Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
Haltech standalone ECUs
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

Haltech Elite 2500 is a programmable engine-management ECU in Haltech's Elite family. Eight injector and ignition channels, 10 analogue inputs and half-bridge outputs for stepper or electronic throttle. Haltech universal comparison.

Identification and I/O

ItemManufacturer comparison
Injector channels8, peak-and-hold
Ignition channels8
Digital pulsed outputs5
MAP sensor4 bar internal
Tuning softwareESP for Elite firmware 2.xx; NSP for Elite firmware 3.xx; verify installed firmware

Counts do not imply that all functions are available simultaneously: driver allocation, injector impedance, ignition type, firmware and calibration must suit the installation.

Pinout and wiring

Use the manufacturer wiring diagrams and select the Elite 2500 ECU and actual harness or part number. Drawings for other models and plug-in adaptors are not a substitute for the identified unit. Verify connector orientation, power and grounds, current limits and output assignment before connection.

Software and further information

Download the matching software and firmware through Haltech downloads. For family context and other models see Haltech standalone ECUs. Compare the label, serial, connectors and map backup before replacing a controller.

Haltech groups the Elite 2500 basic, premium and race-expansion harness wiring diagrams with its Elite 1500/2500/REM downloads. Select the exact 2500 harness entry on that page.