Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
Standalone ECUs
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

Emerald generations and specifications

ModelPeriod or identificationControl and communications
K6+Generic and preconfigured packagesSix ignition and six injection outputs; triple map switching, RS232 and CAN.
K6Introduced early 201032-bit PowerPC, six ignition and injection drivers; three engine-speed triggers.
K3February 2007–April 2010Six injector and three internal coil drivers; RS232, CAN, triple maps.
M3DKMarch 2001–February 200732-bit; four injection and two ignition drivers. Some units were upgraded to K3.
M3DEarlier generation before M3DK16-bit predecessor; detailed hardware and wiring unverified.

Sources: Emerald's earlier ECU specifications, K6 specification and K6+ generic.

K6-family vehicle adapters

These are separately sold adapters, not separate ECU generations. The manufacturer's list includes Audi AAN/ABY; Volkswagen VR6 AAA/ABV and R32 ME7.1.1; VW/Audi 1.8T AGU and ME7.5; Ford ST150 and 1.6/1.7 VVT; Peugeot 106/306; Lotus Elise S1 EU2 VVC, S2 K-series, Exige/340R and EU3 VVC/non-VVC; and TVR Cerbera AJP V8. Exact harness, engine and ECU configuration matter.

Individual ECU model references

Further historically documented names are listed below; a name without a linked model page does not yet have a standalone reference.

Emerald M3D supplies programmable standalone engine management, including generic and pre-configured ECUs. K6+ has six injector and six ignition drivers, configurable load sensing, map switching and CAN. Emerald K6+ product details.

Emerald K6+ ECU
K6+ promotional image: Emerald M3D. Permission to republish confirmed by the user.

Models and history

  • K6 and K6+: K6-family programmable ECUs, with generic and pre-configured variants. K6+ specifications; manuals.
  • K3: earlier ECU sharing a software and manual family with K6. Earlier ECUs.
  • M3DK: 32-bit ECU made March 2001 to February 2007; some examples were upgraded to K3 specification. Identify actual hardware and serial, not only an old label. Emerald history.
  • M3D: the earlier 16-bit generation preceding M3DK. Emerald history.

Emerald notes that individual units may have bespoke software for non-standard installations; quote the serial number when identifying the correct software. Software and manuals.

Example pinout: Emerald K3 main connector

36-way positions and generic functions from Emerald K3 manual v057, page 56. Use moulded cavity numbers and the manufacturer's connector drawing to establish viewing orientation; do not assume this is a K6, K6+ or bespoke ECU pinout.

PinFunction
1Injector 4 / AuxOut1
2IACV2 / AuxOut2
3IACV1 / IACV PWM / AuxOut3
4Ignition 3 / main relay
5Ignition 2 / AuxOut5
6Cooling fan relay
7Narrowband oxygen signal, 0–1 V
8Throttle position signal
9+5 V sensor supply, 100 mA maximum
10AuxIn10
11Ignition sense, switched +12 V
12Tacho
13Immobiliser / EGT digital input
14+8 V sensor supply
15Cam phase / custom input
16Air temperature
17Injector 5 / ignition 4 / AuxOut17
18Oxygen sensor signal earth
19Shift light / AuxOut19
20Fuel pump relay
21Injector 6 / configurable auxiliary output
22IACV3 / AuxOut22
23Injector 2
24Injector 1
25Ignition 1
26Injector 3 / AuxOut26
27IACV4 / AuxOut27
28+12 V ignition supply
29ECU earth
30Sensor earth
31Main trigger input
32Main trigger sensor earth
33Coolant temperature
34AuxIn34
35AuxIn35
36AuxIn36 / AuxOut36

Slash-separated functions depend on configuration. The K3 manual describes driver outputs except tacho as switched earths, and specifies high-impedance injectors or appropriately sized ballast for low-impedance injectors. Confirm hardware and configuration before connecting coils and injectors.

Further documentation

Sources reviewed 17 November 2026.