Removed text is struck through; added text is highlighted.
Manufacturer product image of E36X application ECU: Link ECU. Permission to republish confirmed by the user.
Link G4X E36X is a vehicle-specific programmable plug-in ECU for the BMW E36 application listed in Link's model-specific manuals index. It is an application board, rather than the universal wire-in ECU. Check the exact vehicle, market, engine, original ECU and board part number against the manufacturer's E36X installation manual.
Identification and installation
Record the Link model label and revision, donor factory ECU connector and car's engine and year. Plug-in boards connect to particular factory-harness layouts; the family or vehicle name alone does not establish every model-year or transmission combination. The manufacturer manual gives the supported application and any installation or configuration notes for this board.
G4X plug-in platforms offer configurable fuel and ignition control but available channels and features depend on the original header and board. The G4X plug-in general specifications are conditional on the particular application and do not mean every input is brought out to the factory harness.
Pinout and tuning
The E36X installation manual is the model-specific source for board pinouts, expansion connections, electrical cautions and startup configuration. Use its connector orientation and the exact board version; do not copy a wire-in ECU pinout onto a factory harness. PCLink and manual downloads; Link manufacturer overview.
Manufacturer connector schedulesFrom Link's E36X installation manual (2025). The manual states that pinouts are viewed looking into the ECU from the wire side. A dash reproduces an unspecified source field; nc is Link's label. Link marks main-header pins 1 and 38 as sharing Aux 8; injector drives 7 and 8 are not exposed. The 2025 manual identifies the ignition outputs as having internal ignitors. Confirm factory ECU and wiring compatibility for the vehicle.Main header positionsFactory pinLink ECU channelFactory function1Aux 8 (Shared with pin 38)Fuel Pump Relay50Ign 1 (Internal Ignitor)Ignition2Aux 1Idle Speed Control (Close)51Ign 2 (Internal Ignitor)Ignition3Injector 5Injection52Ign 3 (Internal Ignitor)Ignition4Injector 6Injection53nc—5Injector 4Injection54+14V from Main relayECU Power6Ground—55Ground (Ignition)—7Aux 3Camshaft Solenoid56Ignition SwitchControls Main Relay8Aux 6Check Engine Light57DI 4Timing Intervention Request (Transmission Control Module)9nc—58nc—10nc—59+5V Out—11Aux 7Throttle Valve Position (Transmission Control Module)60nc—12nc—61nc—13An Volt 3Oxy Sensor62nc—14nc—63nc—15Ground—64DI 3Blower Idle Up16Trig 1—65DI 2A/C Request17Trig 2—66nc—18nc—67nc—19nc—68nc—20nc—69Knock—21nc—70Knock—22nc—71Ground (Knock)—23Ign 4 (Internal Ignitor)Ignition72nc—24Ign 6 (Internal Ignitor)Ignition73AnVolt 2TPS (Main)25Ign 5 (Internal Ignitor)Ignition74nc—26nc (Constant 12V)—75nc—27Main Relay Control—76nc—28Ground (Shielding)—77AnTemp 2IAT29Aux 2Idle Speed Control (Open)78AnTemp 1ECT30nc—79nc—31Injector 3Injection80nc—32Injector 2Injection81DI 5Automatic Trans Range Switch (Transmission Control Module)33Injector 1Injection82nc—34Ground—83nc—35nc—84nc—36Ignition 8 (Aux)Purge Solenoid85nc—37nc—86nc—38Aux 8 (Shared with pin 1)O2 Sensor Heater87nc—39nc—88nc—40Ground (O2 sensor)—41AnVolt 6MAF Hot Wire Input (spare)42DI 1Speed43Ground (Trigger 1)—44Ground (Sensors)—45Ground (Shielding)—46Aux 4Fuel Consumption Signal47Aux 5Tachometer48Ignition 7 (Aux)Air Con Compressor49nc—Expansion connectorPinLink ECU channelFactory function1Gnd—2+5V Out—3DI 7—4DI 8—5AnVolt 5—6AnVolt 4—7AnTemp 4—8AnTemp 3—Internal sensorPositionLink ECU channelFunctionInternal MAPAnVolt 1MAPCAN 1/RS232 ConnectorPinFunctionWire colour1Comms GNDBrown2CAN1 LGreen3CAN1 HWhite4RS232-RXGrey5RS232-TXYellowCAN 2/OBD ConnectorPinFunctionWire colour1GNDBrown2CAN2 LGreen3CAN2 HWhite4NCGrey5+14VYellow
Rendered revisions
Open each version to inspect formatting, tables and photographs.
Revision 1: Link G4X E36X plug-in ECU
Link G4X E36X is a vehicle-specific programmable plug-in ECU for the BMW E36 application listed in Link's model-specific manuals index. It is an application board, rather than the universal wire-in ECU. Check the exact vehicle, market, engine, original ECU and board part number against the manufacturer's E36X installation manual.
Identification and installation
Record the Link model label and revision, donor factory ECU connector and car's engine and year. Plug-in boards connect to particular factory-harness layouts; the family or vehicle name alone does not establish every model-year or transmission combination. The manufacturer manual gives the supported application and any installation or configuration notes for this board.
G4X plug-in platforms offer configurable fuel and ignition control but available channels and features depend on the original header and board. The G4X plug-in general specifications are conditional on the particular application and do not mean every input is brought out to the factory harness.
Pinout and tuning
The E36X installation manual is the model-specific source for board pinouts, expansion connections, electrical cautions and startup configuration. Use its connector orientation and the exact board version; do not copy a wire-in ECU pinout onto a factory harness. PCLink and manual downloads; Link manufacturer overview.
Revision 3: Link G4X E36X plug-in ECUManufacturer product image of E36X application ECU: Link ECU. Permission to republish confirmed by the user.
Link G4X E36X is a vehicle-specific programmable plug-in ECU for the BMW E36 application listed in Link's model-specific manuals index. It is an application board, rather than the universal wire-in ECU. Check the exact vehicle, market, engine, original ECU and board part number against the manufacturer's E36X installation manual.
Identification and installation
Record the Link model label and revision, donor factory ECU connector and car's engine and year. Plug-in boards connect to particular factory-harness layouts; the family or vehicle name alone does not establish every model-year or transmission combination. The manufacturer manual gives the supported application and any installation or configuration notes for this board.
G4X plug-in platforms offer configurable fuel and ignition control but available channels and features depend on the original header and board. The G4X plug-in general specifications are conditional on the particular application and do not mean every input is brought out to the factory harness.
Pinout and tuning
The E36X installation manual is the model-specific source for board pinouts, expansion connections, electrical cautions and startup configuration. Use its connector orientation and the exact board version; do not copy a wire-in ECU pinout onto a factory harness. PCLink and manual downloads; Link manufacturer overview.
Manufacturer connector schedules
From Link's E36X installation manual (2025). The manual states that pinouts are viewed looking into the ECU from the wire side. A dash reproduces an unspecified source field; nc is Link's label. Link marks main-header pins 1 and 38 as sharing Aux 8; injector drives 7 and 8 are not exposed. The 2025 manual identifies the ignition outputs as having internal ignitors. Confirm factory ECU and wiring compatibility for the vehicle.
Main header positions
Factory pin
Link ECU channel
Factory function
1
Aux 8 (Shared with pin 38)
Fuel Pump Relay
50
Ign 1 (Internal Ignitor)
Ignition
2
Aux 1
Idle Speed Control (Close)
51
Ign 2 (Internal Ignitor)
Ignition
3
Injector 5
Injection
52
Ign 3 (Internal Ignitor)
Ignition
4
Injector 6
Injection
53
nc
—
5
Injector 4
Injection
54
+14V from Main relay
ECU Power
6
Ground
—
55
Ground (Ignition)
—
7
Aux 3
Camshaft Solenoid
56
Ignition Switch
Controls Main Relay
8
Aux 6
Check Engine Light
57
DI 4
Timing Intervention Request (Transmission Control Module)
9
nc
—
58
nc
—
10
nc
—
59
+5V Out
—
11
Aux 7
Throttle Valve Position (Transmission Control Module)
60
nc
—
12
nc
—
61
nc
—
13
An Volt 3
Oxy Sensor
62
nc
—
14
nc
—
63
nc
—
15
Ground
—
64
DI 3
Blower Idle Up
16
Trig 1
—
65
DI 2
A/C Request
17
Trig 2
—
66
nc
—
18
nc
—
67
nc
—
19
nc
—
68
nc
—
20
nc
—
69
Knock
—
21
nc
—
70
Knock
—
22
nc
—
71
Ground (Knock)
—
23
Ign 4 (Internal Ignitor)
Ignition
72
nc
—
24
Ign 6 (Internal Ignitor)
Ignition
73
AnVolt 2
TPS (Main)
25
Ign 5 (Internal Ignitor)
Ignition
74
nc
—
26
nc (Constant 12V)
—
75
nc
—
27
Main Relay Control
—
76
nc
—
28
Ground (Shielding)
—
77
AnTemp 2
IAT
29
Aux 2
Idle Speed Control (Open)
78
AnTemp 1
ECT
30
nc
—
79
nc
—
31
Injector 3
Injection
80
nc
—
32
Injector 2
Injection
81
DI 5
Automatic Trans Range Switch (Transmission Control Module)