Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
SCS Delta standalone ECUs
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

Changes from revision 1 to revision 1

Removed text is struck through; added text is highlighted.

Storm is an earlier Specialist Control Systems engine ECU family. SCS specifically lists Storm among the units that use the final SXT Legacy software and directs owners to contact it about legacy base-map compatibility. The separately listed Storm 2 is covered on its own model page. SCS software page · SCS base maps.

Replacement and software

SCS's legacy conversion page says Delta 400 is a direct plug-in replacement for Storm ECUs without wiring changes. It also separately identifies Storm 2 in a discontinued hardware programme. Since neither statement establishes all firmware, vehicle or harness variants, confirm the precise ECU, original map and application with SCS before swapping. SCS legacy upgrade notes.

Wiring evidence

A complete model-specific Storm connector table was not verified in the reviewed sources. The replacement's connector and functions must not be assumed to document every earlier Storm. Record the hardware label and obtain the matching loom and pinout documentation. Browse the SCS family index.

Rendered revisions

Open each version to inspect formatting, tables and photographs.

Revision 1: SC Storm

Storm is an earlier Specialist Control Systems engine ECU family. SCS specifically lists Storm among the units that use the final SXT Legacy software and directs owners to contact it about legacy base-map compatibility. The separately listed Storm 2 is covered on its own model page. SCS software page · SCS base maps.

Replacement and software

SCS's legacy conversion page says Delta 400 is a direct plug-in replacement for Storm ECUs without wiring changes. It also separately identifies Storm 2 in a discontinued hardware programme. Since neither statement establishes all firmware, vehicle or harness variants, confirm the precise ECU, original map and application with SCS before swapping. SCS legacy upgrade notes.

Wiring evidence

A complete model-specific Storm connector table was not verified in the reviewed sources. The replacement's connector and functions must not be assumed to document every earlier Storm. Record the hardware label and obtain the matching loom and pinout documentation. Browse the SCS family index.

Revision 1: SC Storm

Storm is an earlier Specialist Control Systems engine ECU family. SCS specifically lists Storm among the units that use the final SXT Legacy software and directs owners to contact it about legacy base-map compatibility. The separately listed Storm 2 is covered on its own model page. SCS software page · SCS base maps.

Replacement and software

SCS's legacy conversion page says Delta 400 is a direct plug-in replacement for Storm ECUs without wiring changes. It also separately identifies Storm 2 in a discontinued hardware programme. Since neither statement establishes all firmware, vehicle or harness variants, confirm the precise ECU, original map and application with SCS before swapping. SCS legacy upgrade notes.

Wiring evidence

A complete model-specific Storm connector table was not verified in the reviewed sources. The replacement's connector and functions must not be assumed to document every earlier Storm. Record the hardware label and obtain the matching loom and pinout documentation. Browse the SCS family index.