compatibility and wiring index
- MaxxECU manufacturer and universal-model index
Sources reviewed 17 November 2026.