Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
DTAFast standalone engine management
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

DTAFast's 30 March 2001 schematic explicitly labels both E48EXP and E48EXP ignition only. The diagram depicts two coil outputs for a wasted-spark example and a 25-position connector. Manufacturer document.

Identification and operating context

This is included for identification as an ignition controller. Record the exact product label, hardware, firmware and loom; do not assume compatibility with a similarly named fuel-and-ignition ECU. See DTAFast family overview.

Wiring

The shared schematic also shows injector connections, but that does not establish working fuel drivers in an ignition-only build. Confirm actual hardware, firmware, pin population and connector orientation with DTAFast. DTAFast wiring reference. Establish fused supplies, grounds, sensor connections and coil-driver limits for the specific unit.