Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
DTAFast standalone engine management
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

DTAFast's S-series feature matrix states that an ignition-only S40 version was available. A distributor lists it as S40i; identify the exact case label and firmware rather than assuming that every S40 has functioning fuel outputs. Manufacturer document.

Identification and operating context

This is included for identification as an ignition controller. Record the exact product label, hardware, firmware and loom; do not assume compatibility with a similarly named fuel-and-ignition ECU. See DTAFast family overview.

Wiring

The manufacturer S40 Pro diagram is a family reference, not proof that every function is populated in an ignition-only ECU. Obtain the exact build information from DTAFast before wiring. DTAFast wiring reference. Establish fused supplies, grounds, sensor connections and coil-driver limits for the specific unit.