Removed text is struck through; added text is highlighted.
MaxxECU Audi S3/A4 (ME 7.5) plug-in product image. Source: MaxxECU; used with permission. Illustrative kit; confirm included hardware for the particular package.
MaxxECU Audi S3/A4 (ME 7.5) plug-in adapter connects a compatible MaxxECU to an application-specific factory wiring loom. It is an adapter and installation package rather than a new universal ECU architecture. The published MaxxECU application guide identifies its intended configuration and connector details.
Identification and scope
Match the vehicle, engine, original ECU and connector, transmission, adapter revision and the MaxxECU unit to the guide. GEN1 adapters and earlier V1-specific adapters are not automatically interchangeable. The manufacturer's GEN1 adapter index separates the vehicle-specific instructions.
Manufacturer-listed examples
These examples and qualifications are transcribed from the manufacturer's adapter guide. A listed platform is not proof that every market or hardware combination is compatible; check the exact ECU, loom and transmission.
Manufacturer's mapping and availability for this particular adapter; a yes or no applies only to the configuration named in the table. Confirm adapter revision, hardware and calibration with the original guide.
OptionsOEM ECU PINMaxxECU IORACENoteE-Throttle117/118GPO 11/12YesBoost solenoid (OEM)104GPO 1YesVVT solenoid115GPO 2YesElectrical thermostat116GPO 3YesOnly on some models (A4, BEX)Canister64GPO 4YesFuel pump65GPO 5YesIAC cutoff valve105GPO 6YesTachometer37GPO 8YesMain relay21INJ 5YesError light47INJ 6YesAudi ME 7.5 CANSecondary air pump66INJ 7YesFAN (PWM controlled)24INJ 8YesOnly on some models (A4, BEX)Knock sensors (OEM)106,107KNOCK1, KNOCK2YesVehicle speed54DIN 1YesAlso from CAN, Audi ME 7.5 CANClutch switch39DIN 2YESEPC light48-CAN only!Audi ME 7.5 CANIntake air solenoid9-NoInstrument cluster/ABSAudi ME 7.5 CANYESTraction buttonAudi ME 7.5 CANYESFuel consumption81-NoAudi ME 7.5 CANBluetooth ( MDash)-YesEGT option-Yes, direct6 EGT direct in harness
Additional connector
The following is the extra connector table in the model-specific guide. Refer to its illustrated connector and installation notes for view, cable colours, electrical limits and revision; these positions are not the factory ECU connector.
PinDescriptionUsageNote1 (H)+5V sensor supply2 (G)Sensor GND3 (F)TPS AIN0-5V analog inputTPS analog input can be used for external sensors, such as oil pressure, fuel pressure etc4 (E)AIN 40-5V analog input5 (D)DIN/VR 4Digital input6 (C)DIN/VR 5Digital input7 (B)--8 (A)GPO 7 / DIN 3Output or digital input9 (S)10 (R)11 (P)12 (N)+12VOutput at ignition on13 (M)Engine GND14 (L)AIN 1temperature input15 (K)AIN 2temperature input16 (J)AIN 30-5V analog input
Installation and verification
The adapter may require an external wideband sensor, a MAP hose, additional connectors, or other changes depending on the application and kit. Do not assume that every factory function, emissions device, dashboard feature, air-conditioning function or transmission is supported. Check the model-specific tables, base configuration and full manufacturer installation guide for the exact unit before connection and calibration.
Documents
MaxxECU Audi S3/A4 (ME 7.5) adapter installation and pinoutGEN1 plug-in compatibility and wiring indexMaxxECU manufacturer and universal-model index
Sources reviewed 17 November 2026.
Rendered revisions
Open each version to inspect formatting, tables and photographs.
Revision 1: MaxxECU Audi S3/A4 (ME 7.5) plug-in adapter
MaxxECU Audi S3/A4 (ME 7.5) plug-in adapter connects a compatible MaxxECU to an application-specific factory wiring loom. It is an adapter and installation package rather than a new universal ECU architecture. The published MaxxECU application guide identifies its intended configuration and connector details.
Identification and scope
Match the vehicle, engine, original ECU and connector, transmission, adapter revision and the MaxxECU unit to the guide. GEN1 adapters and earlier V1-specific adapters are not automatically interchangeable. The manufacturer's GEN1 adapter index separates the vehicle-specific instructions.
Manufacturer-listed examples
These examples and qualifications are transcribed from the manufacturer's adapter guide. A listed platform is not proof that every market or hardware combination is compatible; check the exact ECU, loom and transmission.
Vehicle
Engine code
Year
LSU sensor
Note
Audi A4
APU
1999
External sensor needed
Audi S3
BAM
1999 - 2003
Uses stock LSU 4.2 sensor
Audi S3
AMK
2000-2003
Uses stock LSU 4.2 sensor
Audi S3
APY
1998-1999
External sensor needed
Audi S3
AUL
1999-2001
External sensor needed
Golf IV GTI
AUM/AUQ
2002+
Uses stock LSU 4.2 sensor
Skoda Octavia RS
AUQ
2000-2005
Uses stock LSU 4.2 sensor
Seat Leon
AMK/ARY/AUQ
2002+
Uses stock LSU 4.2 sensor
Seat Leon
ARY
2000-2004
Uses stock LSU 4.2 sensor
Seat Leon
AJQ
2001+
Uses stock LSU 4.2 sensor
Audi TT
APX
1999
External sensor needed
Audi TT
APX/APP/AJQ
2000+
External sensor needed
Audi TT
AUM/AUQ/ARY/BAM
2002+
Uses stock LSU 4.2 sensor
Audi A4
BEX
2002 - 2005
Uses stock LSU 4.2 sensor
Vehicle and ECU functions
Manufacturer's mapping and availability for this particular adapter; a yes or no applies only to the configuration named in the table. Confirm adapter revision, hardware and calibration with the original guide.
Options
OEM ECU PIN
MaxxECU IO
RACE
Note
E-Throttle
117/118
GPO 11/12
Yes
Boost solenoid (OEM)
104
GPO 1
Yes
VVT solenoid
115
GPO 2
Yes
Electrical thermostat
116
GPO 3
Yes
Only on some models (A4, BEX)
Canister
64
GPO 4
Yes
Fuel pump
65
GPO 5
Yes
IAC cutoff valve
105
GPO 6
Yes
Tachometer
37
GPO 8
Yes
Main relay
21
INJ 5
Yes
Error light
47
INJ 6
Yes
Audi ME 7.5 CAN
Secondary air pump
66
INJ 7
Yes
FAN (PWM controlled)
24
INJ 8
Yes
Only on some models (A4, BEX)
Knock sensors (OEM)
106,107
KNOCK1, KNOCK2
Yes
Vehicle speed
54
DIN 1
Yes
Also from CAN, Audi ME 7.5 CAN
Clutch switch
39
DIN 2
YES
EPC light
48
-
CAN only!
Audi ME 7.5 CAN
Intake air solenoid
9
-
No
Instrument cluster/ABS
Audi ME 7.5 CAN
YES
Traction button
Audi ME 7.5 CAN
YES
Fuel consumption
81
-
No
Audi ME 7.5 CAN
Bluetooth ( MDash)
-
Yes
EGT option
-
Yes, direct
6 EGT direct in harness
Additional connector
The following is the extra connector table in the model-specific guide. Refer to its illustrated connector and installation notes for view, cable colours, electrical limits and revision; these positions are not the factory ECU connector.
Pin
Description
Usage
Note
1 (H)
+5V sensor supply
2 (G)
Sensor GND
3 (F)
TPS AIN
0-5V analog input
TPS analog input can be used for external sensors, such as oil pressure, fuel pressure etc
4 (E)
AIN 4
0-5V analog input
5 (D)
DIN/VR 4
Digital input
6 (C)
DIN/VR 5
Digital input
7 (B)
-
-
8 (A)
GPO 7 / DIN 3
Output or digital input
9 (S)
10 (R)
11 (P)
12 (N)
+12V
Output at ignition on
13 (M)
Engine GND
14 (L)
AIN 1
temperature input
15 (K)
AIN 2
temperature input
16 (J)
AIN 3
0-5V analog input
Installation and verification
The adapter may require an external wideband sensor, a MAP hose, additional connectors, or other changes depending on the application and kit. Do not assume that every factory function, emissions device, dashboard feature, air-conditioning function or transmission is supported. Check the model-specific tables, base configuration and full manufacturer installation guide for the exact unit before connection and calibration.
Revision 2: MaxxECU Audi S3/A4 (ME 7.5) plug-in adapterMaxxECU Audi S3/A4 (ME 7.5) plug-in product image. Source: MaxxECU; used with permission. Illustrative kit; confirm included hardware for the particular package.
MaxxECU Audi S3/A4 (ME 7.5) plug-in adapter connects a compatible MaxxECU to an application-specific factory wiring loom. It is an adapter and installation package rather than a new universal ECU architecture. The published MaxxECU application guide identifies its intended configuration and connector details.
Identification and scope
Match the vehicle, engine, original ECU and connector, transmission, adapter revision and the MaxxECU unit to the guide. GEN1 adapters and earlier V1-specific adapters are not automatically interchangeable. The manufacturer's GEN1 adapter index separates the vehicle-specific instructions.
Manufacturer-listed examples
These examples and qualifications are transcribed from the manufacturer's adapter guide. A listed platform is not proof that every market or hardware combination is compatible; check the exact ECU, loom and transmission.
Vehicle
Engine code
Year
LSU sensor
Note
Audi A4
APU
1999
External sensor needed
Audi S3
BAM
1999 - 2003
Uses stock LSU 4.2 sensor
Audi S3
AMK
2000-2003
Uses stock LSU 4.2 sensor
Audi S3
APY
1998-1999
External sensor needed
Audi S3
AUL
1999-2001
External sensor needed
Golf IV GTI
AUM/AUQ
2002+
Uses stock LSU 4.2 sensor
Skoda Octavia RS
AUQ
2000-2005
Uses stock LSU 4.2 sensor
Seat Leon
AMK/ARY/AUQ
2002+
Uses stock LSU 4.2 sensor
Seat Leon
ARY
2000-2004
Uses stock LSU 4.2 sensor
Seat Leon
AJQ
2001+
Uses stock LSU 4.2 sensor
Audi TT
APX
1999
External sensor needed
Audi TT
APX/APP/AJQ
2000+
External sensor needed
Audi TT
AUM/AUQ/ARY/BAM
2002+
Uses stock LSU 4.2 sensor
Audi A4
BEX
2002 - 2005
Uses stock LSU 4.2 sensor
Vehicle and ECU functions
Manufacturer's mapping and availability for this particular adapter; a yes or no applies only to the configuration named in the table. Confirm adapter revision, hardware and calibration with the original guide.
Options
OEM ECU PIN
MaxxECU IO
RACE
Note
E-Throttle
117/118
GPO 11/12
Yes
Boost solenoid (OEM)
104
GPO 1
Yes
VVT solenoid
115
GPO 2
Yes
Electrical thermostat
116
GPO 3
Yes
Only on some models (A4, BEX)
Canister
64
GPO 4
Yes
Fuel pump
65
GPO 5
Yes
IAC cutoff valve
105
GPO 6
Yes
Tachometer
37
GPO 8
Yes
Main relay
21
INJ 5
Yes
Error light
47
INJ 6
Yes
Audi ME 7.5 CAN
Secondary air pump
66
INJ 7
Yes
FAN (PWM controlled)
24
INJ 8
Yes
Only on some models (A4, BEX)
Knock sensors (OEM)
106,107
KNOCK1, KNOCK2
Yes
Vehicle speed
54
DIN 1
Yes
Also from CAN, Audi ME 7.5 CAN
Clutch switch
39
DIN 2
YES
EPC light
48
-
CAN only!
Audi ME 7.5 CAN
Intake air solenoid
9
-
No
Instrument cluster/ABS
Audi ME 7.5 CAN
YES
Traction button
Audi ME 7.5 CAN
YES
Fuel consumption
81
-
No
Audi ME 7.5 CAN
Bluetooth ( MDash)
-
Yes
EGT option
-
Yes, direct
6 EGT direct in harness
Additional connector
The following is the extra connector table in the model-specific guide. Refer to its illustrated connector and installation notes for view, cable colours, electrical limits and revision; these positions are not the factory ECU connector.
Pin
Description
Usage
Note
1 (H)
+5V sensor supply
2 (G)
Sensor GND
3 (F)
TPS AIN
0-5V analog input
TPS analog input can be used for external sensors, such as oil pressure, fuel pressure etc
4 (E)
AIN 4
0-5V analog input
5 (D)
DIN/VR 4
Digital input
6 (C)
DIN/VR 5
Digital input
7 (B)
-
-
8 (A)
GPO 7 / DIN 3
Output or digital input
9 (S)
10 (R)
11 (P)
12 (N)
+12V
Output at ignition on
13 (M)
Engine GND
14 (L)
AIN 1
temperature input
15 (K)
AIN 2
temperature input
16 (J)
AIN 3
0-5V analog input
Installation and verification
The adapter may require an external wideband sensor, a MAP hose, additional connectors, or other changes depending on the application and kit. Do not assume that every factory function, emissions device, dashboard feature, air-conditioning function or transmission is supported. Check the model-specific tables, base configuration and full manufacturer installation guide for the exact unit before connection and calibration.