Omex 700 is a historical engine-management identity distinct from the 710 label. Contemporary application accounts identify an OMEM700 programmable management ECU; AiM includes the 700 in its compatible Omex communication list. These references do not establish that every 700 has the same outputs or wiring as the later 710. Contemporary installation and model identification · AiM compatible model list.
Telemetry and software
A CANchecked display integration guide describes RS232 telemetry for the 700 and specifies firmware 0.70C for its documented integration and MAP4000 telemetry configuration. That is a requirement of the described display setup, not proof that all Omex 700s carry that firmware or that every dashboard uses those settings. CANchecked 600/700 connection guide.
Connector and pinout
A complete independently verified Omex 700 engine connector pinout was not established in the sources reviewed. AiM's document groups several Gems/Omex models in one communications guide, and the 710 installation manual is separately labelled; neither should be treated as proof of the entire 700 loom assignment. Obtain the exact serial-specific diagram from Omex before wiring. See the Omex family index.