MaxxECU Audi S3/A4 (ME 7.5) plug-in adapter connects a compatible MaxxECU to an application-specific factory wiring loom. It is an adapter and installation package rather than a new universal ECU architecture. The published MaxxECU application guide identifies its intended configuration and connector details.
Identification and scope
Match the vehicle, engine, original ECU and connector, transmission, adapter revision and the MaxxECU unit to the guide. GEN1 adapters and earlier V1-specific adapters are not automatically interchangeable. The manufacturer's GEN1 adapter index separates the vehicle-specific instructions.
Manufacturer-listed examples
These examples and qualifications are transcribed from the manufacturer's adapter guide. A listed platform is not proof that every market or hardware combination is compatible; check the exact ECU, loom and transmission.
| Vehicle | Engine code | Year | LSU sensor | Note |
|---|---|---|---|---|
| Audi A4 | APU | 1999 | External sensor needed | |
| Audi S3 | BAM | 1999 - 2003 | Uses stock LSU 4.2 sensor | |
| Audi S3 | AMK | 2000-2003 | Uses stock LSU 4.2 sensor | |
| Audi S3 | APY | 1998-1999 | External sensor needed | |
| Audi S3 | AUL | 1999-2001 | External sensor needed | |
| Golf IV GTI | AUM/AUQ | 2002+ | Uses stock LSU 4.2 sensor | |
| Skoda Octavia RS | AUQ | 2000-2005 | Uses stock LSU 4.2 sensor | |
| Seat Leon | AMK/ARY/AUQ | 2002+ | Uses stock LSU 4.2 sensor | |
| Seat Leon | ARY | 2000-2004 | Uses stock LSU 4.2 sensor | |
| Seat Leon | AJQ | 2001+ | Uses stock LSU 4.2 sensor | |
| Audi TT | APX | 1999 | External sensor needed | |
| Audi TT | APX/APP/AJQ | 2000+ | External sensor needed | |
| Audi TT | AUM/AUQ/ARY/BAM | 2002+ | Uses stock LSU 4.2 sensor | |
| Audi A4 | BEX | 2002 - 2005 | Uses stock LSU 4.2 sensor |
Vehicle and ECU functions
Manufacturer's mapping and availability for this particular adapter; a yes or no applies only to the configuration named in the table. Confirm adapter revision, hardware and calibration with the original guide.
| Options | OEM ECU PIN | MaxxECU IO | RACE | Note |
|---|---|---|---|---|
| E-Throttle | 117/118 | GPO 11/12 | Yes | |
| Boost solenoid (OEM) | 104 | GPO 1 | Yes | |
| VVT solenoid | 115 | GPO 2 | Yes | |
| Electrical thermostat | 116 | GPO 3 | Yes | Only on some models (A4, BEX) |
| Canister | 64 | GPO 4 | Yes | |
| Fuel pump | 65 | GPO 5 | Yes | |
| IAC cutoff valve | 105 | GPO 6 | Yes | |
| Tachometer | 37 | GPO 8 | Yes | |
| Main relay | 21 | INJ 5 | Yes | |
| Error light | 47 | INJ 6 | Yes | Audi ME 7.5 CAN |
| Secondary air pump | 66 | INJ 7 | Yes | |
| FAN (PWM controlled) | 24 | INJ 8 | Yes | Only on some models (A4, BEX) |
| Knock sensors (OEM) | 106,107 | KNOCK1, KNOCK2 | Yes | |
| Vehicle speed | 54 | DIN 1 | Yes | Also from CAN, Audi ME 7.5 CAN |
| Clutch switch | 39 | DIN 2 | YES | |
| EPC light | 48 | - | CAN only! | Audi ME 7.5 CAN |
| Intake air solenoid | 9 | - | No | |
| Instrument cluster/ABS | Audi ME 7.5 CAN | YES | ||
| Traction button | Audi ME 7.5 CAN | YES | ||
| Fuel consumption | 81 | - | No | Audi ME 7.5 CAN |
| Bluetooth ( MDash) | - | Yes | ||
| EGT option | - | Yes, direct | 6 EGT direct in harness |
Additional connector
The following is the extra connector table in the model-specific guide. Refer to its illustrated connector and installation notes for view, cable colours, electrical limits and revision; these positions are not the factory ECU connector.
| Pin | Description | Usage | Note |
|---|---|---|---|
| 1 (H) | +5V sensor supply | ||
| 2 (G) | Sensor GND | ||
| 3 (F) | TPS AIN | 0-5V analog input | TPS analog input can be used for external sensors, such as oil pressure, fuel pressure etc |
| 4 (E) | AIN 4 | 0-5V analog input | |
| 5 (D) | DIN/VR 4 | Digital input | |
| 6 (C) | DIN/VR 5 | Digital input | |
| 7 (B) | - | - | |
| 8 (A) | GPO 7 / DIN 3 | Output or digital input | |
| 9 (S) | |||
| 10 (R) | |||
| 11 (P) | |||
| 12 (N) | +12V | Output at ignition on | |
| 13 (M) | Engine GND | ||
| 14 (L) | AIN 1 | temperature input | |
| 15 (K) | AIN 2 | temperature input | |
| 16 (J) | AIN 3 | 0-5V analog input |
Installation and verification
The adapter may require an external wideband sensor, a MAP hose, additional connectors, or other changes depending on the application and kit. Do not assume that every factory function, emissions device, dashboard feature, air-conditioning function or transmission is supported. Check the model-specific tables, base configuration and full manufacturer installation guide for the exact unit before connection and calibration.
Documents
- MaxxECU Audi S3/A4 (ME 7.5) adapter installation and pinout
- GEN1 plug-in compatibility and wiring index
- MaxxECU manufacturer and universal-model index
Sources reviewed 17 November 2026.